Anton Bauer Dionic 26V 98Wh Gold Mount Plus Battery

€600.00*

gross: €714.00

Free shipping

Product number: SW23290

Anton Bauer Dionic 26V 98Wh

The DIONIC 26V 98Wh battery is the lightweight and agile alternative to block batteries for high-powered, versatile, travel-safe power on set and the perfect solution to run the demanding, power-hungry devices needed for cinematography today.

Power multi-function creative lighting such as the Litepanels Gemini range or similar high-power-draw LED panels, high-end cine cameras including the ARRI Alexa LF, ARRI Alexa SXT and ARRI Alexa 65 cameras.

Have confidence that your equipment will always be ready when you need it. Know your runtime down to the minute with the on-board LCD display or in your camera viewfinder.

The DIONIC 26V Advantage

Faster charging – quicker than dual-voltage batteries for less downtime.
More accurate – more predictable than dual-voltage batteries for dependability.
More power – more amps than dual-voltage batteries for safer consistent power.
Longer Life – dedicated single voltage cells reduce stress to live longer.

Gold Mount Plus

The Gold Mount Plus mount on DIONIC 26V batteries is not only the industry’s most secure battery lock system but also delivers the most reliable communications with cameras or lights for accurate run time data.

When your production demands peak performance from your equipment, DIONIC 26V batteries ensure that you have the power.

Technical data

Range: Dionic
Weight: 930 g
Width: 99 mm
Height: 131 mm
Depth: 71 mm
Mount type: Gold Mount
Chemistry: Lithium-ion
Voltage: 26 V
Capacity: 99 Wh
Max current: 12 Amps
Power tap: No
USB: No
Warranty: 2 Year

Related links of the manufacturer

Further products by Anton Bauer

Accessory Items

Free shipping

Wooden Camera 26V Sharkfin Gold Mount Plus (Alexa LF, 65, SXT)

Wooden Camera 26V Sharkfin Gold Mount Plus SKU: 273100 Anton Bauer 26V Sharkfin Gold Mount Plus (Alexa LF, 65, SXT) attaches two 26V batteries in a Sharkfin configuration directly to the back of the ARRI Alexa LF, 65, SXT, and every Alexa down to the Classic EV to provide power through the rear battery contacts without cables. Internal circuit board prioritizes the 2pin Fischer DC Input, allowing 24V block batteries to be used first, leaving the on-board batteries fully charged. Hot swapping between battery sources is possible and OLED screen on side panel provides voltage data, battery capacity, and active source information. Two Power Taps are provided at a regulated 15V and current is monitored. Should the user exceed the current threshold, the plate will cut power to the P-Taps, leaving the camera operating normally. A warning message will appear on the OLED screen and the user can reset it using the menu button. Specifications: Dimensions: 88.9 mm x 127 mm x 127 mmWeight: 440g

€1,480.00*

gross: €1,761.20

Details

Free shipping

Anton Bauer 26V Gold Mount Plus Bracket (ARRI Alexa 35)

Anton Bauer 26V Gold Mount Plus Bracket (ARRI Alexa 35) SKU: 8375-0254 Power the ARRI Alexa 35 camera with Dionic 26V batteries to cut the cord, increase mobility and operate the 90-Watt ARRI Alexa 35 for ~2.8 hours with a Dionic 26V 240Wh battery. When handheld shooting means light weight is critical, shoot with the Dionic 26V 98Wh battery and operate for ~1.1 hours on a single battery. The Anton/Bauer Gold Mount Plus ARRI Alexa 35 Bracket replaces the B-Mount plate and connects directly to the back of the Alexa 35 camera, eliminating the need for extra cables. Installs directly on the back of the ARRI Alexa 35Communicates Battery Info to the camera via SMBusProvides Gold Mount Plus Interface

€600.00*

gross: €714.00

Free shipping

Wooden Camera 26V Gold Mount Plus (Alexa LF, 65, SXT)

Wooden Camera 26V Gold Mount Plus (Alexa LF, 65, SXT) SKU: 273000 Wooden Camera 26V Gold Mount Plus (Alexa LF, 65, SXT) attaches one 26V battery directly to the back of the ARRI Alexa LF, 65, SXT, and every Alexa down to the Classic EV to provide power through the rear battery contacts without cables. Internal circuit board prioritizes the 2pin Fischer DC Input, allowing 24V block batteries to be used first, leaving the on-board batteries fully charged. Hot swapping between battery sources is possible and OLED screen on side panel provides voltage data, battery capacity, and active source information. Two Power Taps are provided at a regulated 15V and current is monitored. Should the user exceed the current threshold, the plate will cut power to the P-Taps, leaving the camera operating normally. A warning message will appear on the OLED screen and the user can reset it using the menu button. Specifications: Dimensions: 88,9 mm x 127 mm x 127 mmWeight: 440g

€980.00*

gross: €1,166.20

Free shipping

Hawk-Woods RP-MX4 4-Channel 2A Reel-Power Li-Ion Charger

Hawk-Woods RP-MX4 Hawk-Woods's latest 4-channel Reel Power simultaneous charger offers a more sleek and compact look than our previous simultaneous model. Still keeping the simultaneous function so that you may charge all four batteries at once for ultimate charging times! This charger is fitted with 2A boards and is suited for our mini-RP battery range as well as our high performance and classic Reel Power batteries. LED's fitted for battery status, also fitted with soft leather carry handle. Weight: 1.86kg Size: 12 x 14 x 22 cm Current: 2.0Ah

€520.00*

gross: €618.80

Similar products

Free shipping

Hawk-Woods RP-M180 26V 180Wh Mini Reel-Power Battery Pack

Hawk-Woods RP-M180 The Hawk-Woods 180Wh mini Reel Power battery has been added to the mini RP range. Hawk-Woods range of mini 26v batteries have been designed for running high voltage cameras such as ARRI camera's and lighting equipment, with only a third of the weight of a standard size RP battery, this is the perfect solution if you want long run times, however would like to save on weight and space. The battery is that small, it will fit into the palm of your hand. Hawk-Woods mini Reel power range uses low resistance cell technology allowing high discharge and improved cycle life. The perfect match for high-voltage camera's when using the higher voltage battery, you demand less current from the battery, giving them an easier life and longer life span. When used with the RPM-HS1A these batteries can be used in a hot swap solution from a floor battery for longer run times. These batteries are not flight safe as they are outside of the 100Wh-160Wh bracket With built-in fuel gauge & Hawk-Woods build quality. The built-in Total Battery Protection system offers over discharge / voltage protection (If placed on unsuitable / incorrect charger), short circuit protection and thermal protection. Type: Reel-PowerWeight: 710g Size: 7 cm x 10.3 cm x 6.3 cm Current: 8.0Ah

€450.00*

gross: €535.50

Free shipping

Core SWX HLX-275MXG Helix Max 275 G-mt

Core SWX Helix Max 275 G-mt SKU: HLX-275MXG Core SWX Helix Max 275 G-mt is a Native Dual Voltage lithium ion battery with a robust load output - 275Wh Gold Mount. Helix275max, 14.4v/28.8v, 275wh 3-stud battery pack, LCD and w/ ptap and USB, 20A Max Load. Capacity: 275whOperational Voltage: Native Dual Voltage, DC 11v-16.8v/DC 22v-33.6vSize: 8,89 cm x 16 cm x 7 cmWeight: 1,40 kgLoad: continuous 20A @ 16.8v and 10A @ 33.6v

€720.00*

gross: €856.80

Free shipping

Hawk-Woods RP-M90 26V 90Wh Mini Reel-Power Battery Pack

Hawk-Woods RP-M90 The Hawk-Woods 90Wh mini Reel Power battery has been added to the mini RP range. Hawk-Woods range of mini 26v batteries have been designed for running high voltage cameras such as ARRI camera's and lighting equipment, with only a third of the weight of a standard size RP battery, this is the perfect solution if you want long run times, however would like to save on weight and space. The battery is that small, it will fit into the palm of your hand. Hawk-Woods mini Reel power range uses low resistance cell technology allowing high discharge and improved cycle life. The perfect match for high-voltage camera's when using the higher voltage battery, you demand less current from the battery, giving them an easier life and longer life span. When used with the RPM-HS1A these batteries can be used in a hot swap solution from a floor battery for longer run times. Being below 100Wh range, these batteries are flight safe for carry-on luggage and a maximum of two can be carried by each passenger. With built-in fuel gauge & Hawk-Woods build quality. The built-in Total Battery Protection system offers over discharge / voltage protection (If placed on unsuitable / incorrect charger), short circuit protection and thermal protection. Type: Reel-Power Weight: 500g Size: 7.1 cm x 9.9 cm x 6.6 cm Current: 6.0Ah

€340.00*

gross: €404.60

Anton Bauer Dionic 26V 240Wh Gold Mount Plus Battery

Anton Bauer Dionic 26V 240 SKU: 8675-0156 The DIONIC 26V battery system is a dedicated solution designed to power the high-performance production equipment needed to meet the demanding cinematography standards of today. A pure 26V battery with continuous 12A current to deliver over 300W of consistent power means you can run large LED panels for longer, producing hours of full intensity creative lighting or drive power-hungry cine cameras or high-speed cine cameras. When your production demands peak performance, DIONIC 26V batteries ensure that you have the power. Features 12A continuous draw99Wh or 250Wh Lithium-ion batteryGold Mount Plus provides the most secure fit for reliable device communicationGold Mount Plus protects lower voltage equipment.Displays runtime on built-in back-lit LCD display or through camera EVFOver discharge, overvoltage, short circuit and thermal protection Technical data Range: DionicMount type: Gold Mount PlusChemistry: Lithium-ionVoltage: 26 VCapacity: 250 WhMax current: 12 AmpsPower tap: NoUSB: NoWarranty: 2 YearWeight: 1.36 kgDimmensions: 131 mm x 99 mm x 87 mm

€800.00*

gross: €952.00

Anton Bauer Dionic 26V 98Wh Gold Mount Plus Battery

Anton Bauer Dionic 26V 98Wh

The DIONIC 26V Advantage

Gold Mount Plus

Technical data

The professional source for Filmmakers in Düsseldorf

We provide best equipment and advice in the field of professional video- and audio- technology