Skip to main content Skip to search Skip to main navigation

Info Our availability in the Christmas in-between period.
We will be closed from 23.12.2024. All orders placed during this period will be accepted, but shipped after 06.01.2025.
We wish you a Merry Christmas and a Happy New Year.

Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Hotline +49 211 930 730-33

BirdDog Eyes P400B 4K NDI PTZ Camera

BirdDog Eyes P400

BirdDog Eyes P400 features stunning 4K resolution NDI and allows chroma subsampling in your choice of 4:2:0 or 4:2:2. It teams up BirdDog’s custom NDI® silicon chip, a 4K Sony CMOS Backlit sensor, and a true Sony Image Module. Eyes P400 includes professional-level colour tools including Colour Matrix control, Black level, Gamma including 512 pre-set gamma positions.

P400 debuts the world’s first 4K NDI with chroma subsampling at 4:2:2 which can be decoded natively in hardware by BirdDog’s 4K Family of NDI Encoders and Decoders. If decoding with a 4:2:0 receiver the stream will automatically serve 4:2:0 and this is what will be decoded. Think of it as an automatic and virtual handshake.

Full NDI® is a variable bit rate codec. In normal circumstances BirdDog recommends allowing around 140Mbps in HD, or 6 streams per 1GbE cable with some headroom. In 4K it is recommended to allow around 300Mbps or 3 streams with some headroom to allow for any unforeseen spikes.

With BirdDog’s tools you can select the bit rate to suit your bandwidth and requirements. In both HD you can slide between 80-180Mbps and in 4K you can select the data rate to be anywhere between 60 and 360Mbps.

BirdDog Cam Control

BirdDog Cam Control allows full access to the entire colour matrix, black levels, and even the gamma to be able to shade your P400 professionally. Right click to view camera full screen on a secondary monitor to really dial in the look you want and then copy the settings to colour match cameras in seconds.

Incredible low light performance

In low light conditions the camera automatically switches from day to night mode, removing the IR-cut filter to boost sensitivity for clear pictures in near-darkness.

Triple output. NDI, 6G-SDI and HDMI

With NDI®, 6G-SDI, and HDMI simultaneous outputs, the P400 is ready to go live with your full NDI® workflow today or if you are still in an old school SDI workflow you can use as an SDI camera and ease your way into the world of NDI®. lets you eliminate the need to add frame buffers.

Superfine Robotics. Precise control at your fingers

P400’s robotics are precise and sensitive. Wind down the panning and tilting speeds to create super professional shots that are dramatic, or crank up the speeds for high action sports to allow you to follow the movements.

20x Optical Zoom

The 20x optical zoom offers a bright F2.0 aperture with a super smooth and fast zoom. Transition from wide to tele and recall pre-set positions quickly and with super fine precision. The incredible optical zoom function makes P400 perfect for sports such as football, baseball, hockey, ski fields, basketball, soccer, and more.

Tally light

NDI has tally information built into the metadata so when P400 is connected to an NDI enabled switcher the tally light on the front of the unit to ensure your on-air talent will always know which camera is live.

PoE or DC Power options

P400 can be powered by Power over Ethernet (PoE+) for single cable operation that can carry Video, Audio, Power, Tally, and Intercom or you can choose to use the included power adapter.

PTZ Keyboard

Combine P400 with the BirdDog PTZ Keyboard and you have total control of all functions remotely. PTZ Keyboard is a full featured PTZ Keyboard that can control up to 255 PTZ cameras on a single network so can scale to even the most complex installations. PTZ Keyboard can control P400 over NDI® or by RS422 / RS232 when using in SDI mode.

Details of the manufacturer

  • BirdDog Australia Pty Ltd
  • 1 Sackville Street
  • 3066 Collingwood – VIC, Australia

https://birddog.tv/contact

Details of the person responsible for putting the product on the European market

  • New Media AV Bauer und Trummer GmbH
  • Johannes Bauer
  • Pirnaer Straße 20
  • 90411 Nürnberg, Germany

+49 911 5399-60

team@nmav.de 

Related links of the manufacturer

Accessory Items

Free shipping
LIBEC LX-ePed Electric pedestal with Floor Spreader
LIBEC LX-ePed LIBEC LX-ePed is an electric pedestal with Floor Spreader for PTZ cameras As demand for PTZ cameras is dramatically increasing in the field of broadcast and production, the need for support equipment suitable for PTZ cameras continues to soar. This patent pending LX-ePed was specially developed in order to respond to such demands. This world’s first electric pedestal for PTZ cameras can be remotely operated with a wired controller. With the maximum payload of 10kg, the LX-ePed is able to support most PTZ cameras. There are two types to choose from: the simple Floor Spreader type, and the convenient Dolly type. Features Electric Elevation Pedestal with Remote Control Continuous Speed Adjustment Highly Reliable Wire Connection System V-mount Battery Powered (optional) Compatible with Flat-Base Equipment with a 1/4" or a 3/8" Screw Hole Compatible with Video Heads Compact Design High-Angle Shots User Friendly Accessory Port Safety Design Built-in Bubble Level Technical data Payload: 10kgElevation: 400mm Raising/Lowering speed:  Approx. 14 to 40 secs. / movement Continuous operating time:  3 minutes  LAN cable for controller: 30mPower cable: 3mPower: AC100V~240V Temperature range: -10°C to 40°C below RH90% Battery-powered: Optional Camera attachment: 1/4" and 3/8" screws Head attachment: 100mm / 75mm bowl Accessory attachment: 1/4" and 3/8" screw holes x 2 Bubble level: Available Weight: 11.2kgHeight: 95.5 to 247cmSection: 2-Stage 

€3,350.00*
gross: €3,986.50
Free shipping
RigWheels PTZ-OI-PC Overhead Vibration Isolator with Pipe Clamps
RigWheels PTZ Camera Overhead Vibration Isolator with Pipe Clamps SKU: PTZ-OI-PC RigWheels PTZ Camera Overhead Vibration Isolator with Pipe Clamps opinion is intended to be attached to overhead pipe/tube between 1-1/8″ and 2″ in diameter. These clamps can also clamp onto rectangular tubing (1.5 x 2″ rectangular tubing for example) For a PTZ or fixed camera installation, this system provides excellent isolation because ALL of the load can be placed directly on the elastic vibration isolating components. For vehicle mounting the cables in the system provide structure so the mount doesn’t bounce around erratically. For installations, the cables used are present for two purposes, 1) security in the event that the elastic tubes fail over time. 2) To prevent “pancaking”. When larger cameras pan left/right quickly, there needs to be some structure in the mount so the inertia doesn’t create a lateral/twisting swinging effect. Every installation is different so are several options for how you can mount a PTZ camera with this solution however, there are two primary methods. From above - Directly to a ceiling or to a pipe/tube/truss using RigWheels Universal Pipe Clamps. ATTENTION: Pictured tube not included

€730.00*
gross: €868.70
Free shipping
RigWheels PTZ-WM-PC Wall Mount Vibration Isolator with Pipe Clamps
RigWheels PTZ Wall Mount Vibration Isolator with Pipe Clamps SKU: PTZ-WM-PC RigWheels PTZ Wall Mount Vibration Isolator with Pipe Clamps is intended to be attached to vertical or angled pipe/tube between 1-1/8″ and 2″ in diameter. These clamps can also clamp onto rectangular tubing (1.5 x 2″ rectangular tubing for example). Both overhead and wall mounted positions can also be used with our high power RigMount Magnets for applications such as mounting to a overhead I-Beam or warehouse speed-racks. ATTENTION! pictured tube not included

€975.00*
gross: €1,160.25
Free shipping
LIBEC LX-ePed Studio Electric pedestal with Dolly
LIBEC LX-ePed Studio LIBEC LX-ePed Studio is an electric pedestal with Dolly As demand for PTZ cameras is dramatically increasing in the field of broadcast and production, the need for support equipment suitable for PTZ cameras continues to soar. This patent pending LX-ePed was specially developed in order to respond to such demands. This world’s first electric pedestal for PTZ cameras can be remotely operated with a wired controller. With the maximum payload of 10kg/22.0lb, the LX-ePed is able to support most PTZ cameras. There are two types to choose from: the simple Floor Spreader type, and the convenient Dolly type. The remote controlled LX-ePed adds the elevating element to the PTZ camera's pan, tilt and zoom features. This will provide more “Angles of View” , and make setup adjustments easier in studios.The speed of the Upper Column is adjustable by tilting the rocker of the Controller. The slow mode enables fine-tune settings Features Electric Elevation Pedestal with Remote Control Continuous Speed Adjustment Highly Reliable Wire Connection System V-mount Battery Powered (optional) Compatible with Flat-Base Equipment with a 1/4" or a 3/8" Screw Hole Compatible with Video Heads Compact Design High-Angle Shots User Friendly Accessory Port Safety Design Built-in Bubble Level Technical data Payload: 10kgElevation: 400mm Raising/Lowering speed: Approx. 14 to 40 secs. / movement Continuous operating time: 3 minutes  LAN cable for controller: 30m Power cable: 3m Power: AC100V~240V Temperature range: -10°C to 40°C below RH90% Battery-powered: Optional Camera attachment: 1/4" and 3/8" screws Head attachment: 100mm / 75mm bowl Accessory attachment: 1/4" and 3/8" screw holes x 2 Bubble level: Available 

€3,450.00*
gross: €4,105.50
RigWheels PTZ-OI PTZ Camera Overhead Vibration Isolator
RigWheels PTZ Camera Overhead Vibration Isolator SKU: PTZ-OI The RigWheels PTZ camera vibration isolator is the perfect solution to improve image quality for fixed installations in theaters, concert venues, houses of worship, classrooms, factories with machine vibration and other similar locations. This innovative mount is designed to reduce unwanted vibrations that can negatively impact your camera’s performance, allowing you to capture clear and stable images. RigWheels PTZ camera vibration isolator is capable of reducing vibrations from various sources, including loudspeakers, machinery, foot traffic and other problematic sources. This results in exceptionally improved image stability, ensuring that your footage remains clear, even in challenging environments. RigWheels PTZ Camera Overhead Vibration Isolator PTZ-OI opinion is intended to be bolted/screwed directly to ceiling or overhead surface using standard hardware.

€649.00*
gross: €772.31
Free shipping
RigWheels PTZ-WM Wall Mount Vibration Isolator
RigWheels PTZ Camera Wall Mount Vibration Isolator SKU: PTZ-WM RigWheels PTZ Wall Mount Vibration Isolator is intended to be bolted/screwed directly to wall or vertical surface using standard hardware. The PTZ camera vibration isolator is made in the USA and constructed with high-quality materials, including machined 6061 aluminum mounting plates and high quality elastic dampening elements. It is designed to be easy to install, allowing you to quickly set up and start using your camera without any additional hassle. This design can also be easily adapted to provide vibration isolation for video projectors. With its versatile design, the PTZ camera vibration isolator can accommodate a wide range of cameras, making it a perfect addition to your existing equipment. The elastic isolation components are cut-to-length corresponding to the weight of the camera being attached to the mount to provide the best isolation possible.  Whether you’re recording a concert, capturing footage of a religious service, or conducting any other kind of fixed installation video recording with PTZ camera or remote heads, this mount is a must-have for capturing high-quality footage that’s free from distracting vibrations.

€899.00*
gross: €1,069.81

Similar products

Free shipping
Tip
BirdDog Eyes P400 Bundle
BirdDog Eyes P400 Bundle BirdDog P400 Bundle 3x P400 White + 1x PTZ Keyboard P400PROMO-WWW3x P400 Black + 1x PTZ Keyboard P400PROMO-BBB2x P400 White + 1x P400 Black + 1x PTZ Keyboard P400PROMO-WWB1x P400 White + 2x P400 Black + 1x PTZ Keyboard P400PROMO-WBB

€10,900.00*
gross: €12,971.00
Tip
RGBlink VUE NDI PTZ Camera 30x Optical Zoom
RGBlink VUE NDI PTZ Camera 30x Optical Zoom SKU: RGB30X-PNDI-TLY The RGBlink VUE NDI PTZ Camera 30x Optical Zoom is a professional broadcast PTZ camera in a sleek black design with a tally LED light on top. With its fast, silent rotation and zoom function, it is ideal for smaller productions, live events or in the education sector. Video output is via HDMI, 3G-SDI, USB 2.0 or IP streaming via network at up to 1080p60. Even in low-light conditions, it delivers top-notch image quality with rich colors thanks to dynamic noise reduction. The lens' high zoom factor and intelligent, fast autofocus allow for sharp distance shots. The camera has one HDMI, 3G-SDI, USB and network port each, simultaneously outputting video signals at a maximum of 1080p60. Connected to a PC via USB, the camera is recognized as a UVC webcam without driver installation. It can be immediately integrated into OBS-Studio for streaming or into Zoom, MS-Teams or similar for video conferencing. The video signal can be output at 720p or 1080p with the frames common in broadcast. Optionally, date, time and the individual camera name can be displayed in the image. Audio signals from a microphone or line-in device are embedded in the HDMI, SDI or network stream via the 3.5 mm stereo jack. Power is supplied to the camera via the included AC adapter, or alternatively via LAN thanks to the PoE function if Power over Ethernet is supported by the router. Features High image quality with dynamic noise reduction in low light conditionsHigh-speed optical zoomNDI|HX2 license: control, video over IP and embedded audio signal Full HD resolution with up to 60 frames/sec simultaneously on all video outputsEmbedded audio in HDMI, SDI and network streamH.264/H.265 dual streaming with all relevant network protocolsTally LED light on topOSD menu with manual IP entry/DHCP activation via remote controlAdministration via web browserPTZ camera control via VISCA or Pelco protocolsPower supply via PoEPower saving sleep function with parking position of lens vertically downwards1/4" tripod thread on the bottom sideSuitable for wall or ceiling mounting (accessories not included) Technical data Interface  Output 3G SDI 1xBNCHDMI 1xHDMI-AUSB 1xUSB-ALAN 1xRJ45Audio IN 1x3.5mm Stereo JackControl RS232 IN/OUT 2xDIN8RS485 1x4pin TerminalPower 1xDC12V Jack Performance  Video format 1080P60 1080P50 1080I60 1080I50 1080P30 1080P25 720P60 720P50 1080P59.94 1080I59.94 1080P29.97 720P59.94 Camera 30XOptical Zoom f=5.2~148.4mm View Angle 2.14°~ 58.1° AV F1.3 ~ F4.8 Digital Zoom 10XMinimum Illumination 0.5Lux (F1.8, AGC ON)DNR 2D & 3D DNRWhite Balance Auto/Manual/One Push/3000K to 7000K(selectable)Focus Auto/ManualAperture/Electronic Shutter Auto/ManualBLC ON/OFFWDR OFF/Dynamic Level AdjustmentVideo Adjustment Brightness/Color/Saturation/Contrast/Sharpness/B/W mode/Gamma curveSNR >55dBEffective Pixels 2.07m,16:9 Pan-and-Tilt Parameter Pan/Tilt Movement -170°~+170°/'-30°~+90°Pan/Tilt Control Speed 0.1~60°/S;0.1~30°/SPreset Speed/Quantity Pan:60°/S, Tilt:30°/S; Up to 255 preset positions (10 remote control)360° TALLY full 360° view of TALLY Audio Compression Format AAC | MP3 | G.711AVideo Compression Format H.264 | H.265 | Dual Streaming OutputOutput Resolutions 1080p60/59.94/50/30/29.97/25 | 1080i60/59.94/50 | 720p60/59.94/50Control Protocol VISCA | Pelco-D | Pelco-PBaud Rate(bps) 115200 | 9600 | 4800 | 2400bpsNetwork Protocol RTSP | RTMP | ONVIF | GB/T28181 | VISCASupported Standards SDI SMPTE 425M (Level A & B) | SMPTE 424M | SMPTE 292M | SMPTE 259M-C | DVB-ASI Power  Input Voltage DC12V/1.5AMax Power 12W Environment Temperature -10℃~50℃Humidity 20%~80% Physical Weight Net 1.7kgDimension Net 180mm(front)×188mm(side)×198mm(height) In the box 1 x RGBlink VUE NDI PTZ Camera 30x Optical Zoom1 x IR remote control (2 x AAA batteries not included)1 x 230V power supply1 x RS-232 serial cable1 x user manual

€990.00*
gross: €1,178.10
Pay with:
We ship with: