CamDo Swivel Mount Kit for Outdoor / Solar Enclosures

CamDo DryX The CamDo DryX enclosure is the same enclosure that ships with our SolarX Enclosure Power System includes a battery pack (44 Wh Battery) but does not iclude solar panel. Our outdoor enclosures are fitted with a sturdy aluminum mounting bracket that contains multiple 1/4"-20 threaded holes on the top, back, and bottom for use with standard tripod screws. It also has 2 slots at the back for using straps to attach the enclosure to a pole. CamDo offers a sturdy swivel mount for easy mounting to a pole or flat surface Inside the enclosure contains an aluminum bracket designed to tightly fit the GoPro HERO3, HERO4, HERO5 Black, and HERO5 Session cameras with a CamDo time lapse camera controller such as BlinkX. The interior has space for extra batteries or other accessories. One accessory that can be used with BlinkX or Blink is our X-Band Motion Sensor that can detect motion through the walls of the enclosure without requiring extra opening for the signal to pass through. The enclosure is fitted with a standard 67mm filter adapter and a neutral density UV optical glass “digital filter” is included. You can replace the filter with your filter of choice. These enclosures are not submersible. The degree of water resistance depends on the mounting method and options selected. They are suitable for general outdoor use. Enclosure Specifications Material: NK-7 Polypropylene ResinExterior Dimensions: 231 mm x 173 mm x 97 mmInterior Dimensions: 188 mm x 124 mm x 79 mmPadlock holes: 2 at top to secure the contents.Mounts: Aluminum bracket with tripod holes (¼"-20) on the top (2x 1.75"spacing), back (3x 2.75"spacing), and bottom (1x centered), as well as two 1.1" slots (2.5"spacing) at back for strapping to a post.

CamDo SolarX CamDo outdoor enclosure is fitted with a sturdy aluminum mounting bracket that contains multiple1/4"-20 threaded holes on the top, back, and bottom for use with standard tripod screws. It also has 2 slots at the back for using straps to attach the enclosure to a pole. The CamDo solar panel is removable and attached to the top of the enclosure using a dual ball socket arm so it can be positioned for optimum sun exposure. The solar panel charges the included Lithium Polymer battery which outputs 5 volts to power the camera or other accessories in a weatherproof enclosure. The enclosures are designed to be crushproof and dust tight. Inside the weather resistant enclosure contains an aluminum bracket designed to hold the GoPro HERO5 -HERO8 / Sony DSC-RX0 and CamDo UpBlink Time Lapse Controller. It is possible to access the SD card, or USB connector without removing the camera. If the camera needs to be replaced, the fit is extraordinarily tight, guaranteeing that the camera will be in the exact same position as before so there is no disruption to your time lapse footage positioning. The interior has space for extra batteries or other accessories such as our Motion Detector. The enclosure is fitted with a standard 67mm filter adapter and a neutral density UV optical glass “digital filter” is included. You can replace the filter with your filter of choice. Solar Panel Specifications Dimensions: 220 x 255 x 5mm Weight: 360g Peak Current: 1500mAPeak Power: 9.0WCell Type: MonocrystallineOpen Circuit Voltage: 7.0VPeak Voltage: 6.0VCell Efficiency: 19% V50 Battery Specifications Capacity: 12,000 mAH, 44 WhOutput: 5V 2A and 5 V, 1A (two outputs)Input: 5-6 V, 2000 mAMaximum Output Power: 15 Watts (total)Weight: 312 gDimensions: 104 x 107 x 19 mmAlways On Mode: does not automatically shutdown when inactive.Protection: Overcharge, Over discharge, Over Current, Short CircuitLED indicators: light sequentially when charging to indicate the current capacity DryX Enclosure Specifications Material: NK-7 Polypropylene ResinExterior Dimensions: 231 x 173 x 97 mmInterior Dimensions: 188 x 124 x 79 mmPadlock holes: 2 at top to secure the contents.Mounts: Aluminum bracket with tripod holes (1/4"-20) on the top, back, and bottom, as well as two 1.1" slots at back for strapping to a post.