Core SWX GoPro Regulator Cable 6 DV-GP3-PT6

Core SWX GoPRO Battery Eliminator with Wall Adapter SKU: DV-GP3-USBPS The Core SWX DV-GP3-USBPS is a power extension cable allowing you to power the GoPRO Hero 3/3+ and includes a USB AC Wall Adapter. While a USB cable is suitable for many applications, the Switronix DV-GP3 adapter locks into the battery receptacle on the back of the camera, so you no longer need to rely on the USB connection on the side of the camera which can come out easily. Providing a reliable and secure power connection is essential when using the camera, since the GoPro's are often put in precarious, high impact situations. The adapter also allows the use of the front submersible housing of the GoPro and the skeleton back. Covering the back skeleton housing openings with some gaffer tape, would prove to offer a splash/water resistant housing for many situations. The cable is offered in a 25,4 cm (10') length and is a perfect solution for when you need to run the GoPro camera for extended run times from and AC wall socket. Includes AC to USB wall adapter Input 5v USBOutput for Camera 5v

Core SWX GoPro Regulator Cable Cig SKU: DV-GP3-CIG6 The Core SWX DV-GP3-CIG6 allows you to power your GoPro Hero 3/3+ camera via a cigarette lighter whether in a vehicle or otherwise. The cable will convert the available 12v power to the proper operable voltage for the GoPro camera. While other options may be available, the Switronix DV-GP3 adapter locks into the battery receptacle on the back of the camera, so you no longer need to rely on the USB connection on the side of the camera which can come out easily. Providing a reliable and secure power connection is essential when using the camera, since the GoPro's are often put in precarious, high impact situations. The adapter also allows the use of the front submersible housing of the GoPro and the skeleton back.  Covering the back skeleton housing openings with some gaffer tape, would prove to offer a splash/water resistant housing for many situations. The cable is offered in a 15.24 cm (6") length which should provide plenty of length when mounted in or around a car, and most other situations.  Input DC 12v via male cigarette plugOutput for Camera 5vLength approx. 15.24 cm (6")

Core SWX DV-GP3-XT60 GoPRO Regulator Cable Y The Core SWX DV-GP3-XT60 allows you to power your GoPro Hero 3/3+ camera via an available XT60 connector from your Quad, Hex or Octocopter(i.e DJI Phantom battery pack with XT60 connector). The cable will convert the available power(3S-6S battery pack) to the proper operable voltage for the GoPro camera. The Y adapter cable allows you to tap of the copter power, and power both the copter as well as GoPro from the same power source. The GoPro draws minimal power, and will reduce flight times by no more then 30seconds per hour of available copter power. While other options maybe available, the Switronix DV-GP3 adapter locks into the battery receptacle on the back of the camera, so you no longer need to rely on the USB connection on the side of the camera which can come out easily. Providing a reliable and secure power connection is essential when using the camera, since the GoPro's are often put in precarious, high impact situations. Whether wind turbulence, motor vibration, or impact, you can insure the camera will be powered. The adapter also allows the use of the front submersible housing of the GoPro and the skeleton back. Covering the back skeleton housing openings with some gaffer tape, would prove to offer a splash/water resistant housing for many situations. The cable is offered in a 30.48 cm length which should provide plenty of length when mounted below the copter or via brushless gimbal. For the DJI Phantom, the gauge of the cable is thin enough coming from the DV-GP3-XT60 to allow you to close the battery door and not pinch the cable. Input DC 8-24v via XT60 connector from a copter LIPO battery packOutput for Camera 5vLength approx. 30.48 cm

Core SWX DV-GP3-PT3 GoPro Regulator Cable 3 36' Regulator Cable for GoPRO Hero 3/3+ with Powertap The Core SWX DV-GP3-PT3 allows you to power your GoPro Hero 3/3+ camera via a powertap connector, a standard in the professional video industry. The cable will convert the available 8-24vdc power to the proper operable voltage for the GoPro camera. While other options may be available, the Switronix DV-GP3 adapter locks into the battery receptacle on the back of the camera, so you no longer need to rely on the USB connection on the side of the camera which can come out easily. Providing a reliable and secure power connection is essential when using the camera, since the GoPro's are often put in precarious, high impact situations. The adapter also allows the use of the front submersible housing of the GoPro and the skeleton back. Covering the back skeleton housing openings with some gaffer tape, would prove to offer a splash/water resistant housing for many situations. Input DC 8-24v via male powertap plugOutput for Camera 5vLength approx. 91.44 cm