Core SWX HLX-TS-SFF Helix HotSwap/SharkFin V-Mount Battery Plate

Wooden Camera 26V Sharkfin Gold Mount Plus SKU: 273100 Anton Bauer 26V Sharkfin Gold Mount Plus (Alexa LF, 65, SXT) attaches two 26V batteries in a Sharkfin configuration directly to the back of the ARRI Alexa LF, 65, SXT, and every Alexa down to the Classic EV to provide power through the rear battery contacts without cables. Internal circuit board prioritizes the 2pin Fischer DC Input, allowing 24V block batteries to be used first, leaving the on-board batteries fully charged. Hot swapping between battery sources is possible and OLED screen on side panel provides voltage data, battery capacity, and active source information. Two Power Taps are provided at a regulated 15V and current is monitored. Should the user exceed the current threshold, the plate will cut power to the P-Taps, leaving the camera operating normally. A warning message will appear on the OLED screen and the user can reset it using the menu button. Specifications: Dimensions: 88.9 mm x 127 mm x 127 mmWeight: 440g

Core SWX GP-TS-SFF The Core SWX GP-TS-SFF is a short form factor Hotswap Shark-fin adapter that mounts directly to the existing v-type plate on the camera. It allows for continuous battery operation, and for additional accessories, it has 4 powertaps. Since the batteries aren’t ‘stacked’ on one another, you can easily remove the depleted battery while leaving the other battery connected so that there is no down time. Specification: Input: DC 11-17vOutput for Camera: DC 11-17v, Unregulated ParalleledOutput for 4x P-Tap: DC 11-17v, Unregulated, 7.2A maxSize: 11,68 cm x 8,89 cm x 11,94 cmWeight: 0,54 kg

Wooden Camera Arri Alexa LF 24V Sharkfin Battery Bracket SKU: 262900 ARRI Alexa LF 24V Sharkfin Battery Bracket (V-Mount) allows for two standard voltage V-Mount batteries to power the Alexa LF, which requires 24V. Key features include hot swapping capability between batteries and the DC input, 4x D-Tap connectors that remain powered with at least one battery installed, percentage information transmitted to the camera when smart batteries are used, knobs for tool-less installation with a hidden allen wrench for additional tightening, and a protective cover plate for when battery bracket is not in use. Hot Swapping and Normal Operation Since the Alexa LF requires high current for normal operation, two batteries capable of 10A sustained draw should be installed at all times. At camera idle, when no lens motors are moving, batteries can be swapped one at a time while the camera and accessories remain powered. It is also possible to hot swap between block battery and onboard batteries. 4x D-Tap Accessory Power 2x D-Taps are available on each power plate in various positions. All D-Taps remain powered even when a single battery is installed. Note that D-Taps will not function when only powering the camera from a block battery while no onboard batteries are installed. Percentage Display in Camera The Sharkfin module will read SMBUS and reverse SMBUS batteries, combine the data, and provide a summarized information stream to the camera. This data is displayed in the UI on the side of the camera body, LCD, EVF, etc. Tool-less Installation and Protective Cover The system has four M3 thumbscrews and two locating points which attach directly to the back of the camera. The allen wrench can be used to complete the installation and stored neatly on the plate for future use. The included cover plate is great for protecting the pogo pins during transit. Please note that voltage will be present on the pogo pins when a battery is installed so do not attach a battery if the bracket is not installed on the camera. Weight: 907 gDimensions: 140 mm x 146 mm x 95.3 mm