Core SWX NANO Micro 98Wh Lithium-Ion Battery (V-Mount)

Core SWX GP-X4S The Core SWX X4 charger is a compact charger with an upright design and a lightweight, plastic housing. It offers a simultaneous 2.6A charging as well a single bay per side fast charge. When only needing to charge one battery pack on each side, the rapid charge will charge the pack at 2.6A (one 98wh pack in under 2.5hrs). When two packs are placed on either side, the charge will charge the lesser charged pack up to the same level as the other, then charge both at 2.6A current combined. Trickle charge maintenance program ensures the batteries are always at maximum capacity. The charger is compact enough to fit into a camera bag yet versatile, addressing all batteries simultaneously. This charger will charge four "micro" sized packs( NANO Micro V-Mt / NANO Micro 3-Stud) at a time, but can only charge two large size packs(NEO, Hypercore) because of a mechanical incompatibility. Features Micro Quad Batter Charger4hrs charge for four 98wh packsUpright design Includes AC CableCompact charge that can charge four micro sized batteries silmultaneouslyRapid charge will charge the pack at 2.6A (one 98wh pack in under 2.5hrs)Trickle charge maintenance program2 versions available: V-mount or 3-Stud

Core SWX X2 Mini Charger V-Mount SKU: GPM-X2S The Core SWX X2 Mini is a super compact charger with an upright design and a lightweight, plastic housing. It offers a simultaneous 1.5A charging as well a “Fleet Rapid Charge” bay. When only needing to charge one battery pack, place it on the rapid charge channel for a 3A charge, and take advantage of the Fleet series charge time (one 98wh pack in under 2.5hrs). Trickle charge maintenance program ensures the batteries are always at maximum capacity. Technical data Input: 100V-240VAC 50/60Hz Charge current: One battery 3A, 2 batteries simultaneous 1.5A Size: 11,43 cm x 13,97 cm x 7,62 cm Weight: 50 g

Core SWX CXV-TS-VRAP The Core SWX CXV-TS-VRAP connects to the v-mount of the DSMC3 Raptor to allow you to attach two V-mount battery packs(full size, mini or micro) to the rear of the camera. Different from some other plates, the all-aluminum build of this plate makes it feel like part of the camera. The build quality is next level and we have added some new features on this plate we’ve never done before. Since the Raptor outputs are found on the rear of the camera, this hotswap allows you to slide out the right side mount plate to the proper depth so as to not block the inputs and outputs of the Raptor camera. The set screw then locks the positioning in place allowing you to accommodate any size battery packs. A storage slot with magnetic hold keeps the allen key in place to reposition at any time. Choose between discharging both battery packs at the same time equally or one and then the other. To draw from both batteries equally, switch the button to the “I I” setting. When the switch is in the “I+I” setting, it will draw power from the camera operator side battery first, and then move to the other. Either way you choose, you can still hot swap batteries to keep continuous power going to your camera and accessories. All mode changes should be done prior to camera startup. The switch is deactivated once power is being drawn from the plate. Features RED V-Raptor Sharkfin V-mtAllows you to mount two packs and hotswap on the RED Raptor for extended runtimesAllows you to use other size batteries instead of just micro sized packsInput: DC 11-17vOutput for Camera: DC 11-17v, Unregulated ParalleledOutput for 2x P-Tap: DC 11-17v, Unregulated, 7.2A max