Decimator Design DMON-12S 1 to 12 Channel MultiViewer

Decimator Design DMON-6S Decimator Design DMON-6S is 1 to 6 Channel MultiViewer with SDI and HDMI outputs for 3G/HD/SD and Custom Layouts. The DMON-6S is a truly portable converter, that incorporates our new easy to use LCD and button control system. This gives you easy access to most of the amazing features without using complicated LED/button control, dip switches or having to carry around a computer to change a simple setting. Features Support both 3G level A and B on the input and output. Allowing conversion between 3G level A and B.Low cost miniature (3G/HD/SD)-SDI 1 to 6 channel Multi-Viewer or 6 to 1 input multiplexer6 x (3G/HD/SD)-SDI active loop copies of each inputCustom Layouts with various standard layouts16 Character UMD overlay per window with individual enables, custom positioning and size16 Channel Audio Metering overlay per window with individual enables, custom positioning and sizeSafe Action and Safe Title overlay per window with individual enables and adjustmentCentre Cross overlay per window with individual enableAudio ID overlayTallies can be applied to either Tally Boxes (Default), Outside Safe Action Area or BorderTally boxes allows for up to 4 Tallies per window (Green, Red, Blue and Yellow)Load and restore Custom LayoutsFast switching between inputs using Full-Screen scalingSelectable output format in both Full-Screen and Multi-Viewer modeLow latency buffering for each input allowing non-synchronous inputsLinked (3G/HD/SD)-SDI and HDMI outputs6 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneouslyVariable aspect ratios per windowPass-Through mode allowing any of the 6 inputs to be selected and routed to both the (3G/HD/SD)-SDI and HDMI outputs This unit also includes 32 GPI on 37-pin D-SUB connector for Tallies and Remote SwitchingRS422/485 on 37-pin D-SUB connector for Dynamic UMD and Tallies via TSL protocolUSB port for control and firmware updatesHeavy duty metal boxMetal Thread Locking DC Power SocketPower Supply, HDMI Cable and USB Cable

Decimator Design DMON-4S Decimator Design DMON-4S is 4 x (3G/HD/SD)-SDI to HDMI Converters with 1 to 4 MultiViewer, Custom Layouts and 8 Channel Audio Meters. The DMON-4S is a truly portable converter, that incorporates our new easy to use LCD and button control system. Multi-View mode now includes 8 Channel Audio Metering overlay per window with individual enables, custom positioning and sizeSupport for both 3G level A and B on the inputs.Horizontal and/or Vertical image flipping per window Includes 4 independent mini HDMI outputs that can each output any of the four (3G/HD/SD)-SDI inputs or a Multi-View of all them. For example you could use the unit to have: 4 independent SDI to HDMI converters 3 independent SDI to HDMI converters with a quad-split output 2 independent SDI to 2 x HDMI converters with loop throughA single SDI or Multi-View to 4 x HDMI outputs Inputs 2 and 4 can be individually changed to output active loop copies of inputs 1 and 2 respectively. Multi-View mode offers Custom Layouts with various standard layoutsLoad and restore Custom LayoutsFast switching between inputs using Full-Screen scalingSelection of audio from any input16 Character UMD overlay per window with individual enables, custom positioning and sizeLow latency buffering for each input allowing non-synchronous inputsEach window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneouslyVariable aspect ratios per window This unit also includes USB port for control and firmware updatesHeavy duty metal boxMetal Thread Locking DC Power SocketPower Supply, HDMI Cable and USB Cable

Decimator Design DMON-16S Decimator Design DMON-16S is 1 to 16 Channel Multi-Viewer with SDI and HDMI Outputs for 3G/HD/SD and Custom Layouts, UMDs, Audio Meters, Graticules and Tallie. The DMON-16S is a truly portable converter, that incorporates our new easy to use LCD and button control system. This gives you easy access to most of the amazing features without using complicated LED/button control, dip switches or having to carry around a computer to change a simple setting. Features Support for both 3G level A and B on the input and output. Allowing conversion between 3G level A and B.Low cost miniature (3G/HD/SD)-SDI 1 to 16 channel Multi-Viewer or 16 to 1 input multiplexerCustom Layouts with various standard layouts16 Character UMD overlay per window with individual enables, custom positioning and size8 Channel Audio Metering overlay per window with individual enables, custom positioning and sizeSafe Action and Safe Title overlay per window with individual enables and adjustmentCentre Cross overlay per window with individual enableAudio ID overlayTallies can be applied to either Tally Boxes (Default), Outside Safe Action Area or BorderTally boxes allows for up to 4 Tallies per window (Green, Red, Blue and Yellow)Load and restore Custom LayoutsFast switching between inputs using Full-Screen scalingSelectable output format in both Full-Screen and Multi-Viewer modeLow latency buffering for each input allowing non-synchronous inputsLinked (3G/HD/SD)-SDI and HDMI outputs16 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneouslyVariable aspect ratios per windowPass-Through mode allowing any of the 16 inputs to be selected and routed to both the (3G/HD/SD)-SDI and HDMI outputs This unit also includes 32 GPI on 37-pin D-SUB connector for Tallies and Remote SwitchingRS422/485 on 37-pin D-SUB connector for Dynamic UMD and Tallies via TSL protocolUSB port for control and firmware updatesHeavy duty metal boxMetal Thread Locking DC Power SocketPower Supply, HDMI Cable and USB Cable

Decimator Design DMON-QUAD 3G/HD/SD-SDI Quad Split Multi-Viewer 4 x (3G/HD/SD)-SDI to HDMI Converters with 1 to 4 MultiViewer, Custom Layouts and 8 Channel Audio Meters Supports 3G level A and B on inputs and output, allowing conversion between 3G level A and B Low cost (3G/HD/SD)-SDI 1 to 4 Multi-Viewer or 4 to 1 input multiplexer Custom Layouts with various standard layouts 16 Character UMD overlay per window with individual enables, custom positioning and size 8 Channel Audio Metering overlay per window with individual enables, custom positioning and size Horizontal and/or Vertical image flipping per window Audio ID overlay Tallies can be applied to either Tally Boxes (Default) or Border Tally boxes allows for up to 4 Tallies per window Fast switching between inputs using Full-Screen scaling Selectable output format in both Full-Screen Multi-Viewer modr Low latency buffering for each input allowing non-synchronous inputs Linked (3G/HD/SD)-SDI and HDMI outputs 4 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in tota) Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously Variable aspect ratios per window In Pass-Through mode the selected input is passed through to both the (3G/HD/SD)-SDI and HDMI outputs The DMON-QUAD is a truly portable converter, that incorporates our easy to use LCD and button control system. This gives you easy access to most of the amazing features without using complicated LED/button contro, dip switches or having to carry around a computer to change a simple setting DMON-QUAD also includes GPI on RJ-45 connector for Tallies and Remote Switching RS422/485 on RJ-45 connector for Dynamic UMD and Tallies USB port for control and firmware updates Robust Aluminium box Metal Thread Locking DC Power Socket Power Supply, HDMI Cable and USB Cable