edelkrone SliderPLUS v5 Compact

edelkrone HeadPLUS edelkrone HeadPLUS is a new Motorized Pan & Tilt Head with optional add-ons Target Module, Vision Module and Focus/Zoom Module. Wireless & seamless compatibility within the entire edelkrone ecosystem. Fast Setup & Simple Programming HeadPLUS is the simplest camera head to use and can be programmed by demonstrating the desired movement, making it the fastest programmable camera pan/tilt head on the market. Can be Hand-controlled Instead of relying on a remote control, manually adjust the pan & tilt angle of HeadPLUS and program your camera motion with just your hands! This gives an unprecedented speed to your workflow and makes the entire process much more intuitive. Perfect on the inside Super Accurate Backlash-free Gear DesignAll edelkrone motorized products use the same backlash-free gear design technology for perfectly repeatable, smooth motion for even the most demanding shots. Even the most portable edelkrone devices have heavy-duty gears assuring lifetime good performance.Ultra Quiet Step Motor Driving TechnologyAll edelkrone motorized devices have a unique quiet step motor driving technology that combines ultra precise step motor positioning ability with ultra quiet operation. Step motors are perfect for precise motion control but until now their downside has been the noise they make. With edelkrone motorized devices, you will get the world’s most precise positioning with the quietest performance

Manfrotto MVH502AH Full smoothness control while shooting thanks to the variable fluid mechanisms. Ideal for latest camcorder and HDSLR cameras supplied with external accessories (4kg max capacity). The Manfrotto MVH502AH head can be combined with all photo tripods, thanks to the 3/8” female thread

edelkrone Steady Module v1 If you prefer operating your SliderPLUS manually and would like to achieve motion control level smoothness while hand-pushing, Steady Module is your go-to solution. Steady Module easily eliminates shaky hands (human error) and enables silky smooth camera motion even at ultra low speeds.Works great even with heavy camera loads. Unlike regular slide stabilizing solutions, aka flywheels (inertia modules), Steady Module works perfectly even with heavy camera loads. edelkrone Steady Module v1 will enable you to nail that perfect shot even when you are at a very remote location. No batteries, no chargers required; completely mechanical solution. Uses fluid dynamics to dampen the movement Simply adjust tension with the wheel to achieve desired dampening. Steady Module is designed to smooth out low to medium slide speeds. At high speeds, since there will already be enough momentum for a smooth slide, you don't need to use Steady Module. Steady Module v1 beautifully handles inclines even when your SliderPLUS is vertical! Just don't take your hands off of the system while descending. This will put all the weight on Steady Module, which is not recommended for the safety of your gear.

edelkrone HeadPLUS v2 PRO edelkrone HeadPLUS v2 PRO is a Motorized Pan & Tilt Head with optional add-ons Target Module, Vision Module and Focus/Zoom Module. Wireless & seamless compatibility within the entire edelkrone ecosystem. HeadPLUS is the simplest camera head to use and can be programmed by demonstrating the desired movement, making it the fastest programmable camera pan/tilt head on the market. Size (L x W x H)HeadPLUS PRO: 433 mm x 103 mm x 78 mmL Bracket (folded): 191 mm x 145 mm x 80 mm WeightHeadPLUS PRO: 4.3 kg (including the L-Bracket and recommended batteries) L Bracket: 556 gr Mounting options3/8"-16 mounting port on bottom1/4"-20 mounting screw on L bracket (also 3/8"-16 mounting screw is included for compatible cameras) In the box HeadPLUS PROL Bracket for cameras up to 9 kgAC/DC AdapterSony NP-F Battery BracketsWidth extenders for SliderPLUS legsallen keys Can be paired with SliderONE v2Motor Module (Previously known as Slide Module v3 and Slide Module v2)SliderPLUS v5SliderPLUS v5 PRODollyONEDollyPLUSFocus/Zoom ModuleTarget ModuleSliderPLUS

Manfrotto MVH500AH MVH500AH is a lightweight head with a wider platform for HDSLR bodies which has a sliding plate which travels to balance the latest interchangeable lens cameras. The entry-level 500 ensures smooth shots and fine control with up to 5kg (11lbs) of equipment. It’s the most compact head in our successful Bridging Technology™ range and it replaces the Manfrotto 701HDV video head. Beautifully smooth shots: the 500 has professional fluid cartridges on both pan and tilt axes to ensure that every camera movement is smooth, controlled and precise. Faster, easier and safer to use: the side lock system allows the camera and sliding QR plate to click quickly into the head from above, instead of needing to be aligned and slid in from the back. No secondary safety lock is necessary. The side lock system also makes it quicker and simpler to lift the camera out of the head from above. The 500 has a pre-set counterbalance of 2.4kg (5.3 lbs), but is able to support equipment of up to 5kg (11 lbs). The 500 has one Easy Link 3/8” connector to allow an external monitor or other accessory equipment to be fitted. MVH500AH head with flat base tripod mount for attachment to a hybrid photo/video tripod, a traditional photo tripod, slider, a monopod or other supports. MVH500AH Technical data Attaches by. 1/4" and 3/8" attachment typeAttachment 3/8" screw attachment typeBubble spirit level (no.) 1 numberCenter Of Gravity 55 mmColor black colorCounterbalanced Weight 2.4 kgFront tilt -70° / +90° tilt rangeHead bowl 60mmIndependent pan lock yesIndependent tilt lock yesLateral tilt -70° / +90° tilt rangeMaterial aluminumMaximum working temperature 60.0 °CMinimum working temperature -20.0 °CPan bar positions 2 numberPan bars included (no.) 1 numberPan drag fluid cartridge with fixed dragPanoramic rotation 360 degreesPlate type 500PLONGQuick release yesSafety Payload Weight 5.0 kgSecondary safety system yesSpring loaded counter balance yesTilt drag fluid cartridge with fixed dragWeight 1.12 kgWorking height 12.6 cm

edelkrone HeadONE edelkrone HeadONE is a pocket-sized, ultra smooth Pan and/or Tilt motor for stunning motion-controlled videos and time-lapses. edelkrone HeadONE connects wirelessly to edelkrone sliders and dollies but you may also attach it to sliders, tripods, dollies, and other supports as well as placed directly on flat surfaces . Via an iOS/Android app you may choose between motion-controlled panning shots, time-lapse sequences, stop-motion shots, and 360 panorama photo capture. Two HeadONE with dedicated bracket give you combination of turntable kit for product shots. Size (L x W x H): 99 x 95 x 47.5 mmWeight: 580 gRecommended camera load Pan: 6.8 kgMounting options: 3/8"-16 mounting screw on top. 3/8"-16 mounting port on bottom. (3/8"-16 to 1/4"-20 reducer bushing for mounting port are provided.)Min. step size: 0.00061 degreeMax. speed: 25.7 degree/secNumber of axes: SingleMax. rotation: ∞ x 360°Motor type: Step motor with ultra high-res encoders.Supported fps: AllPower input: Requires x1 Canon LP-E6 type battery to operate. Battery bracket included. Battery not included.Battery life: To be announced.Shutter trigger cable socket: 2.5 mm (shutter trigger cable sold seperately)Can be paired: SliderONE v2, Slide Module v2, DollyONE, DollyPLUSMobile device connection: Bluetooth low-energy communication.App. compatibility: iOS 11.0 or later & Android 5.0 or laterMaterials: CNC machined aluminum & stainless steel components