Manfrotto Genie Mini II

Syrp Genie II Linear The Syrp Genie II is compatible with 100s of different cameras including DSLRs, Mirror-less cameras and video cameras. The Syrp Linear drive is an all-new supercharged version of the original Genie, with in-built joystick, Genie II Linear can attach to any slider or other accessory on the market to transform it into a motion control device Specs Maximum Speed : 160mm / SecMinimum Resolution: Linear: 0.01mmBattery Timelapse Mode: 14hrsBattery Video Mode: 8hrsBattery Charge time: 3hrsBattery: Li-Ion 11.1V 2600 mAh Rechargeable BatteryHorizontal Operation Payload: 7.5kgVertical Operation Payload: 5kgWeight  0.9kg incl batteryInterface : USB-C Port (s) - Charging, Camera Trigger, Camera Control / Bluetooth 4.2 Low Energy - Connect to Syrp Genie App / WIFI 2.4GhzTop Mount Type : 1/4-20 or 3/8-20 UNC Screws for mounting camerasUnderside Mount Type : 3/8 UNC Thread for attaching to sliders, tripods, other systems (1/4" to 3/8" Adaptor also included) In the box 1 x Genie II Linear Drive 1 x 3m (9.9ft) Genie Rope 1 x USB-C to 2.5mm link cable adapter 2 x Rope Attachment Hooks 1 x 90mm Quick Release Plate - 1/4" and 3/8" screws 1 x USB-C Charging Cable 1 x USB-C International Wall Charger 1 x USB-C to USB-A Adapter 1 x 1/4" to 3/8" Adaptor

Syrp Genie Mini II Pan Tilt Kit Set includes 2 x SYRP Genie Mini II1 x Syrp Pan Tilt Bracket

CamDo Blink CamDo Blink Time Lapse Controller is CamDo’s latest GoPro time lapse and motion detection controller for HERO4 cameras. It is a low power, WiFi enabled GoPro accessory that unlocks the full potential of the GoPro camera. Use CamDo Blink to achieve long term time lapse or motion detection for your next project. Just plug it into your GoPro and use the Blink app to connect and configure up to 10 separate time lapse schedules using a smartphone, tablet, computer, or any WiFi enabled device which has a web browser (no cell service or internet connection required). Quick & Easy Set-Up Get Blink up and running in less than 2 minutes. While typically used with our Outdoor Enclosures to also house extra battery packs, Blink will also fit inside the extended backdoors included in the GoPro Back Door Kit that are designed to fit GoPro BacPac accessories. Simple Configuration for Complete Control Intuitive web interface makes scheduling Blink a breeze. Customize a daily or weekly schedule to program up to 10 separate schedules for either time lapse or motion detection in photo, day, night, burst or video modes. Low Power Consumption Blink powers your GoPro camera down between intervals, increasing the battery life significantly and giving you the ability to undertake long term time lapse sequences. Blink is powered from the GoPro battery and does not require a separate power source. Email Home with Blink Email Blink can e-mail you every day to confirm it is still operating - how many shots were taken since the last e-mail, what is the battery status, what is the SD card status - everything to give you peace of mind your system is working. No Camera Firmware Update Required Blink doesn’t require a complicated camera firmware update process. Just ensure your HERO3+ or HERO4 camera is up to date with the latest firmware from the GoPro website or through the GoPro App for iOS and Android. Motion Detection Motion detection schedules can be programmed to only be active only during certain times of day to avoid capturing unneeded footage and conserve power Blink Overview 1. USB: Blink can be powered from the GoPro camera's battery through the HERO Port and does not need to be powered separately. Blink's USB interface is used for firmware updates2. LED: This provides feedback to the user during operation, as well as for firmware updates3. Port 1: This input accepts the Wired Remote or other custom trigger. The Wired Remote is used to turn WiFi On/Off, as well as provide LED feedback during operation.4. Port 2: The X-Band Motion Detector accessory plugs directly into this input. Support for other accessories such as a PIR sensor will be added in the future. Do not connect anything other than the motion detector cable into this input!In the box A. CamDo Blink B. Wired Remote C. USB OTG Cable (for future updates) D. X-Band Motion Detector (optional purchase) 

edelkrone HeadONE edelkrone HeadONE is a pocket-sized, ultra smooth Pan and/or Tilt motor for stunning motion-controlled videos and time-lapses. edelkrone HeadONE connects wirelessly to edelkrone sliders and dollies but you may also attach it to sliders, tripods, dollies, and other supports as well as placed directly on flat surfaces . Via an iOS/Android app you may choose between motion-controlled panning shots, time-lapse sequences, stop-motion shots, and 360 panorama photo capture. Two HeadONE with dedicated bracket give you combination of turntable kit for product shots. Size (L x W x H): 99 x 95 x 47.5 mmWeight: 580 gRecommended camera load Pan: 6.8 kgMounting options: 3/8"-16 mounting screw on top. 3/8"-16 mounting port on bottom. (3/8"-16 to 1/4"-20 reducer bushing for mounting port are provided.)Min. step size: 0.00061 degreeMax. speed: 25.7 degree/secNumber of axes: SingleMax. rotation: ∞ x 360°Motor type: Step motor with ultra high-res encoders.Supported fps: AllPower input: Requires x1 Canon LP-E6 type battery to operate. Battery bracket included. Battery not included.Battery life: To be announced.Shutter trigger cable socket: 2.5 mm (shutter trigger cable sold seperately)Can be paired: SliderONE v2, Slide Module v2, DollyONE, DollyPLUSMobile device connection: Bluetooth low-energy communication.App. compatibility: iOS 11.0 or later & Android 5.0 or laterMaterials: CNC machined aluminum & stainless steel components