MID49 Base Kit For Canon C400

Vocas Top Cheese Plate for Canon C400SKU: 0350-5200 This top cheese plate is specifically designed for the Canon C400 and can be used in combination with original top handgrip of the Canon C400. Compatible with rail holders 0350-1430 (19 mm) and 0350-1431 (15 mm) for attaching a single rail on top the camera for use with lens motors. Also compatible with our lens adapter support 0900-0085, for super rigid attaching your Vocas PL or LPL lens adapter.

MID49 Top Plate For Canon C400 SKU: M49-CAG-CC4-TOP Top Plate (Canon C400) attaches to the top of the camera and provides 1/4-20 and 3/8-16 threaded holes with ARRI accessory pins, M4x20mm ARRI standard threaded holes, and includes an adapter for attaching Canon's original C400 top handle (ARRI 3/8-16 to Canon Striped Rosette / Canon Mic Mount). When not using the adapter for Canon's handle, it can be positioned on the Top Plate to provided mounting points for Canon's included microphone shock mount.Additional ARRI 3/8-16 to Canon Striped Rosette / Canon Mic Mounts are available if needed. The Top Plate's center ARCA dovetail clamp allows for attachment of the the Rainbow Handle Kit, ARCA Top Handle, ARCA Top Plate, and Gimbal Adapter Plates (Freefly Mōvi Pro and DJI Ronin 2) for quick change between handheld and studio modes. Side 3/8-16 ARRI accessory mounts can accept Cage NATO Side Arm (ARRI 3/8-16) for cage building.

MID49 Breakout Boxes and Side Plate Bundle For Canon C400 SKU: M49-BOB-SPB-C4 Breakout Boxes and Side Plate Bundle for Canon C400 includesBreakout Side Plate for Canon C400, which attaches to the ARRI rosette on the side of the camera and provides a 15mm rod clamp for attaching lens motors, a female ARRI rosette for attaching Canon's handgrip, and a breakout box mounting area with 1/4-20's and recessed cable loops for attaching the included breakout boxes AB-10 and EB-10.Audio Breakout AB-10 (Canon C400) is a passive adapter that converts the camera's two mini XLRs using a custom, low-profile connection to two standard, full-size XLRs.DIN Timecode Genlock Breakout EB-10 (Canon C400) converts the DIN 1.0/2.3 connectors using a custom, low-profile connection to standard BNCs for Timecode and Genlock.Also included is a 1/4-20 knurled knob for attaching Canon's microphone shock mount to the top of the breakout panel.

MID49 Breakout Side Plate For Canon C400 SKU: M49-BOB-SPL-C4 Breakout Side Plate for Canon C400 attaches to the ARRI rosette on the side of the camera and provides a 15mm rod clamp for attaching lens motors, a female ARRI rosette for attaching Canon's handgrip, and a breakout box mounting area with 1/4-20's and recessed cable loops for attaching the Audio Breakout AB-10 (Canon C400) and DIN Timecode Genlock Breakout EB-10 (Canon C400), which are available separately. Also included is a 1/4-20 knurled knob for attaching Canon's microphone shock mount to the top of the breakout panel. The Breakout Side Plate for Canon C400 is available as a discounted kit with the AB-10 and EB-10: Breakout Boxes and Side Plate Bundle for Canon C400

MID49 Breakout Side Bar Only For Canon C400 SKU: M49-BOB-SBO-C4 Breakout Side Bar Only for Canon C400 clamps to a 15mm rod and provides a breakout box mounting area with 1/4-20's and recessed cable loops for attaching the Audio Breakout AB-10 (Canon C400) and DIN Timecode Genlock Breakout EB-10 (Canon C400), which are available separately. Also included is a 1/4-20 knurled knob for attaching Canon's microphone shock mount to the top of the breakout panel.

MID49 Power Distribution Box DB-10 (Canon C400)Power Distribution Box DB-10 (Canon C400) attaches to the back of the camera using the included ARCA Backpack and provides intelligent power distribution with D-Taps, 5V USB-C PD, 3pin Fischers, and 2pin LEMO compatible connectors.Removable REMOTE LANC cable enables remote start/stop capability using 3pin Fischer devices. Hot swap between onboard battery and 4pin XLR DC INPUT without losing camera or accessory power. When both sources are connected, the DC INPUT takes priority down to 12.5V at which point, the DB-8 will switch to an onboard battery.The ARCA Backpack design allows Canon's BP-A30N battery to be installed in the camera to function as an emergency backup. To swap the internal battery, unlock the ARCA Backpack thumbscrew, slide up, and release the battery.With the SMART FUSE design, camera power is monitored and the remaining power budget is allocated to accessories. For example, the C400 uses approximately 1.6A at 14V so when using a 10A capable battery, the remaining 8.4A is allocated for accessory use. If an accessory configuration exceeds the 8.4A limit, accessory power is cut off, leaving the camera powered. The "SMART FUSE" LED will illuminate showing the error and once the configuration has been adjusted to lower than 8.4A, the RESET button can be pressed and power will be re-enabled to accessory outputs. In the event of a complete short circuit, the system will immediately shut down and can only be turned back on once the short circuit has been removed.The DB-10 is also compatible with Canon C300mkIII and Canon C500mkII start/stop capability requires a longer REMOTE LANC cable.INPUTSBATT V-Mount plate / Gold Mount PlateDC IN 4pin XLR (11-17V)OUTPUTS2x D-Tap (battery voltage)2x 3pin (24V at 2.5A with run/stop)2x 2pin (battery voltage)1x USB-C PD (5V at 3A with thread lock)

MID49 Power Distribution Box DB-10 (Canon C400)Power Distribution Box DB-10 (Canon C400) attaches to the back of the camera using the included ARCA Backpack and provides intelligent power distribution with D-Taps, 5V USB-C PD, 3pin Fischers, and 2pin LEMO compatible connectors.Removable REMOTE LANC cable enables remote start/stop capability using 3pin Fischer devices. Hot swap between onboard battery and 4pin XLR DC INPUT without losing camera or accessory power. When both sources are connected, the DC INPUT takes priority down to 12.5V at which point, the DB-8 will switch to an onboard battery.The ARCA Backpack design allows Canon's BP-A30N battery to be installed in the camera to function as an emergency backup. To swap the internal battery, unlock the ARCA Backpack thumbscrew, slide up, and release the battery.With the SMART FUSE design, camera power is monitored and the remaining power budget is allocated to accessories. For example, the C400 uses approximately 1.6A at 14V so when using a 10A capable battery, the remaining 8.4A is allocated for accessory use. If an accessory configuration exceeds the 8.4A limit, accessory power is cut off, leaving the camera powered. The "SMART FUSE" LED will illuminate showing the error and once the configuration has been adjusted to lower than 8.4A, the RESET button can be pressed and power will be re-enabled to accessory outputs. In the event of a complete short circuit, the system will immediately shut down and can only be turned back on once the short circuit has been removed.The DB-10 is also compatible with Canon C300mkIII and Canon C500mkII start/stop capability requires a longer REMOTE LANC cable.INPUTSBATT V-Mount plate / Gold Mount PlateDC IN 4pin XLR (11-17V)OUTPUTS2x D-Tap (battery voltage)2x 3pin (24V at 2.5A with run/stop)2x 2pin (battery voltage)1x USB-C PD (5V at 3A with thread lock)

Battery Slide Pro (Canon C300mkIII, C400, C500mkII) Battery Slide Pro (Canon C300mkIII, C400, C500mkII) utilizes a WC Pro Gold Mount or V-Mount plate and provides battery voltage to the camera through a 4pin XLR connector. Features a custom Battery Slide which attaches directly to the back of the camera without rods. This system retains access to the battery compartment and allows an internal BPU battery to be installed, giving the user the ability to hot swap batteries. To adjust battery plate position, loosen the thumbscrew and slide. DC Input on camera-right side can be used for hot-swapping between block battery and on-board battery.Features 3x D-Tap ports at battery voltage for accessory power and digital fuse which cuts off accessory outputs while leaving the camera powered.SpecificationsWeight: 349.27 gDimensions: 152.4 x 101.6 x 44.4 mm

Battery Slide Pro (Canon C300mkIII, C400, C500mkII) Battery Slide Pro (Canon C300mkIII, C400, C500mkII) utilizes a WC Pro Gold Mount or V-Mount plate and provides battery voltage to the camera through a 4pin XLR connector. Features a custom Battery Slide which attaches directly to the back of the camera without rods. This system retains access to the battery compartment and allows an internal BPU battery to be installed, giving the user the ability to hot swap batteries. To adjust battery plate position, loosen the thumbscrew and slide. DC Input on camera-right side can be used for hot-swapping between block battery and on-board battery.Features 3x D-Tap ports at battery voltage for accessory power and digital fuse which cuts off accessory outputs while leaving the camera powered.SpecificationsWeight: 349.27 gDimensions: 152.4 x 101.6 x 44.4 mm

Vocas Essential kit for Canon EOS C400SKU: 0255-7500Essentials kit for the for the Canon EOS C400 camera combines the most popular Vocas accessories for this camera into a complete set for the most demanding cameraman. It features a 15 mm Universal Shoulder Base Plate (0350-2200) which allows the user to find the optimal balance for the camera on either tripod or when operating it on your shoulder.The kit includes our cheese plate (0350-5200) which fits around the original Canon top handle, giving you multiple extra connection points on top of your camera for 1/4” and 3/8” pinlock accessories and a rigid support for our PL lens adapter (0900-0085)This kit also comes with a viewfinder bracket (0700-0086) with a 170 mm. long NATO rail to prevent your viewfinder from tilting, resulting in a crooked horizon. The adjustable handgrip extender (0390-0040) lets you relocate the Canon side handgrip further to the front of the camera. An USB-C extension cable is also included.This kit is all you need when you want to use your Canon EOS C400 as a shoulder camera.Technical dataRosette: 2 IntegratedShoulder pad: Adjustable, Interchangeable, Removable, ToollessShoulder pad size: StandardBars position: Front , RearBars system: 15 mmHeight adjustable: yesMounting options: 1/4" Pin Lock, 3/8" Pin Lock, RosetteCamera mounting points: 1VCT-14 quick release compatibility: YesToolless VCT-14 rear adjustment: YesSliding System compatible: YesMaterial: Aluminum, Rubber, Stainless steelWeight: 1,268 kgIn the boxVocas USBP-15 MKII SKU: 0350-2200Vocas Top Cheese Plate for Canon C400 SKU: 0350-5200Vocas Adjustable handgrip extender SKU: 0390-0040Vocas Viewfinder bracket for Canon EOS C200 / C500 MKII / C300MKIII SKU: 0700-0086Vocas Single sided NATO rail with single 15 mm (170 mm) SKU: 0710-1170