MID49 Breakout Side Plate For Canon C400

€180.00*

gross: €214.20

Product number: SW28252

MID49 Breakout Side Plate For Canon C400

SKU: M49-BOB-SPL-C4

Breakout Side Plate for Canon C400 attaches to the ARRI rosette on the side of the camera and provides a 15mm rod clamp for attaching lens motors, a female ARRI rosette for attaching Canon's handgrip, and a breakout box mounting area with 1/4-20's and recessed cable loops for attaching the Audio Breakout AB-10 (Canon C400) and DIN Timecode Genlock Breakout EB-10 (Canon C400), which are available separately. Also included is a 1/4-20 knurled knob for attaching Canon's microphone shock mount to the top of the breakout panel. The Breakout Side Plate for Canon C400 is available as a discounted kit with the AB-10 and EB-10: Breakout Boxes and Side Plate Bundle for Canon C400

Similar products

MID49 Breakout Side Plate for RED KOMODO / KOMODO-X

MID49 Breakout Side Plate SKU: M49-BOB-SPL-KX Breakout Side Plate for RED KOMODO and RED KOMODO-X attaches to the side of the RED Komodo and Komodo-X and provides 1/4-20, 3/8-16 with ARRI locating pins, an ARRI standard rosette, and M4x20mm threaded holes. Two offset M4 holes matching RED's spacing allow certain 3rd party products to be attached like GDU Atlas Side Handle (Komodo, Right)When used on RED Komodo-X, rear 1/4-20's provide ideal mounting locations for Audio Breakout AB-1 (RED Komodo-X) and EXT Breakout EB-1 (RED Komodo, Komodo-X).When used on the original RED Komodo, combine with Audio Breakout AB-3 (RED Komodo) and EXT Breakout EB-1 (RED Komodo, Komodo-X).The Side Plate is compatible with RED's PL Mount support, as seen in this installation guide.Recessed cable loops in the side plate allow for clean cable management.

€139.00*

gross: €165.41

MID49 Breakout Side Plate for RED V-Raptor

MID49 Breakout Side Plate for RED V-Raptor SKU: M49-BOB-SPL-RVR Breakout Side Plate for RED V-Raptor attaches to the side of the RED V-Raptor and provides 1/4-20, 3/8-16 with ARRI locating pins, an ARRI standard rosette, and M4x20mm threaded holes. Two offset 1/4-20 holes matching RED's spacing allow certain 3rd party products to be attached like GDU Atlas Side Handle (Raptor, Right). Rear 1/4-20's provide ideal mounting locations for Audio Breakout AB-1 (V-Raptor) and EXT Breakout EB-1. Recessed cable loops in the side plate allow for clean cable management. Weight: 102gDimensions: 137 x 108 x 12mm

€125.00*

gross: €148.75

MID49 Breakout Side Bar Only For Canon C400

MID49 Breakout Side Bar Only For Canon C400 SKU: M49-BOB-SBO-C4 Breakout Side Bar Only for Canon C400 clamps to a 15mm rod and provides a breakout box mounting area with 1/4-20's and recessed cable loops for attaching the Audio Breakout AB-10 (Canon C400) and DIN Timecode Genlock Breakout EB-10 (Canon C400), which are available separately. Also included is a 1/4-20 knurled knob for attaching Canon's microphone shock mount to the top of the breakout panel.

€95.00*

gross: €113.05

Accessories

MID49 Audio Breakout AB-10 (Canon C400)

MID49 Audio Breakout AB-10 for Canon C400 SKU: M49-BOB-AB10 Audio Breakout AB-10 for Canon C400 is a passive adapter that converts the camera's two mini XLRs to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or optional Breakout Side Plate for Canon C400 for clean cable management.Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-10 to attach using a 3/8-16 screw with ARRI locating pins.Attaches easily to rods using the Single 15mm Rod Clamp or Single 19mm Rod Clamp (sold separately). 23cm cable length with custom low profile right angle mini XLR connector.

€175.00*

gross: €208.25

Free shipping

MID49 DIN Timecode Genlock Breakout EB-10 (Canon C400)

MID49 DIN Timecode Genlock Breakout EB-10 For Canon C400 SKU: M49-BOB-EB10 DIN Timecode Genlock Breakout EB-10 (Canon C400) converts the DIN 1.0/2.3 connectors to standard BNCs for Timecode and Genlock. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or optional Breakout Side Plate for Canon C400 for clean cable management.Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Mounting Bracket (ARRI 3/8-16, Rear Mount) (sold separately), which allows the EB-10 to attach using a 3/8-16 screw with ARRI locating pins. 23cm cable length with custom low profile dual DIN male interface.

€250.00*

gross: €297.50

MID49 Breakout Side Plate For Canon C400

MID49 Breakout Side Plate For Canon C400

The professional source for Filmmakers in Düsseldorf

We provide best equipment and advice in the field of professional video- and audio- technology