Mole Richardson 900W SeniorLED 9341
Mole Richardson 900W SeniorLED
- Type 9341 Tungsten DMX
- Type 9351 Daylite DMX
Pushing LED technology to new limits...introducing the Mole Richardson 900W SeniorLED. The first of its kind, with 5K equivalent output in a single source LED. With its sleek new design and exceptional color quality it's guaranteed to leave an impression. Power supply ballast built into trough. 5kw tungsten equivalent and exceeds output of 1200W HMI.
The Mole Richardson MoleLED Fresnels are powered by a new, proprietary Mole-Richardson Co. Quantum Dot chip on-board LED module. The benefit of QD LED technology is the ability to specifically tune the visible wavelength at the nano scale which, in this case, allows for precise adjustment of the red spectrum without impacting the overall light output of the LED. This Patent Pending LED board represents the first time QD LED's are being used in the film, television and broadcast industries.
900W SeniorLED Specifications
- Head Type 9341 Tungsten / Type 9351 Daylite
- Rating 90-250 Volts AC, 50-60Hz, 900 Watts, 8 Amps Max. DMX Standby Draw <.20 Amps Max.
- Light Source (1) - 900 Watt Mole-Richardson LED 3100K 95CRI Tungsten & 5600K 90CRI Daylight
- Switch Thru-cord Toggle in Cable, DMX or Local Toggle in Trough
- Fuse15 Amp Slow-Blow. Fuseholder in Trough
- Dimming Flicker Free, Direct DC Dimming Local Dimmer 100% - 0% (Minimal Color Shift) DMX Dimmer 100% - 0% (Minimal Color Shift)
- Control DMX512-A In and Out. Manual DMX Address Selector
- Beam Angle 10° to 55° Variable Spot to Flood (Includes Field)
- Focusing Rotating Knob on BackCoolingPassive-Forced Air
- Construction Aluminum and Steel with Interlocking Channels
- Yoke Aluminum w/Standard 1 1/8 in (29mm) Pin
- Compliance RoHS. CE, UL, CSA Pending
- IP Rating 30
- Finish Textured Black Powder Epoxy Coat. (Other Colors Available)
- Size 533 mm x 432 mm x 660 mm
- Head Weight 18.60 kg
- Condenser (Borosilicate Glass Fresnel) 254 mm
Accessory Items
KUPO 721 Jumbo Stand 2 sections
€2,200.00*
gross: €2,618.00
KUPO 721 Jumbo
The Kupo Jumbo Stand is made of chromed steel, and is specifically designed to meet the industry's need for extra heavy loads with the ultimate goal of safety in mind. This Kupo Jumbo Stand can support a load capacity of up to 100 kg and delivers a maximum working height of 175 cm. when it is fully extended. Features Kupo's direct drive gear mechanism and auto-locking instead of pullies and cables.
Features
Large size T-handle on each riser is ergonomically design for maximum torque28mm (1-1/8”) junior receiver with 3 eyelets for wind bracing kitDual handle equipped on bottom spider casting for easily folding the baseLeg brace is made of rectangular steel tubing for maximum stability and safety Auto self-locking device prevents unintentional and uncontrolled lowering of the loadIndustry 6” (152mm) braked caster included makes stand moveable in the studio or on locationAssembled by nuts and bolts for easier maintenance and tightness adjustable instead of fixed rivet
Free shipping
KUPO 485 Heavy Duty Wind-Up Low Base Steel Stand
€1,539.00*
gross: €1,831.41
KUPO 485
KUPO 485 Heavy Duty Wind-Up Low Base Steel Stand features a mechanical lifting assist with a hand-crank and an auto-locking safety system that enables a single operator to lift heavy loads with precision and confidence.
The center tube, legs and U-shape struts are constructed from stainless steel with the top two chrome plated steel sections for extra stability.
For safety loading weight up to 80 kg in a small 130cm footprint.
Features
Constructed of Chrome plated steel (Top 2 section), stainless steel (center tube & legs)Max height: 270cm / Max load: 80 kgFeatures a mechanical lifting assist with a hand-crank enables a single operator to lift heavy loadsPatented auto self-locking device prevent from unexpected drop-offLow working height for easier operation
Technical data
3 sections., Diameter: 70mm, 60mm, 50mmLeg Diameter: 35mm2 risers extend simultaneously at one elevation of 4.4cm per handle turn.Top 2 sections: Chrome plated steelCenter tube & legs: Stainless steelWith 1 leveling legWith Auto Self-Locking DeviceWith Braked CasterFolded length: 156cmMaximum height: 270cmMinimum height: 140,5cmFootprint diameter: 130cmWeight: 34kgMaximum payload: 80kg
KUPO 756 Jumbo Stand with Braked Wheels
€4,063.00*
gross: €4,834.97
KUPO 756 Jumbo
The Kupo Jumbo Stand, made from chrome plated steel, is specifically designed to satisfy the industry’s requirement for extra heavy loads with the ultimate goal of safety in mind.
The Kupo Jumbo Stand can support a load capacity up to 70kg and delivers a maximum working height of 6.1m when fully extended. Features Kupo's direct drive gear mechanism and auto-locking instead of pulleys and cables.
Features
Made of Chrome plated steel, designed to satisfy the industry's requirement for extra safe operation with a heavy loadOversize big handle on each riser for biggest torqueBrace on leg made of rectangular steel tubing for maximum stability and safetyDual handle equipped on bottom spider casting for easily folding the baseMax height: 6.1m / Max load: 70kg
Technical data
Weight: 75600gFolded Length: 2300mmMaximum Height: 6100mmMaximum Payload: 70kg
Free shipping
KUPO 484 Heavy Duty Wind-Up Low Base Steel Stand
€1,579.00*
gross: €1,879.01
KUPO 484
Kupo wind-up stands are constructed with chrome plated steel and a geared column that enables a single operator to raise and lower heavy loads safely with just the turn of a handle.
KUPO 484 features a mechanical lifting assist with a hand-crank and an auto-locking safety system that enables a single operator to lift heavy loads with precision and confidence. The center tube, legs and U-shape struts are constructed from stainless steel with top two chrome plated steel sections for extra stability and allows the safety loading weight up to 80kg.
Features
Solid and strong handle with slip-free designKC-150 industry 6”braked caster with angle adjustable plate allows 484 to securely stand on the ground when the caster is removed28mm socket with 3 side holes for wind bracing kitAuto Self-Locking Device stops unexpected drop off, and makes operation saferLarger foot step with skidproof texture designU-shaped struts are made of stainless steel for extra stability and safety
Technical data
3 sections., Dia.: 70mm, 60mm, 50mmLeg Dia.: 35mm2 risers extend simultaneously at one elevation of 4.4cm per handle turn.Top 2 sections: Chrome plated steelCenter tube & legs: Stainless steelWith 1 leveling legWith Auto Self-Locking DeviceWith Braked Caster (KC-150) Folded length: 196cmMaximum height: 386cmMinimum height: 179cmFootprint diameter: 180cmWeight: 39kgMaximum payload: 80kg
Similar products
Mole Richardson 200W JuniorLED
€2,895.00*
gross: €3,445.05
Mole Richardson JuniorLED 200W
A relative newcomer to the landscape of Mole-Richardson Juniors, the 8 Junior (203mm) is a perfect blend of small size, plentiful beam spread and impressive output. Seamless integration with existing Tungsten Halogen Incandescent and drawing a maximum of 2 Amps.
Available in types
Type 8841 Tungsten (Non-DMX)Type 8941 TungstenType 8941-51Rev Tungsten Pole-OperatedType 8851 Daylite (Non-DMX)Type 8951 DayliteType 8951-51Rev Daylite Pole-Operated
Introducing the MoleLED Fresnels - Mole Richardson JuniorLED. A design familiar to generations of lighting professionals is now loaded with state of the art electronics and the latest LED technology. These revolutionary fixtures use a proprietary Quantum Dot LED developed and produced by Mole to replicate film and television 3200K Tungsten and 5600K Daylight exactly. High-output, with unparalleled color quality and a borosilicate glass Fresnel lens, the MoleLED Fresnels perform identically to an incandescent or HMI Fresnel fixture. In addition, Mole added features like a universal power supply, built-in local dimming as well as on-board DMX dimming. Now, you are no longer tied to an external dimming system or any one voltage.In an industry inundated with mass produced, eco-friendly products, the Mole Richardson MoleLED Fresnels are truly a hybrid of hand crafted quality and the most advanced solid state lighting technology available. From the ground up, the MoleLED Fresnels are designed, engineered and built in the USA for professionals everywhere.Product Benefits
An 80% reduction in energy consumption Flicker-Free dimming with little to no color shift No need for external dimming systems No direct IR or radiant heat from Fresnel And so much more
Specifications
Heads: Type 8941 Tungsten and Type 8951 DayliteRating: 90-250 Volts AC, 50-60Hz, 200 Watts, 1-2 Amps Max.DMX Standby Draw <.10 Amps Max.Light Source: (1) - 200 Watt Mole-Richardson Quantum Dot LED3200K 95CRI Tungsten & 5600K 90CRI DaylightCable: Attached 25 ft (7.6m) Type SO., 3 Conductor, #18 AWG with NEMA 5-15 Edison (Other plugs and wire lengths available upon request)Switch: Thru-cord Toggle in Cable, DMX or Local Toggle in TroughFuse: 2 Amp Slow-Blow. Fuseholder in TroughDimming: Flicker Free, Direct DC Dimming, On-Board Dimmer 100% -10% (Minimal Color Shift) DMX Dimmer 100% - 0% (Minimal Color Shift)Control: DMX512-A In and Out. Manual DMX Address SelectorCondenser: 8 in (203mm) Borosilicate Glass FresnelBeam Angle: 13° to 54° Variable Spot to Flood (Includes Field)Focusing: Rotating Knob on Front and BackCooling: Passive-Forced AirConstruction: Aluminum and Steel with Interlocking ChannelsYoke: Cast Aluminum w/Standard 11/8 in (29mm) PinCompliance: RoHS. CE, UL, CSA PendingIP Rating: 30Finish: Textured Black Powder Epoxy Coat. (Other Colors Available)Size: 12 in/305mm(d) x 14 in/356mm(w) x 205/8 in/524mm(h)Head Weight: 14lbs/6.40kg (Head Only) 16lbs/7.23kg (Head with 25ft/7.6m cable)
Variants from €2,595.00*
Mole Richardson 100W TweenieLED
€2,099.00*
gross: €2,497.81
Mole Richardson 100W TweenieLED
Seamless integration with existing Tungsten Halogen Incandescent,similar performance and optics as other 4.5" (114mm)Mole Fresnels, and about 80% less power consumption.
Type 8911 DayliteType 8811 Daylite (Non-DMX)Type 8911 Daylite Pole OperatedType 8901 TungstenType 8801 Tungsten (Non-DMX)Type 8901 Tungsten Pole Operated
Introducing the MoleLED Fresnels- Mole Richardson TweenieLED. A design familiar to generations of lighting professionals is now loaded with state of the art electronics and the latest LED technology. These revolutionary fixtures use a proprietary Quantum Dot LED developed and produced by Mole to replicate film and television 3200K Tungsten and 5600K Daylight exactly. High-output, with unparalleled color quality and a borosilicate glass Fresnel lens, the MoleLED Fresnels perform identically to an incandescent or HMI Fresnel fixture. In addition, Mole added features like a universal power supply, built-in local dimming as well as on-board DMX dimming. Now, you are no longer tied to an external dimming system or any one voltage.In an industry inundated with mass produced, eco-friendly products, the MoleLED Fresnels are truly a hybrid of hand crafted quality and the most advanced solid state lighting technology available. From the ground up, the MoleLED Fresnels are designed, engineered and built in the USA for professionals everywhere.
Advantages of TweenieLED 100W
5,600K BalanceCRI: 90100 -10% Local Dimming100 - 0% DMX DimmingIP 30 Rating90-250VACAluminum Alloy and Steel ConstructionLow Electrical Draw7.62 m Cable
Benefits
An 80% reduction in energy consumptionFlicker-Free dimming with little to no color shiftNo need for external dimming systemsNo direct IR or radiant heat from FresnelSpecifications
Head(s): Type 8901 Tungsten / Type 8911 DayliteRating 90-250 Volts AC, 50-60Hz, 100 Watts, 1 Amp Max. DMX Standby Draw <.05 Amps Max.Light Source (1) - 100 Watt Mole-Richardson Quantum Dot LED 3200K 95CRI Tungsten & 5600K 90CRI DaylightSwitch Thru-cord Toggle in Cable, DMX or Local Toggle in TroughFuse 2 Amp Slow-Blow. Fuseholder in TroughDimming Flicker Free, Direct DC Dimming Local Dimmer 100% - 0% (Minimal Color Shift) DMX Dimmer 100% - 0%(Minimal Color Shift)Control DMX512-A In and Out. Manual DMX Address SelectorBeam Angle 22° to 56° Variable Spot to Flood (Includes Field)Focusing Rotating Knob on Front and BackCooling Passive-Forced AirCable Attached 5 ft (4.6m) Type SO., 3 Conductor, #18 AWG with NEMA 5-15 Edison (Other plugs and wire lengths available upon request)Construction Aluminum and Steel with Interlocking ChannelsYoke Cast Aluminum w/Standard 5/8 in (16 mm) ReceiverCompliance RoHS. CE, UL, CSAIP Rating 30Finish Textured Black Powder Epoxy Coat. (Other Colors Available)Size 200 mm x 229 mm x 406 mmHead Weight 2.72 kg (Head Only) / 3.63 kg (Head with 25 ft / 7.6 m cable)Condenser 113 mm Borosilicate Glass Fresnel
Variants from €1,699.00*