RigWheels A-Cup Suction Cup

RigWheels RigPlate Camera Suction Mount (A-Cups) SKU: RPSM-AC The RigPlate Camera Suction Mount is one of the most stable suction mounts available. The wide footprint of the four suction cup and the low-profile of the mount provides you with a solid platform to work with and security in knowing that you’re not relying on only one cup to protect your equipment.In the box 1 x RigPlate4 x A-Cup Suction Cup1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer You will notice 3 different versons of suction cups that are offered for use in the car suction mounts A-CupsB-CupsC-Cups

RigWheels Cloud Mount PRO SKU: CM-P The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount PRO adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup8 x C-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key1 x Sidecar Tray

RigWheels RigMount XL Sidecar Hostess Tray SKU: RMXL-SC The Sidecar / Hostess Tray configuration is one of our favorites to get some great classic angles. Because the sides of vehicles generally have a lot of curves and contours A-Cup suction cups are recommended for this setup because they can conform the the curves. When possible magnets are preferred because of the more solid connection. Sidecar/Hostess Tray includes 2 x RigPlate6 x RigAxle8 x A-Cup – Suction Cup4 x 3 Prong Knob – 5/16-18 x 1″1 x 5/16″ bolt – 2″ Long1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer4 x Wing Nut – 5/16″6 x 5/16″ Washer2 x 5/16″ bolt – 7/8″ Long

RigWheels RigPlate SKU:RP01 RigPlate is one of the most versatile pieces of camera mounting hardware you can own. Versatility is king at RigWheels. RigWheels designs everything with versatility in mind and the RigPlate camera cheese plate delivers. The first function is to serve as a camera mounting plate to attach MicroWheels to. One RigPlate and one set of MicroWheels provides you with smooth movement as a table-top / skater dolly that you can use on any smooth hard surface.Using Rigwheels RigPlate as a pipe dolly gives you scalable slider / dolly option that is tailored for the new generation of mid-size and compact cameras. Attaching two RigPlates together creates a captive-rail camera carriage that allows secure camera movement at any angle. Using RigPlate in conjunction with RigAxels adds even more capability to this simple affordable system with a more traditional table-top dolly setup and a robust pipe-dolly option.RigPlate is a great camera support platform and it can be used for much more than camera movement. With the amount and variety of mounting points there are an endless variety of accessories that can be attached. There are (14) 1/4-20 and (4) 3/8-16 threaded holes (industry standard sizes) in addition to four 5/16” and five 3/8” pass through holes. A RigPlate can be turned into a rock-solid suction mount by adding A-Cups, B-Cups or C-Cups. One thing we’re excited about is our new RigMount products. New camera technology allows us to use magnets which would have never been considered a few years ago when using video tape. The hi-power RigMount magnetic mounts provide a new solution for mounting cameras in unique and different ways. A single RigMount is also a great solution for mounting sports/action cameras and smaller still cameras.

RigWheels Cloud Mount DSLR SKU: CM-DS The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on RigMount XL mounting platform, the RigWheels Cloud Mount DSLR adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the RigWheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. Cloud Mount DSLR - In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)8 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 1″ – Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key

RigWheels Cloud Mount Standard SKU: CM-FSThe RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available. Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount Full Size adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle. This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key

RigWheels Cloud Mount SideCar SKU: CM-SC The RigWheels Cloud Mount SideCar is the upgraded assortment of parts for out Sidecar/Hostess Tray configuration. This includes all of the parts for the standard (hood/roof/trunk) configuration plus the additional components necessary for the sidecar / hostess tray / underslung configurations. In the box 3 x RigPlate6 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 2″ Thumb Knob4 x 5/16″ x 1″ Thumb Knob2 x 5/16″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup2 x 5/16″ bolt – 7/8″ Long1 x 3/16″ Hex Key1 x 5/32″ Hex Key2 x 5/16″ x 3/4″ Thumb Knob4x 5/16″ Female Thumb Knob