RigWheels Longboard Wheel LW01

RigWheels RailDolly Carriage only SKU: RD01 If you want to DIY your own end-brackets you can purchase just RailDolly carriage and get the same smooth movement as in more complete systems.The RailDolly Carriage has a large footprint and provides great stability when using a full-size cameras.The RailDolly is also a good option for critical audio recording because operation is silent with it’s semi-soft wheels. This configuration uses one RigPlate, two RigAxles and two different types of skate wheels. The RailDolly Camera Slider can also be used on square or rectangular rails. Square/rectangular rails are much more rigid at long lengths than tube/pipe so if you’re going to be putting a BIG camera rig in motion this is an ideal option. With the components in this kit you can also configure our RigSkate so you get 2 great options for movement. If attaching a ball mount tripod head you will need one of our Bowl Mount Adapters. This configuration also included the parts to configure our RigSkate so you get 2 great options for movement.

RigWheels Passport 2 SKU: PCD2 The Passport 2 Slider/Dolly System is tailor made for traveling professionals and remote on-location production. The all-in-one design and rock solid build quality make the Passport 2 Slider/Dolly system ideal for international documentary and network news style production where larger/heavier camera systems (up to 100 pounds) are being used and a stable, reliable platform is needed. The Passport 2 has dedicated (screw in) tripod-head adapters which allow for more range-of-moting for leveling your head as well as quicker setup. The entire RigWheels Passport 2 kit is flight ready at 50lbs (23kg) an won’t incur expensive excess charges. 6.3′ (1.95m) of track collapse into 19″ sections that pack along with the slider carriage, end-brackets and ball-head adapters into the included custom Pelican 1610 protector case (with wheels & handle). The track/tubes are the strongest and most accurate collapsable rail that we have seen on the market. Constructed from high-grade 6061 aluminum for rigidity and machined to a tolerance of .001″, sections of track connect seamlessly via threaded connectors (you will not notice a “bump” when rolling over them). The 19″ sections are interchangeable with our larger 40″ PortaRail systems so if longer range is needed, you can always add more length. At the included 6.3′ length, the rails have less than 1/8″ of flex with a 40lb load placed at the center. Transporting long pipe or tube for a suspended rail system like this has been prohibitive in the past for both cost and convenience reasons. Our goal in designing this system was to provide a professional solution for traveling production that does not require carrying additional bags or a bunch of extra hardware and stands to operate. The all-in-one design of the Passport slider/dolly can save $100 or more per trip in just checked bags. Portable dolly systems where track is placed on the ground have achieved this in the past but the Passport suspended rail dolly offers a lot more flexibility in where and how you can use it such as on uneven terrain or placing the system over objects. One of the practical design elements of the carriage is that it can be used as a high-hat without any reconfiguration. Just jump the entire camera and carriage off the rails and place it wherever you like. Like all of RigWheels products, the Passport is multi-function and the included components can be used to configure the RigSkate tabletop skater. In the box 1 x RigPlate Pro2 x RigAxle 4 x Inline Wheel 4 x Longboard Wheel 8 x 19″ PortaRail 1pc 8 x PortaRail Connector 16 x Rubber End Caps 1 x Passport Camera Dolly Case 2 x Baby Junior Adapter 2 x 18″ Cross Bar 4 x Variable Size Pipe Clamp 1 x 100mm Ball Adapter Pro 1 x 75mm Ball Adapter Pro 1 X Flat Adapter for RigPlate Pro 4 x 3” Stand Off 8 x 3 Prong Knob – 5/16-18″ 4 x 3 Prong Knob – 1/4-20″ 4 x Long 5/16″ Wheel Spacer 4 x 5/16″ Bolt – 3-1/2″ Long 4 x 5/16″ Bolt – 1-1/4″ Long 12 x 5/16″ Washer 3 x 3/8″ Bolt – 3/4″ Long 3 x 3/8″ Washer 2 x 3/8″ Split Washer 4 x Wing Nut – 5/16″

RigWheels Passport Camera Dolly SKU: PCD1 The Passport Camera Dolly System is tailor made for traveling professionals and remote on-location production. The all-in-one design and rock solid build quality make the Passport Camera Dolly system ideal for international documentary and network news style production where larger/heavier camera systems (up to 100 pounds) are being used and a stable, reliable platform is needed. The entire kit is flight ready at 50lbs (23kg) an won’t incur expensive excess charges. 6.3′ (1.95m) of track collapse into 19″ sections that pack along with the camera dolly carriage, end-brackets and ball-head adapters into the included custom Pelican 1610 protector case (with wheels & handle). This system includes RailDolly Camera Dolly CarriageUniversal End Brackets75 & 100mm Ball Head Adapters8 x 6.3′ of PortaRail in 19″ sections.Pelican 1610 Protector Case with Custom Foam Individual components 1 x RigPlate22 x RigAxle4 x Inline Wheel4 x Longboard Wheel8 x 19″ PortaRail 1pc8 x PortaRail Connector16 x Rubber End Caps1 x Passport Camera Dolly Case2 x Baby Junior Adapter2 x 18″ Cross Bar4 x Variable Size Pipe Clamp1 x 100mm Ball Adapter1 x 75mm Ball Adapter8 x 3 Prong Knob – 5/16-18″4 x 3 Prong Knob – 1/4-20″4 x Long 5/16″ Wheel Spacer4 x 5/16″ Bolt – 3-1/2″ Long4 x 5/16″ Bolt – 1-1/4″ Long12 x 5/16″ Washer3 x 3/8″ Bolt – 3/4″ Long3 x 3/8″ Washer2 x 3/8″ Split Washer4 x Wing Nut – 5/16″