RigWheels Monorail Overhead Gimbal Slider (20' Kit)

RigWheels MonoRail Conductor Integration Kit This is the eMotimo Conductor Integration Kit for Monorail. Pair this with the Monorail Hardware - Conductor Ready for all of the components needed from both eMotimo & RigWheels.Underneath the hood of the Conductor Sa2.6 is a first of its kind array of processors that can seamlessly control pan / tilt / roll / focus / zoom / monorail, all at the same time. But just because something moves doesn't mean that it moves well.The magic is in the software. eMotimo has dedicated years to building algorithms that make the moves seamless and are easy for the end user to implement.Control OptionsDirect Control using Gaming Controller - This is the best place to start for simplicity and speed. Power up the Conductor, connect the remote, and follow the prompts on the screen. The range of the controller is about 20-60 feet based on your environment. If you are using a battery and a wireless transmitter for your camera, this solution does not need to have wires attached so it's easy to rigOver Network with Bitfocus Companion - Plug into eMotimo Conductor’s wired Network Port. From anywhere on your network you can control the Monorail + Conductor with prebuilt Bitfocus Companion configurations on Stream Deck controllersOver Network with Skaarhoj PTZ controllers - Plug into eMotimo Conductor’s wired Network Port. From anywhere on your network you can control the Monorail + Conductor with PTZ controller from Skaarhoj In the boxeMotimo Monorail Conductor intrgration kit

RigWheels 19″ PortaRail SKU: PR19 Weight 0.77 kgDimensions 50.8 cm x 5.08 cm x 5.08 cm

RigWheels PortaRail SKU: PR01 PortaRail collapsible camera slider rail now available. Sections are 40″ (1 meter) long and can be screwed together seamlessly via the threaded connectors. These rails are constructed from high grade 6061 aluminum which is much stronger than the architectural aluminum that is sometimes used for similar applications. The stronger material provides much more rigidity which means a more solid system with very little flex. At 80″ the camera slider rails have less than 1/8″ of flex with a 40 pound load placed at the center. Each piece goes through a 6 step process to make them straight enough and round enough for precision camera movement. 4 sections total (80″ per side) is typical for most setups but you can add as many sections as you need for longer shots. This product can also be used with many other suspended or ground-rail systems that work with a similar OD. The outside diameter is 1.65″ (41.9mm).