RigWheels PTZ-WM-PC Wall Mount Vibration Isolator with Pipe Clamps
Free shipping
Product number:
SW27043
Manufacturer:
RigWheels
EAN:
854821004101
Manufacturer product number:
PTZ-WM-PC
Delivery time:
7-14 days
RigWheels PTZ Wall Mount Vibration Isolator with Pipe Clamps
SKU: PTZ-WM-PC
RigWheels PTZ Wall Mount Vibration Isolator with Pipe Clamps is intended to be attached to vertical or angled pipe/tube between 1-1/8″ and 2″ in diameter. These clamps can also clamp onto rectangular tubing (1.5 x 2″ rectangular tubing for example). Both overhead and wall mounted positions can also be used with our high power RigMount Magnets for applications such as mounting to a overhead I-Beam or warehouse speed-racks.
ATTENTION! pictured tube not included
Details of the manufacturer
- Rigwheels
- 414 Gateway Blvd
- Burnsville, MN 55337, United States
+1 612-999-1311
Details of the person responsible for putting the product on the European market
- NEFAL service & consulting e. K.
- Am Heerdter Hof 24
- 40549 Düsseldorf, Germany
+49 (0) 211 930 730-33
Related links of the manufacturer
Accessory Items
Free shipping
Tip
BirdDog P4K 4K 10-Bit Full NDI PTZ Camera
€7,800.00*
gross: €9,282.00
BirdDog P4K
BirdDog P4K is the real deal. A huge 1” Sony Exmor R CMOS backlit Sensor and 14.4 million effective pixels enable P4K to deliver stunning pictures in 4K resolutions with Full Bandwidth NDI. Excellent light sensitivity makes P4K perfect for all broadcast applications, sports, remote studios, newsrooms, house of worship and any shoot where quality matters. The best images come from the best sensors and the P4K is built exclusively around the best sensor in its category. The massive 1” Sony Exmor R CMOS backlit sensor delivers truly stunning pictures in all shoot modes and frame rates whether in HD or 4K.
P4K is a PTZ designed for the most demanding live production shoots and supports all the traditional frame rates you would expect including 29.97 but now you can use your PTZ as a camera for TVC’s, drama, and shoot 24p for that wonderful cinematic look.
Full NDI. Two independent 6G SDI outputs and one HDMI 2.0 output, all live all the time to create amazingly flexible workflows.
Features
4K 10-Bit Full NDI PTZ Camera1” Sony Exmor R CMOS back-lit 4K sensorSupports NDIDual 6G-SDI ports and HDMI 2.012x optical zoom with image stabiliserWide dynamic rangeAvailable in Black or White
Free shipping
BirdDog Eyes P200 Full NDI PTZ Camera WHITE
€1,900.00*
gross: €2,261.00
BirdDog Eyes P200
BirdDog Eyes P200 is 1080P Full NDI PTZ Camera w/Sony Sensor & HDMI/3G-SDI
P200 PTZ camera utilizes BirdDog’s custom NDI® silicon chip and leverages an impressive Sony CMOS backlit sensor and full Sony Image Module.
Designed for serious production the image quality of P200 is best in class. Built on a true Sony Image module with Sony CMOS backlit sensor, P200 has super fast focus, incredibly sharp images, and amazingly fast zoom. P200 has frame rates up to 1080p60, 30x optical zoom, and outputs SDI, HDMI, and NDI® simultaneously. 3.5mm audio connectors allow P200 to work with BirdDog Comms, the world’s first NDI audio intercom platform. Comms is a Windows 10 application that can run on any Windows 10 compatible computer, laptop, or surface for a touch screen experience.
P200 has been designed for the most demanding on image quality. The superior optics make P200 perfect for Sports, Broadcast, Live Event Production, IMAG, Education, and any other application where quality matters. P200 can also be used as a traditional PTZ camera with SDI, RS422, RS485, and RS232 control allowing you to move into the world of NDI® when you are ready.
Features
Full NDI PTZ CameraFull NDI using BirdDog’s custom NDI silicon chipSony CMOS Backlit SensorFull Sony Image Module1080p6030x Optical ZoomTriple output – NDI, SDI, and HDMI all simultaneousSuper low latencyCompatible with BirdDog Comms, the world’s best NDI Intercom SystemCompatible with BirdDog Central, the world’s best NDI delivery platformCompatible with BirdDog PTZ KeyboardAvailable in Black/ or White/
Free shipping
BirdDog Eyes P200 Full NDI PTZ Camera BLACK
€1,900.00*
gross: €2,261.00
BirdDog Eyes P200
BirdDog Eyes P200 is 1080P Full NDI PTZ Camera w/Sony Sensor & HDMI/3G-SDI
P200 PTZ camera utilizes BirdDog’s custom NDI® silicon chip and leverages an impressive Sony CMOS backlit sensor and full Sony Image Module.
Designed for serious production the image quality of P200 is best in class. Built on a true Sony Image module with Sony CMOS backlit sensor, P200 has super fast focus, incredibly sharp images, and amazingly fast zoom. P200 has frame rates up to 1080p60, 30x optical zoom, and outputs SDI, HDMI, and NDI® simultaneously. 3.5mm audio connectors allow P200 to work with BirdDog Comms, the world’s first NDI audio intercom platform. Comms is a Windows 10 application that can run on any Windows 10 compatible computer, laptop, or surface for a touch screen experience.
P200 has been designed for the most demanding on image quality. The superior optics make P200 perfect for Sports, Broadcast, Live Event Production, IMAG, Education, and any other application where quality matters. P200 can also be used as a traditional PTZ camera with SDI, RS422, RS485, and RS232 control allowing you to move into the world of NDI® when you are ready.
Features
Full NDI PTZ CameraFull NDI using BirdDog’s custom NDI silicon chipSony CMOS Backlit SensorFull Sony Image Module1080p6030x Optical ZoomTriple output – NDI, SDI, and HDMI all simultaneousSuper low latencyCompatible with BirdDog Comms, the world’s best NDI Intercom SystemCompatible with BirdDog Central, the world’s best NDI delivery platformCompatible with BirdDog PTZ KeyboardAvailable in Black/ or White/
Similar products
RigWheels PT-Zero Vibration Isolator Hanging
€690.00*
gross: €821.10
RigWheels PT-Zero Vibration Isolator Hanging
SKU: PT-Z-H
The PT-Zero greatly improves on the performance of our original PTZ isolators by adding new isolation / damping components which provide 3X more isolation.
The PT-Zero uses more than 30 new isolation components to deliver amazing resultsMore options tailored for PTZ cameras to get your camera in the ideal spotPre-assembled components make installation and optimization more intuitive for users and systems integratorsThe optimal weight range of 8-12 lb is easy to achieve with additional weights available for smaller camerasPrecision machined parts made in the USA provide unmatched build quality for PTZ camera installation
The PT-Zero Hanging configuration is the option that provides the best possible isolation for your PTZ Camera. The isolator is configured for a target weight range of 8-12 pounds. Lighter cameras can be used but for best performance, our weights should be added to fall into the target weight range. The isolator ships assembled and other accessories like the wall mounting bracket can be added based on you’re installation requirements.
RigWheels PT-Zero Vibration Isolator Upright
€599.00*
gross: €712.81
RigWheels PT-Zero Upright
The PT-Zero looks similar to the previous PTZ isolators however, there is a lot more isolation happening. We’ve added more than 30 new isolation components which dramatically increases the degree of isolation possible. We’ve also added more mounting and positioning options.
We’ve made it much more easy to install the PT-Zero than the previous isolators. The PT-Zero uses a target weight range of 3,62-5,44 kg. Certainly, there are lots of quality PTZ cameras that are lighter than this so we have created weights that can be added to get to the target weight. The RigWheels PT-Zero isolator sections ship fully or partially assembled (depending on the option selected) and the other wall brackets and mounting accessories can be added on easily.
In some scenarios, it’s necessary or convenient to place the PTZ camera on top of a surface or stand. With the newly added isolation components, we now also get exceptional results with the “camera-on-top” position and can offer this configuration for more installation options.
Free shipping
RigWheels PTZ-OI-PC Overhead Vibration Isolator with Pipe Clamps
€730.00*
gross: €868.70
RigWheels PTZ Camera Overhead Vibration Isolator with Pipe Clamps
SKU: PTZ-OI-PC
RigWheels PTZ Camera Overhead Vibration Isolator with Pipe Clamps opinion is intended to be attached to overhead pipe/tube between 1-1/8″ and 2″ in diameter. These clamps can also clamp onto rectangular tubing (1.5 x 2″ rectangular tubing for example)
For a PTZ or fixed camera installation, this system provides excellent isolation because ALL of the load can be placed directly on the elastic vibration isolating components. For vehicle mounting the cables in the system provide structure so the mount doesn’t bounce around erratically. For installations, the cables used are present for two purposes, 1) security in the event that the elastic tubes fail over time. 2) To prevent “pancaking”. When larger cameras pan left/right quickly, there needs to be some structure in the mount so the inertia doesn’t create a lateral/twisting swinging effect.
Every installation is different so are several options for how you can mount a PTZ camera with this solution however, there are two primary methods.
From above - Directly to a ceiling or to a pipe/tube/truss using RigWheels Universal Pipe Clamps.
ATTENTION: Pictured tube not included
Free shipping
LIBEC LX-ePed Electric pedestal with Floor Spreader
€3,315.50*
gross: €3,945.45
LIBEC LX-ePed
LIBEC LX-ePed is an electric pedestal with Floor Spreader for PTZ cameras
As demand for PTZ cameras is dramatically increasing in the field of broadcast and production, the need for support equipment suitable for PTZ cameras continues to soar. This patent pending LX-ePed was specially developed in order to respond to such demands. This world’s first electric pedestal for PTZ cameras can be remotely operated with a wired controller. With the maximum payload of 10kg, the LX-ePed is able to support most PTZ cameras. There are two types to choose from: the simple Floor Spreader type, and the convenient Dolly type.
Features
Electric Elevation Pedestal with Remote Control Continuous Speed Adjustment Highly Reliable Wire Connection System V-mount Battery Powered (optional) Compatible with Flat-Base Equipment with a 1/4" or a 3/8" Screw Hole Compatible with Video Heads Compact Design High-Angle Shots User Friendly Accessory Port Safety Design Built-in Bubble Level
Technical data
Payload: 10kgElevation: 400mm Raising/Lowering speed: Approx. 14 to 40 secs. / movement Continuous operating time: 3 minutes LAN cable for controller: 30mPower cable: 3mPower: AC100V～240V Temperature range: -10°C to 40°C below RH90％ Battery-powered: Optional Camera attachment: 1/4" and 3/8" screws Head attachment: 100mm / 75mm bowl Accessory attachment: 1/4" and 3/8" screw holes x 2 Bubble level: Available Weight: 11.2kgHeight: 95.5 to 247cmSection: 2-Stage
RigWheels PTZ-OI PTZ Camera Overhead Vibration Isolator
€649.00*
gross: €772.31
RigWheels PTZ Camera Overhead Vibration Isolator
SKU: PTZ-OI
The RigWheels PTZ camera vibration isolator is the perfect solution to improve image quality for fixed installations in theaters, concert venues, houses of worship, classrooms, factories with machine vibration and other similar locations. This innovative mount is designed to reduce unwanted vibrations that can negatively impact your camera’s performance, allowing you to capture clear and stable images.
RigWheels PTZ camera vibration isolator is capable of reducing vibrations from various sources, including loudspeakers, machinery, foot traffic and other problematic sources. This results in exceptionally improved image stability, ensuring that your footage remains clear, even in challenging environments.
RigWheels PTZ Camera Overhead Vibration Isolator PTZ-OI opinion is intended to be bolted/screwed directly to ceiling or overhead surface using standard hardware.
Free shipping
RigWheels PTZ-WM Wall Mount Vibration Isolator
€899.00*
gross: €1,069.81
RigWheels PTZ Camera Wall Mount Vibration Isolator
SKU: PTZ-WM
RigWheels PTZ Wall Mount Vibration Isolator is intended to be bolted/screwed directly to wall or vertical surface using standard hardware.
The PTZ camera vibration isolator is made in the USA and constructed with high-quality materials, including machined 6061 aluminum mounting plates and high quality elastic dampening elements. It is designed to be easy to install, allowing you to quickly set up and start using your camera without any additional hassle.
This design can also be easily adapted to provide vibration isolation for video projectors.
With its versatile design, the PTZ camera vibration isolator can accommodate a wide range of cameras, making it a perfect addition to your existing equipment. The elastic isolation components are cut-to-length corresponding to the weight of the camera being attached to the mount to provide the best isolation possible. Whether you’re recording a concert, capturing footage of a religious service, or conducting any other kind of fixed installation video recording with PTZ camera or remote heads, this mount is a must-have for capturing high-quality footage that’s free from distracting vibrations.