RigWheels RB23 Rail Brackets with Cross Bars Set of 2

€230.00*

gross: €273.70

Prices excl. VAT plus shipping costs

RigWheels Rail Brackets

13″ Cross Bars

18″ Cross Bars

23.5″ Cross Bars

Product number: SW19448.2

RigWheels Rail Brackets

RigWheels Rail Brackets are universal in BOTH width and pipe size so they can be used with virtually any suspended rail type slider/dolly on the market. You can use pipe with an outside diameter between 1″ (24mm) and 2″ (50mm). You can also use square/rectangular rails up to 1-3/4″

The useable distance between the rails (center to center) is adjustable from 5″ to 21.5″ with the 3 different lengths of cross-bars we stock. You can also use full or half-strut widely available at hardware stores to make custom lengths.

Each set includes 2 pieces (both ends of the track)

13″ Cross Bars are the correct size for MicroWheels Carriage 1, MicroWheels Carriage 2 & MicroWheels Carriage 3
18″ Cross Bars are the correct size for the RailDolly Configurations
23.5″ Cross Bars are here for future uses

In the box

2 x Cross Bar
4 x Variable Size Pipe Clamp
2 x Baby Junior Adapter
8 x 3 Prong Knob – 5/16-18″
2 x 3 Prong Knob – 1/4-20″
2 x 3/8″ Bolt – 3/4″ Long
2 x 3/8″ Split Washer
2 x 3/8″ Washer
8 x 5/16″ Washer

Similar products

RigWheels RailDolly Carriage only

RigWheels RailDolly Carriage only SKU: RD01 If you want to DIY your own end-brackets you can purchase just RailDolly carriage and get the same smooth movement as in more complete systems.The RailDolly Carriage has a large footprint and provides great stability when using a full-size cameras.The RailDolly is also a good option for critical audio recording because operation is silent with it’s semi-soft wheels. This configuration uses one RigPlate, two RigAxles and two different types of skate wheels. The RailDolly Camera Slider can also be used on square or rectangular rails. Square/rectangular rails are much more rigid at long lengths than tube/pipe so if you’re going to be putting a BIG camera rig in motion this is an ideal option. With the components in this kit you can also configure our RigSkate so you get 2 great options for movement. If attaching a ball mount tripod head you will need one of our Bowl Mount Adapters. This configuration also included the parts to configure our RigSkate so you get 2 great options for movement.

€299.00*

gross: €355.81

RigWheels MicroWheel Stage-2 Linear Slider Carriage

RigWheels MicroWheel Stage-2 SKU: MWS2 The MicroWheel Stage 2 combines 6 MicroWheels, 1 RigPlate and 1 RigAxel to make a captive rail linear slider. The captive carriage configuration makes your camera much more secure by locking it onto the rails. This setup also allows you to position the carriage/rails at any angle; just the trick for vertical or slanted moves. This kit offers a similar captive rail option to the MicroWheel Stage 3 carriage at a lower price but is not as suitable for handling vertical and angled movement. RigWheels linear slider kits and parts are designed for easy expansion and and multifunction use. This linear slider kit allows you to operate on smooth flat surfaces (such as a counter top or glass table) as well as on pipe as shown below. MicroWheel camera dolly wheels will run on any smooth pipe with an outside diameter between 1″ & 2″. In addition to the variety of styles of movement you can achieve with this kit, you always have the ability to increase functionality by adding different parts. For example, you can add 1 more RigAxel and 4 inline wheels to configure RigSkate. RigWheels are mounted to the RigPlate with common 5/16″ OR 8mm bolts. As often as possible, common parts and hardware are used in Rigwheels products to give customers the ability to modify and come up with different configurations. This linear slider travels extremely well. With the RigWheels removed, the flat 5/16″ thick RigPlates can fit in many common places like a laptop pocket. 4 RigWheels packed into their included travel bag are about the size of a portable hard drive. Aluminum and steel pipe/tube are recommended for suspended camera slider applications like this. 1 x RigPlate1 x RigAxle6 x MicroWheel2 x 3/8" Bolt 6" Long4 x 3/8" Wing Nut7 x 3/8" Washer4 x 5/16" Bolt 1-1/4" Long6 x 5/16" Washer6 x 5/16" Wing Nut6 x 5/16" Short Wheel Spacer2 x 5/16" Bolt 3" Long3/8" Bolt 3/4" Long2 x 3/8" Split Washer

€357.00*

gross: €424.83

RigWheels MicroWheel Stage-1 Camera Slider Carriage

RigWheels MicroWheel Stage-1 SKU: MWS1 MicroWheel Stage 1 Portable Camera Slider combines 4 MicroWheels and 1 RigPlate with the appropriate mounting hardware for use together.RigWheels portable camera slider kits and parts are designed for easy expansion and and multifunction use. This camera slider carriage allows you to operate on smooth flat surfaces (such as a counter top or glass table) as well as on pipe as shown below. MicroWheel camera slider wheels will run on any smooth pipe with an outside diameter between 1″ & 2″.In addition to the variety of styles of movement you can achieve with this kit, you always have the ability to increase functionality by adding different parts. For example, you can add 2 RigAxels with inline wheels to configure RigSkate. Add a second RigPlate or a RigAxel with MircoWheels and you can configure a captive rail camera dolly.MicroWheels are mounted to the RigPlate with common 5/16″ OR 8mm bolts. As often as possible, common parts and hardware are used in Rigwheels products to give customers the ability to modify and come up with different configurations. This portable camera slider travels extremely well. With the MicroWheels removed, the flat 5/16″ thick RigPlate can fit in many common places like a laptop pocket. The 4 MicroWheels pack into their included travel bag are about the size of a portable hard drive. Pipe and tube for track can be found at most any hardware store. PVC pipe works well for applications when the pipe will be on the ground or a solid surface. Aluminum and steel pipe/tube are recommended for suspended camera dolly applications. In the box 1 x RigPlate 1 x RigAxle 4 x MicroWheel Camera Dolly Wheels4 x 5/16" Bolt (1.25" Long)8 x 5/16" Nut3/8" Bolt (0.75" Long)

€275.00*

gross: €327.25

RigWheels MicroWheel Stage-3 Camera Slider Carriage

RigWheels MicroWheel Stage-3 Camera Slider Carriage SKU: MWS3 The MicroWheel Stage 3 Carriage combines 8 MicroWheels and 2 RigPlates to make a captive rail camera slider. The dual carriage configuration makes your camera slider much more secure by locking it onto the rails. This setup also allows you to position the carriage/rails at any angle; just the trick for vertical or slanted moves.RigWheels camera slider kits and parts are designed for easy expansion and and multifunction use. This camera slider carriage allows you to operate on smooth flat surfaces (such as a counter top or glass table) as well as on pipe as shown below. MicroWheel camera dolly wheels will run on any smooth pipe with an outside diameter between 1″ & 2″.In addition to the variety of styles of movement you can achieve with this kit, you always have the ability to increase functionality by adding different parts. For example, you can add 2 RigAxels with inline wheels to configure RigSkate. 2 x RigPlate2 x MicroWheel Camera Dolly Wheels (4-Pack)1 x 3/8" Bolt 3/4" Long2 x 3/8" Bolt 6" Long2 x 3/8" Split Washer4 x 3/8" Wing Nut7 x 3/8" Washer8 x 5/16" Bolt 1-1/4" Long8 x 5/16" Short Wheel Spacer8 x 5/16" Washer8 x 5/16" Wing Nut

€425.00*

gross: €505.75

RigWheels RB23 Rail Brackets with Cross Bars Set of 2

RigWheels Rail Brackets

Each set includes 2 pieces (both ends of the track)

In the box

The professional source for Filmmakers in Düsseldorf

We provide best equipment and advice in the field of professional video- and audio- technology