RigWheels RailDolly Camera Dolly Kit 1
RigWheels RailDolly & End Brackets
SKU: RDB1
Rigwheels RailDolly & End Brackets includes
- 1 x Rigwheels RailDolly Carriage only
- 1 x RigWheels Rail Brackets with 18″ Cross Bar (Set of 2)
Accessory Items
RigWheels Rail Brackets with Cross Bars Set of 2
€230.00*
gross: €273.70
RigWheels Rail Brackets
RigWheels Rail Brackets are universal in BOTH width and pipe size so they can be used with virtually any suspended rail type slider/dolly on the market. You can use pipe with an outside diameter between 1″ (24mm) and 2″ (50mm). You can also use square/rectangular rails up to 1-3/4″
The useable distance between the rails (center to center) is adjustable from 5″ to 21.5″ with the 3 different lengths of cross-bars we stock. You can also use full or half-strut widely available at hardware stores to make custom lengths.
Each set includes 2 pieces (both ends of the track)
13″ Cross Bars are the correct size for MicroWheels Carriage 1, MicroWheels Carriage 2 & MicroWheels Carriage 318″ Cross Bars are the correct size for the RailDolly Configurations23.5″ Cross Bars are here for future uses
In the box
2 x Cross Bar4 x Variable Size Pipe Clamp2 x Baby Junior Adapter8 x 3 Prong Knob – 5/16-18″2 x 3 Prong Knob – 1/4-20″ 2 x 3/8″ Bolt – 3/4″ Long2 x 3/8″ Split Washer2 x 3/8″ Washer8 x 5/16″ Washer
RigWheels RailDolly Carriage only
€299.00*
gross: €355.81
RigWheels RailDolly Carriage only
SKU: RD01
If you want to DIY your own end-brackets you can purchase just RailDolly carriage and get the same smooth movement as in more complete systems.The RailDolly Carriage has a large footprint and provides great stability when using a full-size cameras.The RailDolly is also a good option for critical audio recording because operation is silent with it’s semi-soft wheels. This configuration uses one RigPlate, two RigAxles and two different types of skate wheels.
The RailDolly Camera Slider can also be used on square or rectangular rails. Square/rectangular rails are much more rigid at long lengths than tube/pipe so if you’re going to be putting a BIG camera rig in motion this is an ideal option.
With the components in this kit you can also configure our RigSkate so you get 2 great options for movement.
If attaching a ball mount tripod head you will need one of our Bowl Mount Adapters. This configuration also included the parts to configure our RigSkate so you get 2 great options for movement.