Teradek Bolt 6 XT 1500 RX 10-2312

Teradek Bolt 6 XT 1500 TX/RX Deluxe Set Bolt 6 XT has been redesigned to seamlessly fit into your setup, with a smaller, lighter-weight build that runs cooler and 50% quieter than the Bolt 4K. An integrated 5-pin USB port allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors, and an improved long range wireless video mode. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment. The included Transmitter and Receiver are cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models). Teradek Bolt 6 XT offers three line-of-sight options: 750 ft., 1500 ft., and the MAX Set, which can be configured for up to 5,000+ ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. About 6GHz Wifi routers, cell phones, IOT devices, and competitor wireless video systems are among the many devices that use the 5GHz frequency to communicate wirelessly, making it a highly crowded space where you’ll likely encounter frequent interference and even video dropouts. Bolt 6 uses the newly opened 6GHz wireless frequency for a dramatically quieter wireless environment (though it can still be set up in 5GHz Mode for backwards compatibility). In 6GHz Mode, Bolt 6 users will access faster connections and less interference for a better wireless experience. 6GHz frequency is now available in the US and Canada under UNII-5 government specifications. More countries will open the 6GHz frequency in 2023. In the box 1 x Bolt 6 XT 1500 TX V-Mount / Gold-Mount1 x Bolt 6 XT 1500 RX V-Mount / Gold-Mount1 x Antenna Array 2 x Bolt 6 XT Battery Cover Plate Front 1 x Bolt 4K TX Mounting Bracket 1 x Lightstand Adapter 3/8in 1 x Hot Shoe Adaptor 4 x Screw Flat Head Phillips 2 x Screw Socket Cap A S, M3 x 16mm 1 x Hex L key 2.5mm size 3-5/8" length 2 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable 1 x (Bit 718) 2pin Conn. to 2pin Conn. (Alexa) 18in/46cm Cable 2 x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in/46cm Cable 5 x RP-SMA Female to RP-SMA Female 4in/10cm Cable 2 x SDI 12G BNC to BNC 18in/46cm Cable 1 x Teradek Case XL - Bolt XT/4RX and Array Antenna 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable 9 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA 1 x Wooden Camera - Universal Ultra Arm Monitor Mount (Combo 1/4-20 & 3/8-16, 5") 1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable 2 x Bolt 6 XT Battery Cover Plate Rear

Teradek Bolt 6 XT 1500 TX/RX The Bolt 6 XT Set is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 XT can send and receive color-accurate, True-HDR videos in under 0.001 seconds using the set’s included Bolt 6 XT video Transmitter and Receiver Key features of the Teradek Bolt 6 XT Set include range options designed for a variety of production needs, fast reconnection times, intuitive and easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 XT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 XT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. In the box 1 x Bolt 6 XT 1500 TX 1 x Bolt 6 XT 1500 RX 1 x Lightstand Adapter 3/8in 1 x Hot Shoe Adaptor 2 x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in/46cm Cable 2 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable 2 x SDI 12G BNC to BNC 18in/46cm Cable 1 x Teradek Case Large - Bolt XT TX/2RX 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable 9 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA 1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable

SHAPE Pivoting mounting plate SKU: PMPW The SHAPE pivoting mounting plate is designed to mount portable wireless microphone, receivers, hard drive, wireless transmission system and other accessories to your camera. It can be mounted to any 1/4-20 or 3/8-16 threaded hole on your camera, cage, or cheese plate. It features an Anti-slip hook and loop buckle strap that cinches tight against your wireless receiver and presses into the deep rubber padded plate. It has a multiple 1/4-20 thread holes on top and bottom for extra secure attachment. The wireless receiver mounting plate has a friction pivoting angled bracket with multiple mounting possibility. By pivoting up and down it doesn’t obstruct any control button of your camera. The bracket for the mic receiver/accessories can be attached on the left or right side top or back of the camera. Key Features Attaches to Camera top plate or side plates. Supports Mic Receivers/Other Accessories CNC Lightweight anodise aluminum ¼-20 camera screw and 3/8 to 1/4 reducer Anti-slip hook and loop buckle strap