Vocas Cage for Canon C80

MID49 Upper Cage for Canon C80SKU: M49-CAG-CAN-C80 Upper Cage for Canon C80 is a form-fitting cage with 1/4-20, 3/8-16 with ARRI accessory pins, and M4x20mm ARRI-spaced threaded holes in several places. In the center channel, a replica of the Canon striped rosette allows the C80's original handle to be attached. The included top accessory rod holds a combination hot shoe, ARRI 3/8-16, M4x20, and the Canon mic hole pattern for attaching the C80's original microphone shock mount.A special 1/4-20 recess at the end of the rod holds the Audio Breakout AB-4 (Canon C70/C80) which is available as an optional add-on, and converts the camera's two mini XLRs to standard, full-size XLRs. HDMI protector clamps cables securely, and front lens support mount attaches to 3rd party lens adapters like Metabones, etc.Top ARCA Swiss dovetail slot accepts products like our ARCA Top Handle or ARCA Top Plate which are sold separately. Lower ARCA Swiss dovetail attaches to our Baseline 15mm Baseplate to provide rods at the correct lens height and is also available separately.Weight: 438gDimensions (WxLxH): 438 x 132x 162mm

MID49 Base Kit for Canon C80SKU: M49-KTB-CAN-C80 Base Kit for Canon C80 is an accessory kit that includes:Upper Cage for Canon C80Form fitting cage with 1/4-20, 3/8-16, and M4x20mm threaded holes in several places along with a shoe mount and 15mm rod clamps. ARCA Swiss dovetail slot on top accepts included ARCA Top Handle and Top Plate. The 15mm accessory rod provides additional mounting for optional AB-4 XLR adapter. Lower ARCA Swiss dovetail attaches to included baseplate and lens support adapter attaches to 3rd party lens adapters like Metabones, etc.Baseline 15mm LW (Core)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom.Baseline ARRI DovetailBaseline ARRI Dovetail is the lower ARRI mounting plate that interfaces with the Baseline Core.ARCA Top HandleSliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mounts.DataWeight: 830gDimensions (WxLxH): 132 x 183 x 261mm

MID49 Mid Kit for Canon C80SKU: M49-KTM-CAN-C80 Mid Kit for Canon C80 is an accessory kit that includes:Upper Cage for Canon C80Form fitting cage with 1/4-20, 3/8-16, and M4x20mm threaded holes in several places along with a shoe mount and 15mm rod clamps. ARCA Swiss dovetail slot on top accepts included ARCA Top Handle and Top Plate. The included 15mm accessory rod provide additional mounting for included AB-4 XLR adapter. Lower ARCA Swiss dovetail attaches to included baseplate and lens support adapter attaches to 3rd party lens adapters like Metabones, etc.Baseline 15mm LW (Core)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom.Baseline ARRI DovetailBaseline ARRI Dovetail is the lower ARRI mounting plate that interfaces with the Baseline Core.ARCA Top HandleSliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mounts.ARCA Top Plate (114mm)Sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail length.Rod Bracket (15mm LW)Attaches to the Top Handle or Top Plate to provide 15mm LW rod support.Audio Breakout AB-4 (Canon C70/C80)Adapts the camera's two mini XLRs to standard, full-size XLRs2x 15mm 9 inch stainless steel rods are included in the Mid Kit.

Wooden Camera Top Plate for Canon EOS C80SKU: A00834The Top Plate for Canon EOS C80 features a 2-piece design to allow users to remove the section and use the hot shoe on the camera. This plate is securely mounted to the top of the camera using a 1/4”-20 screw and includes tie-down ridges for added stability. When you are not using the hot shoe, the second piece of the top plate securely attaches to the camera using a cold shoe. On the rear of the Top Plate is a mounting point to attach a Battery Slide Pro, ridges on this point add stability by preventing the plate from twisting.The design includes a cut-out to keep the tape hook in its original place, but if you would like to remove it, the design also includes mounting options for the tape hook on the left or right side of the plate. Across the Top Plate and along the sides, are an abundance of mounting points to attach accessories. The two 3/8”-16 mounting points are symmetrical on the front and back, allowing you to attach a Top Plate Dual Rod Clamp and mount 15mm rod-based accessories to the top plate.Weight: 233.1 gDimensions: 95.5 x 92 x 19.5 mm

Wooden Camera ARCA Riser Plate for Canon EOS C80SKU: A00828The ARCA Riser Plate mounts to the bottom of the Canon EOS C80, keeping the camera at the proper optical height when attached to the Base Plate. Included in the design is a Lens Adapter Support Rod to reduce the stress off the RF Mount. An adjustable slide rail allows you to adjust the position of the plate to accommodate your lens mount adapter.The back of the Riser Plate includes a mounting point for the Battery Slide Pro. 10x 1/4”-20 mounting points along the bottom let you add accessories like the ARCA Shoulder Plate and Steadicam Plate without a Bridge Plate.Weight: 205.9 gDimensions: 120 x 105.3 x 44.6 mm

Wooden Camera Base Plate System for Canon EOS C80SKU: K10033The Base Plate System includes an ARCA Base Plate and ARCA Riser that positions the camera at the appropriate optical height for mounting accessories and allows for quick setup transitions.The Wooden Camera Riser Plate can be used alone with the ARCA Shoulder Plate or ARCA Steadicam Plate; the Base Plate is required for tripod or dovetail systems.The Wooden Camera ARCA Riser Plate includes a Lens Mount Adapter with an adjustable rail to distribute any strain from the lens mount to the camera body. This Adapter also prevents the shifting of accessories (like the RF to PL mount) while adjusting lenses. Side-facing 1/4”-20 mounting points let you keep accessories attached while transitioning between setups. The Base Plate allows you to remove the Bridge Plate Dovetail to attach to a Studio Base Plate or directly to a safety dovetail. This plate includes spacing to add support to your setup with other LWS accessories, like the Universal Lens Support (15mm LWS). Tie-downs let you quickly adjust the positioning of the Bridge Plate on accessories like the Safety Dovetail 8”, Unified Bridge Plate, or the Shoulder Rig V3.Included ItemsARCA Riser Plate for Canon EOS C80ARCA Base Plate for Canon EOS C80/ C400SpecificationWeight: 535.2 gDimensions: 120 x 117.7 x 70.4 mm

Wooden Camera Core Accessory System for Canon EOS C80SKU: K10034Our Core System was designed to provide users with the essentials of connectivity while providing a sturdy foundation for growing their build. This lightweight system includes a Top Plate and Ridge Adapter, so users can make use of the native Canon EOS C80 handle.The foundation of this Core System includes an ARCA Base Plate and ARCA Riser that keep your build at the appropriate optical height for mounting accessories in traditional cinema workflows. The built-in ARCA system allows for quick transitions between Steadicam, shoulder, or tripod workflows.Included ItemsARCA Base Plate for Canon EOS C80/ C400ARCA Riser Plate for Canon EOS C80Top Plate for Canon EOS C80Canon 1/4"-20 Ridge Plate (Dual 3/8"-16 Mount)SpecificationsWeight: 789.3 gDimensions: 120 x 117.7 x 89.9 mm

Wooden Camera Elite Accessory System for Canon EOS C80 This system starts with an ARCA Base Plate and Riser that offers a base that keeps your build at the appropriate optical height for mounting accessories in traditional cinema workflows. The built-in ARCA system allows for quick transitions between Steadicam, shoulder, or tripod workflows. Two 12” 15mm rods and a Safety Dovetail are included to round out the foundation of your setup.The NATO Side Rail provides additional mounting points to the operator's side, connecting the Top and Riser plates, creating a robust, secure design that wraps around the camera. To cap off this Elite System is the 2-piece Top Plate that is secured to the top of the camera via a single 1/4”-20 screw and through the hot shoe mount on the back of the camera. The design includes a removable back plate, if the user wants to use the hot shoe mount. This system also includes an Ultra Handle that allows users to securely hold on to your camera as well as adds mounting options for additional accessoriesThe power component of the Elite System is our Pro Gold Mount or V-Mount battery slides that provide external power to the Canon EOS C80. The Battery Slides feature 3x D-Tap ports for accessory power– including a digital fuse, which cuts off accessory outputs while leaving the camera powered. This battery plate can be attached to the Top Plate or Riser Plate by aligning the interlocking ridges and turning the thumbwheel to tighten a 1/4”-20 screw.When mounted to the Top Plate, this system still allows access to the original battery compartment– enabling operators to hot-swap power between both BPU and brick batteries. To adjust the battery plate’s vertical position, loosen the pivoting clamp and slide the plate up or down. Included Items Battery Slide Pro Gold Mount / Battery Slide Pro V-Mount (Canon EOS C70/C80)Top Plate for Canon EOS C80ARCA Riser Plate for Canon EOS C80ARCA Base Plate for Canon EOS C80/C400NATO Side Rail for Canon EOS C80Ultra Handle Upright (Universal 3/8”-16)Ultra Handle 4” ExtensionUltra Handle Extension 1”Safety Dovetail 8”15mm Rod 12” (x2) SpecificationsElite Accessory System for Canon EOS C80 (Gold Mount)Weight: 1955 gDimensions: 135 x 175 x 110 mmElite Accessory System for Canon EOS C80 (V-Mount)Weight: 1955 gDimensions: 135 x 175 x 110 mm

Wooden Camera Elite Accessory System for Canon EOS C80 This system starts with an ARCA Base Plate and Riser that offers a base that keeps your build at the appropriate optical height for mounting accessories in traditional cinema workflows. The built-in ARCA system allows for quick transitions between Steadicam, shoulder, or tripod workflows. Two 12” 15mm rods and a Safety Dovetail are included to round out the foundation of your setup.The NATO Side Rail provides additional mounting points to the operator's side, connecting the Top and Riser plates, creating a robust, secure design that wraps around the camera. To cap off this Elite System is the 2-piece Top Plate that is secured to the top of the camera via a single 1/4”-20 screw and through the hot shoe mount on the back of the camera. The design includes a removable back plate, if the user wants to use the hot shoe mount. This system also includes an Ultra Handle that allows users to securely hold on to your camera as well as adds mounting options for additional accessoriesThe power component of the Elite System is our Pro Gold Mount or V-Mount battery slides that provide external power to the Canon EOS C80. The Battery Slides feature 3x D-Tap ports for accessory power– including a digital fuse, which cuts off accessory outputs while leaving the camera powered. This battery plate can be attached to the Top Plate or Riser Plate by aligning the interlocking ridges and turning the thumbwheel to tighten a 1/4”-20 screw.When mounted to the Top Plate, this system still allows access to the original battery compartment– enabling operators to hot-swap power between both BPU and brick batteries. To adjust the battery plate’s vertical position, loosen the pivoting clamp and slide the plate up or down. Included Items Battery Slide Pro Gold Mount / Battery Slide Pro V-Mount (Canon EOS C70/C80)Top Plate for Canon EOS C80ARCA Riser Plate for Canon EOS C80ARCA Base Plate for Canon EOS C80/C400NATO Side Rail for Canon EOS C80Ultra Handle Upright (Universal 3/8”-16)Ultra Handle 4” ExtensionUltra Handle Extension 1”Safety Dovetail 8”15mm Rod 12” (x2) SpecificationsElite Accessory System for Canon EOS C80 (Gold Mount)Weight: 1955 gDimensions: 135 x 175 x 110 mmElite Accessory System for Canon EOS C80 (V-Mount)Weight: 1955 gDimensions: 135 x 175 x 110 mm