Sony E-mount to PL adapter (Excl. 15mm support!). This adapter allows the use of PL type lenses on cameras that use a Sony E-mount lens mount, such as the Sony NEX-FS100.
Vocas PL support for H-cheese plate Sony PXW-FS7 / FS7 II
SKU: 0900-0027
This Vocas PL support can be mounted on the H-cheese plate for the Sony PXW-FS7 0350-1365 & 0350-1367 and supports the E-mount to PL adapter 0900-0016.
Using these products the Sony PXW-FS7 / PXW-FS7 II can be provided of a perfect lens mount without the necessity of rods. In this way the very light Sony PXW-FS7 / FS7 II stays light.
Vocas Sony E-mount to PL adapter with support kit for FX6
This PL support can be mounted on the top cheese plate for the Sony FX6 (0350-1376) and supports the included E-mount to PL adapter (0900-0024)
Wooden Camera E-Mount to PL Mount Pro (Sony FS5)
SKU: 218200
E-Mount to PL Adapter Pro (FS5) is a shimmable Sony E-Mount to PL mount adapter that enables mounting of all PL mount lenses onto the Sony PXW-FS5. Wooden Camera set the flange focus to match a Sony FS5 camera. You only need to adjust the shims should you find that your camera is out of calibration.
The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Mount includes a support ring that integrates with the Top Plate (Sony FS5), a highly recommended addition to this system. Loosen the support ring thumbscrew to quickly remove the mount and install another adapter. This adapter will also work with any E-Mount camera like the Sony PXW-FS7, A7, A7r, A7s, A7 II, FS100, FS700, NEX-5, NEX-6, NEX-7, etc, however, the support ring would not be utilizedSupport ring capable of integrating with Top Plate (Sony FS5)Includes 2x 1/4-20x3/8" socket cap screws
Shim set (stackable to achieve necessary thickness)
Silver .0127mm (0.0005")Amber .0254mm (0.001")Purple .0381mm( 0.0015")Red .0508mm (0.002")Green .0762mm (0.003")Tan .1016mm (0.004")Blue .127mm ( 0.005")
Technical data
Weight 408 gDimensions 101.60 x 101.60 x 76.20 mm
Metabones PL to Sony E-mount T CINE Speed Booster ULTRA 0.71x
SKU: MB_SPPL-E-BT1
Speed Booster ULTRA for E-Mount and X-mount cameras
The Metabones Speed Booster ULTRA has a magnification of 0.71x, and so it effectively reduces the crop factor of mirrorless cameras with DX-sized sensors and Super35 camcoder, such as Sony E-mount, Fuji X-mount cameras, Sony FS7 MARKII, from 1.5x to 1.07x. However, the new ULTRA design makes very effective use of exotic materials at the furthest limit of glassmaking technology, and as a result is well corrected for use with virtually all fullframe SLR/Prime lenses regardless of exit pupil distance.
Features
Design for attaching full-frame PL Prime Lens to Sony E-mount cameras/camcordersIncrease maximum aperture by 1 stop.Increase MTF.Makes lens 0.71x wider.Advanced 5-element/4-group optical design incorporating ultra-high index tantalum-based optical glass by Caldwell Photographic in the USA (patent pending).New positive-lock PL lens mount. (Patent pending).Felt material flocked inside the opening to reduce internal reflection.Compatible with Sony FS7 Mark II camera.The tripod foot is detachable and compatible with Arca Swiss, Markins, Photo Clam ball heads.
Limitations
Only support full-frame PL Prime lenses, e.g. Compact Prime CP.2 Lenses. Super 35 PL Prime lenses are NOT supported.Speed Booster ULTRA is designed to cover an APS-C/Super35 image circle which is not big enough to cover a full-size 36mm x 24mm sensor. On a full frame camera body (A7 series, NEX-VG900) the camera needs to have "APS-C/Super 35mm" set to either "Auto" or "On".
Tested camera/camcorder bodies
A7S ( in "APS-C Size Capture" mode) A7R ( in "APS-C Size Capture" mode) A7 ( in "APS-C Size Capture" mode) PXW-FS7 MARK IIPXW-FS7PXW-FS5NEX-FS700 NEX-FS100NEX-EA50NEX-VG900NEX-VG30NEX-VG20NEX-VG10NEX-7NEX-6NEX-5RNEX-5NNEX-5NEX-C3NEX-3NEX-A6500NEX-A6000
Wooden Camera E-Mount to PL Mount Pro
SKU: 233400
E-Mount to PL Mount Pro (Sony Alpha, FS7mkII, FX9) is a shimmable version of Wooden Camera's popular Sony E-Mount lens mount adapter that enables mounting of PL mount lenses onto the Sony E-Mount cameras including the Sony FX9 and FS7mkII. The FX9 and FS7mkII have positive locking E-Mounts which eliminate the need for the support foot, but if additional support is desired, use the 1/4-20 foot and combine with our Unified Baseplate (Sony FS7mkII, FX9) using the vertical support hole and the Unified Lens Adapter Support Kit. PL Cap included to prevent dust from entering sensor area when lens is not attached.If you are using the E-Mount to PL Mount Pro without a camera cage, you can use the included WC Lens Adapter Universal Support Foot to attach directly to the bottom of your camera and lens mount. This allows all the weight to be transferred from the lens mount to the bottom of the camera to avoid any flexing or damage that could occur when using heavier lenses.
In our factory, we set the flange focus using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity.
Includes
2 M4x20mm socket cap screw1 1/4-20 Support Foot1 Universal Support Foot
Specifications
Weight: 251g Dimensions: 85.1 mm x 81.8 mm x 48 mm
Features
- 1/4-20 foot for attaching tripod plate or support
Shim setstackable to achieve necessary thickness)
Silver .0127mm (0.0005")Amber .0254mm (0.001")Purple .0381mm (0.0015")Red .0508mm (0.002")Green .0762mm (0.003")Tan .1016mm (0.004")Blue .127mm (0.005")
Compatibility
This adapter will also work with any Sony E-Mount camera like the below:Sony FS7Sony FS7mkIISony FS5Sony FX9Sony A7s, A7sII, A7r, A7rII, A6300Sony FS700Sony FS100Many more!
Chrosziel MA-EPL-HR12
The Chrosziel Meta Mount is a Sony E camera to PL lens “hot mount” adapter with metadata communication. Each mount has the required pin contacts necessary to transmit lens metadata through to the camera and conversely the contacts provide lens control through a 12-pin Hirose out connection to an ENG lens.
When the Meta Mount is used with cine lenses with LDS or Cooke/i Data the metadata such as iris setting, focus distance and zoom focal length are transmitted through the adapter and appear in the viewfinder, on the monitor and are recorded in the video file for use in post processing.
When the Meta Mount is used with an ENG servo motor-controlled broadcast lens the Focus/Iris/Zoom servo’s can be controlled through the camera and are compatible with the Sony FX9 / FX6 / FX3 hand grips, RCP or camera’s web GUI. This allows for easy and full control of an ENG broadcast lens through a Sony E mount camera. The Meta Mount is shimmable with the included shim set for the E-mount.
Key Features
Sony E Mount Camera to PL mount LensElectronic contacts for metadata communication and lens controlLens metadata displayed in camera and recorded to fileShimmable E MountFull focus/Iris/Zoom control on servo motor ENG lenses
Technical data
E Mount camera to PL mount lensContact and electronics for Metadata communication12-pin Hirose out for ENG lens control3/8th lens support socketUSB Type min A-B (for firmware updates only)Power supply 10-16V (Lemo compatible 0B 5-pin)Power consumption max. ca. 350mAh @ 12V
In the box
1x Meta Mount E-to-PL adapter (MA-EPL-HR12)1x MN-AB (power supply cable 12 Volt A/B D-Tap – 0B 5-pin Lemo)1x F55-A2-P-CAM1x Shim Set, E-Mount side1x USB Mini Adapter
8Sinn E-Mount to PL Lens Mount Adapter
SKU: 8-E-PL-ADAPTER
8Sinn E-Mount to PL Lens Mount Adapter mounts PL-Mount lenses on Sony E-Mount Cameras and has following features:
0,005mm accuracy Infinity focusingAluminum alloyBlack anodizedMade in EUWeight ( without PL cap) - only 160g
Compatible with
FS7, FS7 II FS5, FS5 II FX3, FX6, FX9 FS100, FS700 Venice, Venice 2 EA50E VG900 α7, α7 II, α7 III, α7 IV α7 R, α7 R II, α7 R III, α7 R IV α7 S, α7 S II, α7 S III, α7 S IV α9, α9 II A6300, A5100, A5000, A6000, A3000 NEX-5, NEX-6, NEX-3, NEX-7
Set includes:1 x 8Sinn E-Mount to PL Lens Mount Adapter
Wooden Camera E-Mount to PL Mount Pro (FS7)
SKU: 194000
E-Mount to PL Adapter Pro (FS7) is a shimmable Sony E-Mount to PL mount adapter that enables mounting of all PL mount lenses onto the Sony PXW-FS7 camera. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Mount includes a support ring that integrates with the Top Plate (FS7), a highly recommended addition to this system. Loosen the support ring thumbscrew to quickly remove the mount and install another adapter. This adapter will also work with any E-Mount camera like the A7, A7r, A7s, A7 II, FS100, FS700, NEX-5, NEX-6, NEX-7, etc, however, the support ring would not be utilized.
Support ring capable of integrating with Top Plate (FS7)
2 x 1/4-20x1/2" socket cap screws
Shim set (stackable to achieve necessary thickness)
Silver.0127mm (0.0005")Amber.0254mm (0.001")Purple.0381mm (0.0015")Red.0508mm (0.002")Green.0762mm (0.003")Tan.1016mm (0.004")Blue.127mm (0.005")
Specifications
Weight 408 gDimensions 101.60 mm x 101.60 mm x 76.20 mm
Vocas Sony E-mount to PL adapter including 15mm support
SKU: 0900-0023
Sony E-mount adapter including 15mm support. This adapter allows the use of PL type lenses on cameras that use a Sony E-mount lens mount, such as the Sony NEX-FS100. Includes
1 x Vocas Sony E-Mount to PL Lens Mount Adapter 1 x Vocas Separate 15mm support for PL adapter
€550.00*
gross: €654.50
Pay with:
We ship with:
Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Hotline +49 211 930 730-33
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Machine identifier:
Security token to identify the machine.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
stripe-payments.stripe_pm.name:
stripe-payments.stripe_pm.description
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
stripe-payments.stripe_pm.name:
stripe-payments.stripe_pm.description
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
stripe-payments.stripe_pm.name:
stripe-payments.stripe_pm.description
Google Pay payments
Amazon Pay
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
PayPal payments
CAPTCHA integration
Timezone:
The cookie is used to provide the system with the user's current time zone.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Amazon Pay:
The cookie is used for payment transactions via Amazon.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Sendinblue:
Sendinblue tracker
Allows Google to collect personal data for online advertising and marketing.
Google Advertising
Google Advertising
Google Advertising
Service cookies are used to provide the user with additional offers (e.g. live chats) on the website. Information obtained via these service cookies may also be processed for site analysis.
Doofinder:
The cookie is used to track user interaction with the site search. The data can be used to optimize the search function.
YouTube video
YouTube video
YouTube video
Wishlist
Local Storage:
Stores a timestamp to hide elements for a certain time if desired.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Marketing cookies are used by third-party vendors or publishers to display personalized advertisements. They do this by tracking visitors across websites.
Google Ads:
Dieses Cookie wird gesetzt, wenn ein User über einen Klick auf eine Google Werbeanzeige auf die Website gelangt. Es enthält Informationen darüber, welche Werbeanzeige geklickt wurde, sodass erzielte Erfolge wie z.B. Bestellungen oder Kontaktanfragen der Anzeige zugewiesen werden können.
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Bing Ads:
This cookie is used by Bing to gather anonymous information on how visitors are using the website.
Cookies used for statistics and shop performance metrics.
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.