Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Hotline +49 211 930 730-33
Go to homepage
Wishlist
Shopping cart €0.00*

Wooden Camera Battery Slide Pro (Canon EOS C70/C80) 288500

€407.00*

gross: €484.33

Prices excl. VAT plus shipping costs

Battary Mount
Product number: SW28295.1

Wooden Camera Battery Slide Pro (Canon EOS C70/C80)

Custom WC Gold Mount or V-Mount Pro battery plate for providing external power to the Canon EOS C70 and Canon EOS C80 cameras. Features 3x D-Tap ports for accessory power, including a digital fuse which cuts off accessory outputs while leaving the camera powered.

Battery Slide Pro (Canon EOS C70/ C80) can be attached to any standard Canon Accessory Mount by aligning the interlocking ridges and turning the attachment thumbwheel to tighten a 1/4”-20 screw; rods are not required. This system retains access to the original C70 battery compartment, enabling operators to hot-swap power between both BPU and brick batteries. To adjust the battery plate’s vertical position, loosen the pivoting clamp and slide the plate up or down.

Compatible with

  • Canon EOS C70
  • Canon EOS C80
  • Wooden Camera Top Plate (Canon C70)
  • Wooden Camera Mini Top Handle (Canon C70)
  • Top Plate for Canon EOS C80
  • ARCA Riser Plate for Canon EOS C80
  • and more

TOP-Handles - Camera cages - Camera plates - Camera brackets  -  Matte box - Battery plates - Power cables

Products from american producer Wooden Camera that offers useful solution for your video-audio equipment. The range of product concenrs

 

Related links of the manufacturer

Similar products

Wooden Camera Battery Slide Pro (Canon C300mkIII, C400, C500mkII) 282200
Wooden Camera Battery Slide Pro (Canon C300mkIII, C400, C500mkII) 282200
Battary Mount: GOLD-Mount
Battery Slide Pro (Canon C300mkIII, C400, C500mkII) Battery Slide Pro (Canon C300mkIII, C400, C500mkII) utilizes a WC Pro Gold Mount or V-Mount plate and provides battery voltage to the camera through a 4pin XLR connector. Features a custom Battery Slide which attaches directly to the back of the camera without rods. This system retains access to the battery compartment and allows an internal BPU battery to be installed, giving the user the ability to hot swap batteries. To adjust battery plate position, loosen the thumbscrew and slide. DC Input on camera-right side can be used for hot-swapping between block battery and on-board battery.Features 3x D-Tap ports at battery voltage for accessory power and digital fuse which cuts off accessory outputs while leaving the camera powered.SpecificationsWeight: 349.27 gDimensions: 152.4 x 101.6 x 44.4 mm

€410.00*
gross: €487.90
Wooden Camera Battery Slide Pro (Canon C300mkIII, C400, C500mkII) 282300
Wooden Camera Battery Slide Pro (Canon C300mkIII, C400, C500mkII) 282300
Battary Mount: V-Mount
Battery Slide Pro (Canon C300mkIII, C400, C500mkII) Battery Slide Pro (Canon C300mkIII, C400, C500mkII) utilizes a WC Pro Gold Mount or V-Mount plate and provides battery voltage to the camera through a 4pin XLR connector. Features a custom Battery Slide which attaches directly to the back of the camera without rods. This system retains access to the battery compartment and allows an internal BPU battery to be installed, giving the user the ability to hot swap batteries. To adjust battery plate position, loosen the thumbscrew and slide. DC Input on camera-right side can be used for hot-swapping between block battery and on-board battery.Features 3x D-Tap ports at battery voltage for accessory power and digital fuse which cuts off accessory outputs while leaving the camera powered.SpecificationsWeight: 349.27 gDimensions: 152.4 x 101.6 x 44.4 mm

€410.00*
gross: €487.90
Tip
Wooden Camera Battery Slide Pro V-Mount RED KOMODO
Wooden Camera Battery Slide Pro V-Mount (RED KOMODO)
Wooden Camera Battery Slide Pro V-Mount (RED KOMODO) SKU: 280300 Battery Slide Pro V-Mount ttaches to the camera-left, BP-9 battery slot and powers the camera using a right angle LEMO compatible connector. Thumbscrew can be loosened to tilt and slide the plate as needed. Three D-Taps on the plate provide battery voltage for accessories and power is monitored for over-current. If more than 5.8A are used by accessories, a digital fuse will trip and the red LED will illuminate but the camera will remain powered. Reset button can be pressed once to restart accessory power. DC Input on camera-right side can be used for hot-swapping between block battery and on-board battery. While the AC adapter that comes with the KOMODO can be used, please note that it may not be powerful enough to sustain the camera and accessory draw. If hot-swapping between Gold Mount battery and BP-955 battery is desired, please consider Battery Slide Extension for Canon BP-955 Hot Swap (RED KOMODO) which moves the battery plate further back from the camera body. Weight: 264 gDimensions: 127 mm x 114.3 mm x 44.45 mm

€335.00*
gross: €398.65
Free shipping
Wooden Camera Battery Slide Pro V-Mount Sony FX9
Wooden Camera Battery Slide Pro V-Mount (Sony FX9)
Wooden Camera Battery Slide Pro V-Mount (Sony FX9) SKU: 275900 Battery Slide Pro V-Mount (Sony FX9) utilizes a WC Pro V-Mount plate which converts battery voltage to 19.5V for the camera, FX9 barrel connector, and a custom Battery Slide which attaches directly to the back of the Sony FX9 camera without rods. This system retains access to the battery compartment and allows an internal BPU battery to be installed, giving the user the ability to hot swap V-Mount batteries. To adjust battery plate position, loosen the thumbscrew and slide.  Perfectly fits rear profile of the Sony FX9 for compact packing in camera case.Features 3x D-Tap ports at battery voltage for accessory power and digital fuse which cuts off accessory outputs while leaving the camera poweredWeight: 349.27 g Dimensions: 76.2 mm x 44.45 mm x 177.8 mm

€410.00*
gross: €487.90
Free shipping
Wooden Camera Micro Battery Slide Pro (Blackmagic Pocket Cinema Camera 4K / 6K / 6K G2 / 6K Pro, V-Mount)
Wooden Camera Micro Battery Slide Pro (Blackmagic Pocket Cinema Camera 4K / 6K / 6K G2 / 6K Pro, V-Mount)
Wooden Camera Micro Battery Slide Pro Micro Battery Slide Pro (Blackmagic Pocket Cinema Camera 4K / 6K / 6K G2 / 6K Pro, V-Mount) utilizes an Anton/Bauer micro battery plate which provides unregulated 14v to a 2-Pin connector for camera power. The 2-Pin connector is compatible with both Blackmagic Pocket Cinema Camera 6K Pro and Blackmagic Pocket Cinema Camera 4K / 6K / 6K G2 cameras.The plate attaches via two 15mm rods and position can be adjusted along the battery slide. The user retains the ability to hot swap between the onboard Sony NPF-Series and external cinema battery. The Micro Battery Slide Pro is compatible with both micro and full-sized cinema batteries. It also features 2x D-Tap (5.8 Amps) port for accessory power as well as a digital fuse which cuts off accessory outputs, should the user exceed the set current for accessories, while leaving the camera powered.Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. Weight: 315 gDimensions: 145 x 115 x 40 mm

€360.00*
gross: €428.40
Pay with:
We ship with:
Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Hotline +49 211 930 730-33