Wooden Camera C-Box (Converter, V-Mount)

Wooden Camera C-Box Converter Gold Mount SKU: 176400 C-Box (Converter, Gold Mount) accepts HDMI and 3G HD-SDI input, selectable via a switch on the operator's side, and simultaneously outputs three channels of HD-SDI and two of HDMI. The device draws power internally from the male Gold Mount plate attached and passes power through to the camera via the female Gold Mount plate on the other side. The male Gold Mount plate has an additional D-Tap output for accessory power. Each HD-SDI output is independently reclocked and carries the same strength as the original signal. LED indicators are located on the operator's side to show status of power and signal. 5V Mini USB port on operator's side for powering wireless transmitters like Paralinx, IDX Cam-Wave, etc. This version of Wooden Camera C-Box attaches between any Anton Bauer QRC size Gold Mount plate and Gold Mount battery. For example, the C-Box (Converter, Gold Mount) can fit between an Anton Bauer Dionic HC battery and the QB Anton Bauer (QRC-EPIC). Overview Power input via Gold Mount battery, 12-24 VDC .5AAttaches between standard Gold Mount battery and camera Gold Mount plateLED indicator for Signal and Power on operator side5V mini USB output for accessory power1/4-20 holes on bottom allow for attachment of rod clamps, cheeseplates, and other accessoriesRe-clocks standard SD, HD and 3G SDI data ratesAuto bypasses non-standard SDI rates from 20Mbit/s to 3Gbit/sPasses SDI embedded audio and ancillary dataOperating Temperature 0 to +40 COperating Humidity 0 to 90% Non-Condensing Signal Information Data Types SMPTE 259/292/424Data Types 19 Mbit/s through 3.0 Gbit/sRe-clocking Data Rates 270 Mbit/s, 1.485 Gbit/s, 2.97 Gbit/sInput/Output Return Loss > 15dB @ HD, > 12dB @ 3GInput Level 800 mV P-P +/- 20%Input Impedance 75 Ohms +/- 1%Output Level 800 mV P-P +/- 5%Output Impedance 75 Ohms +/- 1%Output Jitter< 0.2 UI

Wooden Camera C-Box (Converter, D-Tap) SKU: 176200 C-Box (Converter, D-Tap) accepts HDMI and 3G HD-SDI input, selectable via switch on operator's side, and outputs simultaneously three channels of HD-SDI and two of HDMI. The device draws power from the D-Tap of a battery or battery plate using the included cable. Each video output is independently reclocked and carries the same signal strength as the original. LED indicators are located on the operator's side to show status of power and signal. This version attaches between any V-Mount or QRC-style Gold Mount and wherever the plate was attached previously. For example, the Wooden Camera C-Box (Converter, D-Tap) can fit between the WC V-Mount (Epic/Scarlet) and the Quick Back v2. Another example would be attaching it between the WC Gold Mount (BMC) and the Battery Slide. C-Box Overview Power Input 4 pin mini-XLR, 12-24 VDC .5AIncluded 4" D-Tap to 4 pin mini-XLR cableLED indicator for Signal and Power on operator sideBolts to standard V-Mount, QRC-style Gold Mount, and RED/Blueshape mounting patternsStandard V-Mount, QRC-style Gold Mount, and RED/Blueshape plates can be bolted to the box itself1/4-20 holes on bottom allow for attachment of rod clamps, cheeseplates, and other accessoriesRe-clocks standard SD, HD and 3G SDI data ratesAuto bypasses non-standard SDI rates from 20Mbit/s to 3Gbit/sPasses SDI embedded audio and ancillary dataOperating Temperature 0 to +40 COperating Humidity 0 to 90% Non-Condensing Signal Information Data Types: SMPTE 259/292/424Data Rates: 19 Mbit/s through 3.0 Gbit/sRe-clocking Data Rates: 270 Mbit/s, 1.485 Gbit/s, 2.97 Gbit/sInput/Output Return Loss: > 15dB @ HD, > 12dB @ 3GInput Level: 800 mV P-P +/- 20%Input Impedance: 75 Ohms +/- 1%Output Level: 800 mV P-P +/- 5%Output Impedance: 75 Ohms +/- 1%Output Jitter: < 0.2 UI Other Notes A/C Adapter included2 positions available for mounting QRC-style power plates: high and lowHole pattern available for mounting common accessory V mount4 pin mini-XLR power connector same as TV Logic/Alphatron