Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Hotline +49 211 930 730-33
Go to homepage
Wishlist
Shopping cart €0.00*

Wooden Camera D-Box (RED DSMC2, Power Distribution Portion Only)

Free shipping
Wooden Camera D-Box Weapon Power Distribution
D-Box Weapon Power Distribution
Wooden Camera D-Box Weapon Power Distribution
D-Box Weapon Power Distribution

€640.00*

gross: €761.60

Prices excl. VAT plus shipping costs

Free shipping

No longer available

Product number: SW19409

Wooden Camera D-Box (RED DSMC2, Power Distribution Portion Only)

SKU: 235000

Wooden Camera D-Box (Weapon, Power Distribution Portion Only) is for owners of Cable-less V-Mount, Blueshape, of Gold Mount that want to add power distribution, standardized remote start/stop, and hot swap abilities to their RED DSMC2 camera. The completed Wooden Camera D-Box assembly is tool-less for installation and utilizes our Cable-less interface which attaches directly to the back of the camera body, Base Expander Module, REDVolt Expander Module, and the OffHollywood O-Mods.

Connectors on the D-Box are contoured to match the Expander Modules' which allow for all cables to be installed with no collisions. The module communicates with the camera and allows any ARRI standard start/stop trigger to be used with the 3pin Fischer port. The DC input on the D-Box is the same as the camera's LEMO allowing for an AC power supply or external power plate to be connected to power accessories and camera during a battery change. When both battery and DC input are utilized, the D-Box defaults to the DC input, leaving the battery fully charged.

When combined with V-Mount or Gold Mount plate, one D-Tap is obscured by the right side power outputs. Inside the D-Box is a 10A fuse and replacement fuses are included.

  • Weight: 362.8 g
  • Dimensions: 228.6 x 177.8 x 127 mm

D-Box Connections

  • 1. D-Tap - 12V Unregulated - This slot can be swapped for Hirose, 2pin LEMO, or 4pin LEMO
  • 2. D-Tap - 12V Unregulated - This slot can be swapped for Hirose, 2pin LEMO, or 4pin LEMO
  • 3. 2 pin LEMO - 12V Unregulated - ARRI standard wiring
  • 4. 2 pin LEMO - 12V Unregulated - ARRI standard wiring
  • 5. 3 pin Fischer - 24V Regulated
  • - Regulator built in to convert battery voltage to 24V
  • - Maximum 3A shared between the two 3pin Fischers
  • - ARRI standard start/stop capabilities
  • 6. 3 pin Fischer - 24V Regulated
  • - Regulator built in to convert battery voltage to 24V
  • - Maximum 3A shared between the two 3pin Fischers
  • - ARRI standard start/stop capabilities
  • 7. USB - 5v Regulated - Provides 2A for iPhone/iPad charging
  • 8. DC Input - 12-16V
  • - DC input on the D-Box is the same as the camera's LEMO
  • - Priority is given to DC Input to preserve battery charge when both sources connected

TOP-Handles - Camera cages - Camera plates - Camera brackets  -  Matte box - Battery plates - Power cables

Products from american producer Wooden Camera that offers useful solution for your video-audio equipment. The range of product concenrs

 

Related links of the manufacturer

Accessory Items

Free shipping
Wooden Camera D-Box RED V-Mount
Wooden Camera D-Box (RED DSMC2, V-Mount)
Wooden Camera D-Box (RED DSMC2, V-Mount) SKU: 233900 Wooden Camera D-Box (Weapon/Epic-W/Scarlet-W/Raven, V-Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the RED DSMC2 cameras. The D-Box is completely tool-less for installation and utilizes our Cable-less interface which attaches directly to the back of the camera body, Base Expander Module, REDVolt Expander Module, and the OffHollywood O-Mods. Connectors on the -Box (Weapon/Epic-W/Scarlet-W/Raven, V-Mount) are contoured to match the Expander Modules' which allow for all cables to be installed with no collisions. The module communicates with the camera and allows any ARRI standard start/stop trigger to be used with the 3pin Fischer port. The DC input on the D-Box is the same as the camera's LEMO allowing for an AC power supply or external power plate to be connected to power accessories and camera during a battery change. When both battery and DC input are utilized, the D-Box defaults to the DC input, leaving the battery fully charged. Authentic IDX V-Mount plate provides 2x D-Tap (unregulated) on the power plate itself but we should note that one D-Tap is obscured by the right side power outputs. Inside the D-Box is a 10A fuse and replacement fuses are included. Weight: 610gDimensions: 228.6 mm x 177.8 mm x 127 mm D-Box Connections 1. D-Tap - 12V Unregulated - This slot can be swapped for Hirose, 2pin LEMO, or 4pin LEMO2. D-Tap - 12V Unregulated - This slot can be swapped for Hirose, 2pin LEMO, or 4pin LEMO3. 2 pin LEMO - 12V Unregulated - ARRI standard wiring4. 2 pin LEMO - 12V Unregulated - ARRI standard wiring5. 3 pin Fischer - 24V Regulated- Regulator built in to convert battery voltage to 24V- Maximum 3A shared between the two 3pin Fischers- ARRI standard start/stop capabilities6. 3 pin Fischer - 24V Regulated- Regulator built in to convert battery voltage to 24V- Maximum 3A shared between the two 3pin Fischers- ARRI standard start/stop capabilities7. USB - 5v Regulated - Provides 2A for iPhone/iPad charging8. DC Input - 12-16V- DC input on the D-Box is the same as the camera's LEMO- Priority is given to DC Input to preserve battery charge when both sources connected

€1,150.00*
gross: €1,368.50
Free shipping
Wooden Camera D-Box RED Gold Mount
Wooden Camera D-Box (RED DSMC2, Gold Mount)
Wooden Camera D-Box (RED DSMC2, Gold Mount) SKU: 234000 Wooden Camera D-Box (Weapon/Epic-W/Scarlet-W/Raven, Gold Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the RED DSMC2 cameras. The D-Box is completely tool-less for installation and utilizes our Cable-less interface which attaches directly to the back of the camera body, Base Expander Module, REDVolt Expander Module, and the OffHollywood O-Mods. Connectors on the D-Box (Weapon/Epic-W/Scarlet-W/Raven, Gold Mount) are contoured to match the Expander Modules' which allow for all cables to be installed with no collisions. The module communicates with the camera and allows any ARRI standard start/stop trigger to be used with the 3pin Fischer port. The DC input on the D-Box is the same as the camera's LEMO allowing for an AC power supply or external power plate to be connected to power accessories and camera during a battery change. When both battery and DC input are utilized, the Wooden Camera D-Box defaults to the DC input, leaving the battery fully charged. Authentic Anton Bauer Gold Mount plate provides 2x D-Tap (unregulated) on the power plate itself but we should note that one D-Tap is obscured by the right side power outputs. Inside the D-Box is a 10A fuse and replacement fuses are included. Weight: 610g Dimensions: 228.6 mm x 177.8 mm x 127 mm D-Box Connections 1. D-Tap - 12V Unregulated - This slot can be swapped for Hirose, 2pin LEMO, or 4pin LEMO2. D-Tap - 12V Unregulated - This slot can be swapped for Hirose, 2pin LEMO, or 4pin LEMO3. 2 pin LEMO - 12V Unregulated - ARRI standard wiring4. 2 pin LEMO - 12V Unregulated - ARRI standard wiring5. 3 pin Fischer - 24V Regulated- Regulator built in to convert battery voltage to 24V- Maximum 3A shared between the two 3pin Fischers- ARRI standard start/stop capabilities6. 3 pin Fischer - 24V Regulated- Regulator built in to convert battery voltage to 24V- Maximum 3A shared between the two 3pin Fischers- ARRI standard start/stop capabilities7. USB - 5v Regulated - Provides 2A for iPhone/iPad charging8. DC Input - 12-16V- DC input on the D-Box is the same as the camera's LEMO- Priority is given to DC Input to preserve battery charge when both sources connected

€1,150.00*
gross: €1,368.50

Similar products

Free shipping
wooden camera easy top weapon
Wooden Camera Easy Top (RED DSMC2)
Wooden Camera Easy Top (RED DSMC2) SKU: 213900 Wooden Camera Top plate for RED Weapon Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. Attaches to top of camera by 4 x 1/4-20 captured screws. Two LCD/EVF interfaces are included. One is located under the front portion of the top plate and one is included via the tethered side attachment. Both convert the LCD/EVF pogo pins to the standard 16pin LEMOs which are found on the right side of the top plate. These LEMOs are specially manufactured to allow users to select the orientation in increments of 45 degrees. A third interface is located underneath the center of the top plate and communicates with the start/stop trigger on top of the camera. A board inside the top plate converts the non standard interface to an ARRI standard 3pin Fischer. Any ARRI standard trigger can be used with the camera and no power trigger is required. Includes 4 x 1/4-20 x captured screws

€530.00*
gross: €630.70
Simple 3pin Fischer Trigger Cable
Wooden Camera Simple 3pin Fischer Trigger Cable (120")
Wooden Camera Simple 3pin Fischer Trigger Cable SKU: 229800 Simple 3pin Fischer Trigger Cable (120") connects to any ARRI standard 3pin Fischer port containing with start/stop capability like D-Box (Alexa Mini) and D-Box (C300mkII) and triggers the camera via the red button on the end. Power is not required for use and cable length is 3 meters.

€120.00*
gross: €142.80
Free shipping
Wooden Camera Trigger Handle RED Weapon Scarlet-W Raven
Wooden Camera Trigger Handle (RED Weapon / Scarlet-W / Raven)
Wooden Camera Trigger Handle (RED Weapon / Scarlet-W / Raven) SKU: 228000 Trigger Handle for RED Weapon, Scarlet Weapon, Raven cameras attaches without tools directly to the top of the camera brain or to the Easy Top (Weapon/Scarlet-W/Raven) to trigger the camera through the pogo interface. Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. Attaches to top of camera by (2) 1/4-20 captured thumbscrews. Additionally, Rod Clamps can be attached to the front for a pass through top rod system. Includes 2 x 1/4-20 x captured thumbscrews

€320.00*
gross: €380.80
Free shipping
Wooden Camera 220600
Wooden Camera Cable-less V-Mount (Weapon / Epic-W / Scarlet-W / Raven)
Wooden Camera Cable-less V-Mount (Weapon/Epic-W/Scarlet-W/Raven) SKU: 220600 Wooden Camera Cable-less V-Mount for the RED Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), and Raven cameras which utilizes an IDX brand plate with two D-Taps and the Wooden Camera pogo interface module. The assembly will attach without tools directly to the back of the RED Weapon / RED Scarlet-W / RED Epic-W / RED Raven camera, Base Expander Module, REDVolt Expander Module, and some third party modules like OMODs. This system can be converted between high and low modes. High mode is where the battery plate sits above the back of the camera. Low mode is where the plate is configured to be flush with the top of the camera body leaving batteries in a very compact configuration. An important note is that the RED DSMC2 top handle will clear RED Brick batteries when our Cable-less V-Mount plate is configured in low mode. The Cable-less V-Mount will communicate percentage or voltage data to the camera's LCD display. Intelligent batteries like RED Bricks, Blueshape, Switronix, PAG, and other batteries utilizing SMBUS or reversed SMBUS will allow for the module to communicate percentage data and estimated run time. Non-SMBUS batteries like some IDX and other low cost batteries will only provide voltage data to the camera through our module. 2x D-Tap ports for accessory power Weight: 453.592 gDimensions: 142mm x 85mm x 33mm

€590.00*
gross: €702.10
Pay with:
We ship with:
Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Hotline +49 211 930 730-33