Wooden Camera Rod Clamp (15mm LW)

€98.00*

gross: €116.62

Prices excl. VAT plus shipping costs

Available, delivery time: 1 day

Product number: SW12508

Wooden Camera Rod Clamp (15mm LW)

SKU: 150200

Rod Clamp (15mm LW) can attach to existing 15mm rods to provide 1/4-20 mounting points. It can also be turned over and bolted to cheeseplates, cages, battery plates, and more. Extremely versatile, compact, and lightweight.

Includes

2 x 1/4-20 x 1/4" screws
2 x 1/4-20 x 3/4" screws

Technical data

Weight: 90 g
Dimensions: 11,17 cm x 2,54 cm x 1,52 cm

TOP-Handles - Camera cages - Camera plates - Camera brackets - Matte box - Battery plates - Power cables

Products from american producer Wooden Camera that offers useful solution for your video-audio equipment. The range of product concenrs

Similar products

Free shipping

Wooden Camera D-Box (Alexa Mini, V-Mount)

Wooden Camera D-Box (Alexa Mini, V-Mount) SKU: 209200 D-Box (Alexa Mini, V-Mount) is a custom version of the popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the ARRI Alexa Mini. Two 16 inch (40cm) cables exit the power plate with one going to the 8pin LEMO power plug and the other going to the 7pin EXT port. The bottom of the D-Box has (3) 1/4-20 holes which can attach directly to our Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). For an adjustable mount system, use the Battery Slide paired with the same Rod Clamps listed above. This product Wooden Camera D-Box will attach to the ARRI BAP-1 and instructions on how to do this are included in the box. Authentic IDX V-Mount plate provides 2x D-Tap (unregulated) and is hard wired to the D-Box. Inside the D-Box is a 10A fuse. D-Box Slots Included 7 pin LEMO - EXT PortReplica of connector on rear of cameraMaintains functionality of external communication, R/S, and powerNote this slot is not swappable2 pin LEMO - 12V UnregulatedARRI standard wiringThis slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)2 pin LEMO - 12V UnregulatedARRI standard wiringThis slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)3 pin Fischer - 24V RegulatedRegulator built in to convert battery voltage to 24VMaximum 3A shared between slot 4/5Note this slot is not swappable3 pin Fischer - 24V RegulatedRegulator built in to convert battery voltage to 24VMaximum 3A shared between slot 4/5Note this slot is not swappable4 pin Mini XLR - 12V InputHot swappable power input with included 7 inch pigtail cable for standard 4 pin XLR (12V nominal)Capable of providing power to accessories and camera with out brick battery attachedNote this slot is not swappable Specifications Weigh t534 gDimensions 90 mm x 146 mm x 43mm

€1,050.00*

gross: €1,249.50

Free shipping

Wooden Camera WC Gold Mount (C300mkII, C200, C200B)

Wooden Camera WC Gold Mount (C300mkII) SKU: 214800 Wooden Camera brand Gold Mount utilizing an authentic Anton Bauer plate and Canon C300mkII LEMO connector. 12" cable exits the right side of the plate allowing easy insertion into the camera. Includes 1x D-Tap port for accessory power To mount the WC Gold Mount onto the C300mkII, the below combination is recommended Fixed Base (C100, C300, C500) - baseplate that holds 15mm lightweight rods at correct lens heightBattery Slide - an adjustable battery mounting plate that attaches a V-Mount or Gold Mount plate to Rod ClampsRod Clamp (15mm LW) - mounts Battery Slide to two 15mm lightweight rods WC Gold Mount (C300mkII) Specifications Weight 227gDimensions 143.2 mm x 92 mm x 21.9 mm

€210.00*

gross: €249.90

Details

Free shipping

Wooden Camera WC V-Mount (C100, C300, C500)

Wooden Camera WC V-Mount (C100, C300, C500) SKU: 177000 Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and C-Series DC connector. Works with Canon C100Canon C300Canon C500 Voltage regulator integrated in the plate provides constant 8.4V to camera. 2x D-Taps on plate provide 12-16V depending on battery connected Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). Weight 178 gDimensions 142.4 mm x 90.8 mm x 21.3 mmLength 40cm

€275.00*

gross: €327.25

Details

Free shipping

Wooden Camera WC V-Mount (Sony FS7, FS5, Panasonic EVA-1)

Wooden Camera WC V-Mount (Sony FS7, FS5, Panasonic EVA-1) SKU: 194200 Wooden Camera WC V-Mount (Sony FS5, FS7) utilizing an IDX V-Mount and Sony PXW-FS7 DC connector. This model also works with Sony EX3 cameras. Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). 2x D-Tap ports for accessory powerCable length: 380mmWeight: 187gDimensions: 142.6 mm x 92.1 mm x 21.9 mm

€180.00*

gross: €214.20

Details

Free shipping

Wooden Camera D-Box Plus (ARRI Alexa Mini, V-Mount)

Wooden Camera D-Box Plus (ARRI Alexa Mini, V-Mount) SKU: 253700 Wooden Camera D-Box Plus (ARRI Alexa Mini, V-Mount) is an improvement on the very popular D-Box Alexa Mini. D-Box Plus (ARRI Alexa Mini, V-Mount) interfaces with the camera's Power, EXT, and SDI ports . The DC input is now a full size 4pin XLR connector and is prioritized to be used first, leaving the onboard battery fully charged.Physical fuses have been replaced by a processor controlled amp limit which is settable to 3.8, 5.8, or 9 amps using the slide switch on the operator's side. Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again.The "DC IN" and "BATT" LEDs are dual LEDs. This means the LED If battery voltage is above 12.5V the LED will be green. If the battery voltage is below 12V the LED will be red. If the battery voltage is between those values the LED will be orange (red + green). Flashing may occur during phase transition. Highest quality Anton Bauer components are used in the V-Mount assembly and the unibody power plate design is both extremely durable and lightweight. Interfaces 1 x V-Mount Power Plate3 x HD-SDI outputs2 x HDMI outputs2 x 3pin Fischer at 24V with Run Stop- Regulator built in to convert battery voltage to 24V- Maximum 3A surge, 2.5A sustained shared between connectors2 x 2pin LEMO at 12V unregulated- ARRI standard wiring2 x D-Tap at 12V unregulated1 x 5V USB1 x EXT port- Replica of connector on rear of camera - Maintains functionality of external communication for Starlite monitor, R/S, and power1 x 4pin XLR DC Input - Hot swappable with on board battery- Capable of providing power to accessories and camera without brick battery attached Cables to Camera 1x 8pin LEMO compatible cable (16 inches)1x 7pin LEMO compatible cable (16 inches)1x HD-SDI cable (16 inches) The bottom of the D-Box has (2) 1/4-20 holes which can attach directly to our Battery Swing Bracket Only (for D-Box Plus),Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). For an adjustable mount system use the Battery Slide. This product will attach to the ARRI BAP-1 and instructions on how to do this are included in the box.Connectors used in this assembly are not manufactured by LEMO but are made to the same specifications and are LEMO compatible Specifications Weight: 640 gramsDimensions: 114.4 x 146 x 43mm

€1,800.00*

gross: €2,142.00

Details

Genus Support Bar 200mm pair - 15mm rods GMB-200

Genus Support Bar 200mm pair 15mm rods GMB-200 Support Bar (200mm) fits 15mm diameter support brackets. The inner threaded core allows for attachment of extension bars. Suitable for supporting camera matte box, follow focus system or other accessories.

€35.00*

gross: €41.65

Wooden Camera WC Pro V-Mount (Blackmagic Pocket 4K / 6K / 6K G2 / 6K Pro)

Wooden Camera WC Pro V-Mount BMPCC4K SKU: 265500 WC Pro V-Mount (Blackmagic Pocket Cinema Camera 4K, BMPCC4K) is a metal power plate, created in partnership with Anton Bauer, and has a rugged aluminum body for durability and secure battery mounting and a DC connector compatible with the Blackmagic Pocket Cinema Camera 4K. Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws. Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). Weight: 187gDimensions: 142.6 mm x 92.1 mm x 21.9 mmCable length: 406.4mm

€250.00*

gross: €297.50

Free shipping

Wooden Camera D-Box (Alexa Mini, Gold Mount)

Wooden Camera D-Box (Alexa Mini, Gold Mount) SKU: 209100 D-Box (Alexa Mini, Gold Mount) is a custom version of popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the ARRI Alexa Mini. Two 16 inch (40cm) cables exit the power plate with one going to the 8pin LEMO power plug and the other going to the 7pin EXT port. The bottom of the D-Box has (3) 1/4-20 holes which can attach directly to Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). For an adjustable mount system, use the Battery Slide paired with the same Rod Clamps listed above. Wooden Camera D-Boxwill attach to the ARRI BAP-1 and instructions on how to do this are included in the box. Authentic Anton Bauer plate provides 1x D-Tap (unregulated) and is hard wired to the D-Box. D-Box Slots Included 7 pin LEMO - EXT PortReplica of connector on rear of cameraMaintains functionality of external communication, R/S, and powerNote this slot is not swappable2 pin LEMO - 12V UnregulatedARRI standard wiringThis slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)2 pin LEMO - 12V UnregulatedARRI standard wiringThis slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)3 pin Fischer - 24V RegulatedRegulator built in to convert battery voltage to 24VMaximum 3A shared between slot 4/5Note this slot is not swappable3 pin Fischer - 24V RegulatedRegulator built in to convert battery voltage to 24VMaximum 3A shared between slot 4/5Note this slot is not swappable4 pin Mini XLR - 12V InputHot swappable power input with included 7 inch pigtail cable for standard 4 pin XLR (12V nominal)Capable of providing power to accessories and camera with out brick battery attachedNote this slot is not swappable Specifications Weight 534 gDimensions 90 mm x 146 mm x 43mm

€1,050.00*

gross: €1,249.50

Wooden Camera WC V-Mount (C300mkII,C200, C200B)

Wooden Camera WC V-Mount (C300mkII) SKU: 214700 Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and Canon C300mkII LEMO connector. 12" cable exits the right side of the plate allowing easy insertion into the camera. Includes 2x D-Tap ports for accessory power To mount the WC V-Mount onto the C300mkII, the below combination is recommended Fixed Base (C100, C300, C500) - baseplate that holds 15mm lightweight rods at correct lens heightBattery Slide - an adjustable battery mounting plate that attaches a V-Mount or Gold Mount plate to Rod ClampsRod Clamp (15mm LW) - mounts Battery Slide to two 15mm lightweight rods WC V-Mount (C300mkII) Specifications Weight 227gDimensions 143.2 mm x 92 mm x 21.9 mm

€209.00*

gross: €248.71

Details

Wooden Camera 15mm Rod

Wooden Camera 15mm Rod 15mm diameter, hard anodized, thick walled, aluminum iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more. ATTENTION! Sold as single rods. If a pair of rods are required, add two to cart. 15mm Rod Available in lengths 3" / 7.62 cm6" / 15.24 cm9" / 22.86 cm12" / 30.48 cm15" / 38.1 cm18" / 45.72 cm24" / 60.96 cm

Variants from €25.00*

€80.00*

gross: €95.20

Details

Free shipping

Wooden Camera Quick Base Plate (Canon C100, C300, C500)

Wooden Camera Quick Base SKU: 162000 Wooden Camera Quick Base (C100, C300, C500) is a quick release baseplate for the Canon Cinema EOS cameras that provides lightweight 15mm rod support at the correct lens height. Note that 15mm lightweight rods do not passthrough. If rear rods are needed, install additional Wooden Camera Rod Clamp (15mm LW) to rear. The baseplate can attach to any tripod plate or ARRI standard bridgeplate such as Bridgeplate (19mm) or Bridgeplate (15mm Studio). When studio rods are not needed, a Dovetail Clamp can be added instead to interface with 2060 Dovetails, Safety Dovetails, or Shoulder Rigs. Additional Rod Clamp (15mm LW) can be attached to rear of Quick Dovetail for independent rear rod support. To quick release out of dovetail/baseplate, turn thumbscrew and depress pin, move camera toward rear, and remove. Wooden Camera Quick Base Features 1/4-20 and 3/8-16 holes for attaching accessoriesQuick release slot based on ARRI standard dovetail1/4-20 and 3/8-16 holes on bottom for attaching to tripod or bridgeplateRosette Bracket - attaches to Quick Base front, provides ARRI standard rosettes for attaching handles and extensionsGO Shoulder - attaches to Quick Base rear, low profile shoulder pad for run and gun shooting Quick Base (C100, C300, C500) Includes 1 x 1/4-20 low profile screw1 x 3/8-16 low profile screw

€380.00*

gross: €452.20

Wooden Camera WC V-Mount (XLR 4 Pin)

Wooden Camera WC V-Mount (XLR 4 Pin) SKU: 179200 Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and standard 4 pin XLR power connector. Plate provides unregulated 12V power (12-16V depending on battery connected). Great for cameras like Blackmagic Studio Camera (BMSC), Panasonic GH4-YAGH, Sony F55/F5, AJA CION, and more. 2x D-Taps on plate provide 12-16V depending on battery connected Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). Weight 234 gDimensions 142.4 mm x 90.8 mm x 21.3 mmCable length 40 cm

€235.00*

gross: €279.65

Free shipping

Wooden Camera AIR EVF Mount (ARRI Alexa Mini MVF-1)

Wooden Camera AIR EVF Mount (ARRI Alexa Mini MVF-1) SKU: 248500 Wooden Camera AIR EVF Mount (ARRI Alexa Mini MVF-1) is an ultra-lightweight EVF mount for the ARRI MVF-1 (K2.75004.0) used on Alexa Mini / Amira and the ARRI VF-1 (K2.72008.0) used on Alexa XT, SXT, SXT-W, and Classic. Wooden Camera AIR EVF Mount is almost half of the weight of products on the market, which is how it got the name! The system moves forwards and backwards over the lens area on two 15mm rods, left and right on a 19mm rod, and a friction knuckle allows for quick tilting of the EVF without having to loosen a thumbscrew. A top 15mm lightweight rod mount is required for proper attachment of the AIR EVF Mount, and the Master Top Handle, shown in the example photos and video is a good option for this. Alternatively, if you have the NATO Handle Kit (Plus, 100mm) or similar, a Rod Clamp (15mm LW) can be added to the front which would hold the two 15mm rods. The tool-less design allows quick installation and removal of EVF and if further extension is needed for tripod shooting, the AIR EVF Extension Arm (ARRI Alexa Mini MVF-1) can be installed using the same method. Weight: 282g Dimensions: 158.8 mm x 145.5 mm x 45.4 mm

€500.00*

gross: €595.00

Details

Wooden Camera Top Plate (F55, F5) for Sony F55 / F5

Wooden Camera Top Plate (F55, F5) SKU: 163700 Wooden Camera Top Plate (F55, F5) is a top cheeseplate for the Sony F55 and F5 that contours to the shape of the camera body and leaves the vent area open. Original Sony focus hook can remain attached to camera. Stopper screw at front prevents accidental unlocking of FZ mount. Plate provides rows of 1/4-20 and 3/8-16 holes for attaching Handles, UVF Mount v2, Rod Clamps, and more. Additional screw holes allow attachment of original Sony F55 handle. 1/4-20 holes - in standard spacing (9mm center to center)3/8-16 holes - in ARRI standard spacing (50mm center to center)Includes 4 x 1/4-20 x 3/8 socket cap screws

€275.00*

gross: €327.25

Details

Free shipping

Wooden Camera Trigger Handle (RED Weapon / Scarlet-W / Raven)

Wooden Camera Trigger Handle (RED Weapon / Scarlet-W / Raven) SKU: 228000 Trigger Handle for RED Weapon, Scarlet Weapon, Raven cameras attaches without tools directly to the top of the camera brain or to the Easy Top (Weapon/Scarlet-W/Raven) to trigger the camera through the pogo interface. Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. Attaches to top of camera by (2) 1/4-20 captured thumbscrews. Additionally, Rod Clamps can be attached to the front for a pass through top rod system. Includes 2 x 1/4-20 x captured thumbscrews

€320.00*

gross: €380.80

Free shipping

Wooden Camera Battery Slide (Panasonic EVA-1)

Wooden Camera Battery Slide (Panasonic EVA-1) SKU: 254200 Wooden Camera Battery Slide (Panasonic EVA-1) is an adjustable mounting system for attaching the WC V-Mount (Panasonic EVA-1) or WC Gold Mount (Panasonic EVA-1) directly to the side of the Wooden Camera Top Plate (Panasonic EVA) via the ARRI accessory mount. Apply firm pressure to tilt the plate in place and access HD-SDI and other ports on the camera back. Loosen the thumbscrew to slide the plate up and down and also tilt. Great for adjusting counterbalance and for transitioning from studio to handheld mode. For a rod based solution, instead choose the standard Battery Slide and combine with Rod Clamp (15mm LW), Rod Clamp (19mm), or Rod Clamp (15mm Studio). Includes 4 x M3 x 12mm Pan Head Screws4 x M3 x 8mm Pan Head Screws4 x M3 x 8mm Phillips Flat Head Screws Specifications Weight: 226.80g Dimensions: 152.4 mm x 114.3 mm x 45.7 mm

€180.00*

gross: €214.20

Details

Wooden Camera WC V-Mount (Blackmagic Pocket 4K / 6K / 6K Pro)

Wooden Camera WC V-Mount BMPCC4K (Blackmagic Pocket Cinema Camera 4K) SKU: 264300 Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and Blackmagic Pocket Cinema Camera 4K connector. Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). Weight: 187gDimensions: 142.6 mm x 92.1 mm x 21.9 mm 2 x D-Tap ports for accessory powerCable length: 406.4mm

€180.00*

gross: €214.20

Details

Wooden Camera Rod Clamp (15mm LW)

Wooden Camera Rod Clamp (15mm LW)

Includes

Technical data

TOP-Handles - Camera cages - Camera plates - Camera brackets - Matte box - Battery plates - Power cables

The professional source for Filmmakers in Düsseldorf

We provide best equipment and advice in the field of professional video- and audio- technology