Wooden Camera Unified Bridgeplate (15mm Studio) ARRI Standard

Wooden Camera Unified Baseplate (Canon C700) SKU: 242800 Wooden Camera Unified Baseplate (Canon C700) is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height for Canon EOS C700. 15mm rods pass through front to back and have two locking thumbscrews per side. The baseplate quick releases in two ways, giving the user the option to take the 15mm lightweight rods or to leave them behind. To remove the camera and leave the LW 15mm rods behind, unlock the right side thumbscrew, slide the camera backwards a short distance, and lift straight up. The dovetail attached to the bottom of the camera is an ARCA Swiss standard shape which can integrate with many third party products. Additionally, there are threaded 1/4-20 holes on the bottom for attaching to gimbals or tripod plates when necessary. On the sides, there are 1/4-20 holes and the ARRI standard accessory mount (3/8-16 threaded hole with locating pins adjacent). Also on this upper dovetail is a vertical 15mm rod opening which can be used to support a lens adapter foot directly in front of the camera body. The bottom of the Wooden Camera Unified Baseplate is comprised of the Lower Quick Dovetail which has 1/4-20 and 3/8-16 threaded holes for attaching to tripod plate or ARRI standard bridgeplate such as Unified Bridgeplate (19mm) or Unified Bridgeplate (15mm Studio). To remove the camera from the included Lower Quick Dovetail and take the 15mm lightweight rods with you, unlock the left thumbscrew, slide the baseplate backwards a short distance, and lift up. This action exposes an integrated ARRI dovetail slot on the bottom which can attach directly to any 2060 Dovetails, Safety Dovetails, or Shoulder Rigs. For VCT-14 compatible mounting options, the Unified Baseplate can be attached to the Unified VCT Wedge Plate, providing easy counterbalance ability while on the shoulder. This could then be attached to the Unified VCT-14 Tripod Plate which would be attached to the tripod head.Additional Unified Lower Quick Dovetails can be purchased to mount to gimbals, jibs, cranes, etc, making for quick and repeatable camera transitions. Features Upper dovetail based on ARCA Swiss dovetail shapeVertical 15mm rod hole for optional support posts, ideal for lens adapters like Metabones, etc.Pass through 15mm lightweight rod openings with two locking thumbscrews per rodLower dovetail based on ARRI standard dovetail shape1/4-20 and 3/8-16 holes for attaching to tripod plates and Bridgeplates Includes (2) 1/4-20 low profile screw (2) 3/8-16 low profile screw Specifications Weight: 498.9 g Dimensions: 50.8 x 152.4 x 152.4 mm Camera Compatibility Sony FS5Panasonic VariCam LTPanasonic VariCam 35

Wooden Camera RED DSMC2 Accessory Kit (Pro, 15mm Studio) SKU: 264800 The RED DSMC2 Accessory Kit (Pro, 15mm Studio) is compatible with RED DSMC2 Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), and Raven. The RED DSMC2 Accessory Kit (Pro, 15mm Studio) includes the Easy Riser, a baseplate that has 1/4-20 and 3/8-16 mounting points on the bottom, provides 1/4-20 holes on the side for attaching accessories and also brings the camera up to correct lens height when using the included Unified Bridgeplate (15mm Studio). The Unified Bridgeplate (15mm Studio) holds 2x 15mm Rods (12") and attaches to the ARRI standard Safety Dovetail (12").On top of the camera, the Pass Through Top Plate (RED DSMC2) provides 26pin LCD Connection and 3pin trigger handle interface. The Trigger Handle (RED DSMC2) is a tool-less handle that can trigger the camera through the 3pin pogo interface on top of the camera or Pass Through Top Plate (RED DSMC2). The Ultra Arm Monitor Mount (1/4-20 to 1/4-20, 3") is an articulating arm with two sets of 25mm (1 inch) double ball joints which allow a monitor or accessory to be positioned in almost any orientation. Tool-less 1/4-20 screws on each end with non-slip rubber pads make accessory installation quick and easy. The A-Box (RED DSMC2) plugs into the RED Base Expander Module and converts the 3.5mm microphone input into two industry standard XLRs. Note that the Base Expander Module is required for the A-Box to function and phantom power is not available. Includes Pass Through Top Plate (RED DSMC2)Easy Riser (RED DSMC2)Trigger Handle (RED DSMC2)Ultra Arm Monitor Mount (1/4-20 to 1/4-20, 3")Unified Bridgeplate (15mm Studio)Safety Dovetail (12")A-Box (RED DSMC2)2x 15mm Rod (12") Specifications Weight: 2359gDimensions: 323.85 mm x 330.20 mm x 76.20 mm