Skip to main content
Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Hotline +49 211 930 730-33

Z CAM E2 F6 Full-Frame 6K Cinema Camera (EF Mount)

Z-CAM E2-F6

The Z CAM E2-F6 Full-Frame 6K Cinema Camera features a full-frame sensor with 10-bit 4:2:2 color support and nominal 15 stops of dynamic range, supports timecode, shoots up to 6K at up to 60 fps, and records data up to 300 Mb/s onto CFast 2.0 media. Z-CAM E2-F6 lets you shooting professional high-definition cinema footage.

Features

  • 12-Bit ProRes RAW recording over HDMI to the Ninja V 5” HDR monitor-recorder
  • 6K @60fps* & 4K @120fps max, 10-bit color
  • Full Frame CMOS sensor
  • 15 stops dynamic range
  • ZRAW supported
  • EF mount (optional M, MFT, and PL mount accessory)
  • Gigabit Ethernet for data, control & live preview
Related links of the manufacturer

Accessory Items

HPRC ZE2F6-2400-01 HPRC2400 for Z CAM E2-F6
HPRC2400 for Z CAM E2-F6 Full Frame 6K Cinema Camera SKU: ZE2F6-2400-01 This lightweight, impact-resistant and waterproof resin case is specifically designed to carry and protect the Z CAM E2-F6 Full Frame 6K Cinema Camera with the SmalllRig Cage mounted and accessories. The Vector Panel increases the protection of the equipment stored and enables a quick and easy organization of the space. The case features a foam interior custom-cut that fits: Z Cam E2-F6 Full Frame 6K Cinema Camera with Smallrig Cage mountedAlternative Lens MountAccessoriesChargerCableNF-PBatteryCFast 2.0WiFi Antenna Dimension internal dimension  377 mm x 263,9 mm x150,8 mmexternal dimension 402 mm x 330,5 mm x 169,2 mmlid: 45mm, bottom: 107 mm

€150.00*
gross: €178.50
Tilta TA-T07-B-G Tiltaing Z CAM E2-S6 / E2-F6 Kit B
Tilta Tiltaing Z CAM E2-S6/F6 Kit BSKU: TA-T07-B-G Tilta Tiltaing Z CAM E2-S6/F6 Kit B provides complete protective armor for the Z CAM E2-S6 and Z CAM E2-F6 camera bodies. It provides several 1/4”-20 and 3/8”-16 mounting points as well as two Arri rosette mounting points and one cold shoe mounting point. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup. A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup. In the box Full Camera Cage for Z CAM E2-S6/F6Tiltaing Quick Release Top HandleTiltaing SSD Drive Holder for T5Tiltaing ARCA Quick Release PlateTiltaing Manfrotto Quick Release PlateTiltaing Side Power Handle with Run/Stop Type II (F570 Battery)Side Handle Run/Stop Cable for 2.5mm LANC Port12V Micro DC Male to Z CAM Power Cable90 Degree USB-C Cable for Z CAM (20cm)

€280.00*
gross: €333.20
Free shipping
8SINN 15MM BASEPLATE + RISER PLATE I + 10" ARRI DOVETAIL PLATE
8SINN 15MM BASEPLATE + RISER PLATE I + 8SINN 10" ARRI DOVETAIL PLATEThe Base Plate, Riser Plate, and Arri Dovetail Plate -  The first two items used together with one of the cages listed below will help you to obtain the standard, 85mm optical center for those cameras. The whole configuration is put on the Arri Dovetail Plate for maximizing the balance if required. In the end, this three-piece system provides you with many features and the opportunity for further development.The presented Riser Plate allows obtaining the optical center when used with the following cages8Sinn Z CAM E2-S6/F6/F8 Cage8Sinn Z CAM E2 Cage8Sinn Sony a7III / a7RIII Cage8Sinn Sony A7RIV Cage 8Sinn Cage for Sony a7SIII8Sinn BM Pocket Cinema Camera 4K / 6K Cage8Sinn BM Pocket Cinema Camera 4K / 6K Half Cage8Sinn Cage for Red® Komodo RED® Raptor (83.4mm)8Sinn Cage for RED Komodo / Komodo-X8Sinn Cage for Panasonic GH68Sinn Panasonic S1H Cage8Sinn Cage for Panasonic BS1H / BGH18Sinn Cage for Canon EOS R5C8Sinn Cage for Leica SL2 / SL2-SList of cameras compatible for optical center with the Riser Plate I without the cageSony FX6Set includes1pc 8Sinn 15mm Baseplate1pc 8Sinn Riser Plate I1pc 8Sinn 10" Arri Dovetail Plate

€259.00*
gross: €308.21
8Sinn Z CAM E2-S6/F6/F8 Cage
8Sinn Z CAM E2-S6/F6/F8 Cage The elegant and clean-cut design packed with mounting points and the outline synchronized with the camera body has been prepared to let you arrange your accessories in every possible way. Boost your gear and enjoy your work with the Z CAM camera in the 8Sinn Z CAM E2-S6/F6/F8 Cage. Cage compatibility Z CAM E2-S6 Z CAM E2-F6 Z CAM E2-F8 Z CAM E2-M4 Dimensions: Height: 113mm, Length: 107mm, Width: 101mm; Weight: 330g Set includes: 1pc 8Sinn Z CAM E2-S6/F6/F8 Cage

€169.00*
gross: €201.11
Kondor Blue Z Cam E2 Flagship Cable Pack
Kondor Blue Z Cam E2 Flagship Cable Pack Kondor Blue Z Cam E2 Flagship Cable Pack consists of: 1 x 5 PIN LEMO TO XLR AUDIO CABLE1 x D-TAP TO LEMO COILED 2 PIN 0B MALE POWER CABLE1 x USB C CABLE FOR SSD Video RECORDING1 x 14" HDMI BRAIDED CABLE 4K

€100.00*
gross: €119.00
Tip
DZOFILM Pictor Zoom 50-125mm T2.8 S35 (PL/EF Mount)
DZOFilm Pictor 50-125mm T2.8 DZOFilm Pictor 50-125mm T2.8 S35 is a parfocal cine lens that holds focus throughout the zoom range. The internal focus design with floating elements virtually eliminates focus breathing. DZOFilm Pictor features  fast maximum aperture of T2.8 with an aperture range of T2.8 to T22. and covers a Super35 image circle. This parfocal cine lens comes with interchangeable PL mount, and includes a Canon EF mount.

€1,380.00*
gross: €1,642.20
Tip
DZOFILM Pictor Zoom 14-30mm T2.8
DZOFILM Pictor Zoom 14-30 SKU: DZO-7220003B DZOFILM Pictor 14-30mm T2.8, the latest Super 35 wide-angle lens The Pictor 14-30mm T2.8 Super35 Parfocal Zoom Lens features a relatively fast maximum aperture of T2.8 with an aperture range of T2.8 to T22, and it adds an extreme wide-angle zoom to the Pictor line of lenses. As you would expect from a cinema-style zoom, the lens is parfocal, meaning it holds focus throughout the zoom range. The internal focus design with floating elements virtually eliminates focus breathing. It covers a Super35 image circle, comes standard with an interchangeable PL mount, and includes an EF mount. The 16-blade iris creates round out-of-focus highlights, which have a more natural appearance and contribute to the lens's natural-looking bokeh. The lens features cine-style gear rings on the focus, iris, and zoom lens rings, making it compatible with cine-style lens accessories such as follow focus units, lens motors, and lens control systems. The 95mm outer front diameter allows you to use a variety of compatible third-party matte boxes, and the lens has an 86mm filter thread. A lens support foot allows you to support the lens on rods to help reduce strain on your camera's lens port. Please Note: According to the manufacturer, when converted to EF mount this lens is not compatible with DSLR cameras that have an EF mount. However, it is compatible with mirrorless cameras that have an EF mount, including Blackmagic Design cameras. Features Maintains focus throughout the zoom range Minimal focus breathing 16-blade iris produces round out-of-focus highlights T2.8 to T22 aperture Common Pictor 95mm front diameter Compatible with standard cine-style lens accessories Technical data FOCAL LENGTH: 14-30MMMOUNT: PL/EFT - STOP: T2.8-22Image Circle: φ31.5 mm(S35)CLOSE FOCUS: 0.6m / 2ftZOOM Ratio: ≈2.14XFlange Distance: PL=52mm / EF=44mmIris control: 61°FOCUS control: 270°ZOOM control: 100°FRONT OUTER DIA.: φ95 mm/3.74”FILTER SIZE: M86*0.75Gear Pitch: 0.8MLENGTH: 173mm (PL) 6.81” / 181mm (EF) 7.13”Iris blades: 16WEIGHT: ≈1880g

€1,100.00*
gross: €1,309.00
Free shipping
8Sinn Shoulder Rig Kit
8Sinn Shoulder Rig Kit SKU: 8-SRK 8Sinn Shoulder Rig Kit includes: 1 x 8Sinn 15mm Baseplate + Riser Plate I 2 x 8Sinn Side Arm for Shoulder Rigs + Dual Side Grip 1 x 8Sinn Shoulder Support Baseplate features 2 x 28mm Arri Rosettes 15mm rod compatible 3 x thumbscrews 4 x 1/4" threaded openings 60mm center-to-center distance Dovetail guide rails (bottom) Riser Plate I features 2 x 1/4" mounting screw 3/8" mounting screw Rubber pads Aluminum made Shoulder Support features Aluminum made Lightweight 3 x 3/8" Arri locating points Knurled rear surface Slender profile 1/4"-20 x1/2"(12mm) mounting screws Rod Mount Bridge features 15mm rod compatible 6 x 1/4" threaded mounting points Aluminum made 60mm center-to-center distance Thumbscrew on each side Compatibility Riser Plate I, included in this kit allows to obtain the optical center when used with the following cages: 8Sinn Z CAM E2-S6/F6/F8 Cage 8Sinn Z CAM E2 Cage 8Sinn Sony a7III / a7RIII Cage 8Sinn Sony A7RIV Cage 8Sinn BM Pocket Cinema Camera 4K / 6K Cage 8Sinn BM Pocket Cinema Camera 4K / 6K Half Cage 8Sinn Red Komodo Cage Specifications:weight: 1.070 kg (+ rods)

€659.00*
gross: €784.21
Free shipping
8Sinn 15mm Baseplate + Riser Plate I + 5" Arri Dovetail Plate
8Sinn 15mm Baseplate + Riser Plate I + 5" Arri Dovetail Plate 8Sinn accessories - Base Plate, Riser Plate used together with one of the cages listed below will help you to obtain the standard, 85mm optical center for those cameras. The whole configuration is put on the Arri Dovetail Plate for maximizing the balance if required. In the end, this three-piece system provides you with many features and the opportunity for further development. Compatibility The presented setup allows to obtain the optical center when used with the following cages: 8Sinn Z CAM E2-S6/F6/F8 Cage 8Sinn Z CAM E2 Cage 8Sinn Sony a7III / a7RIII Cage 8Sinn Sony A7RIV Cage 8Sinn Cage for Sony a7SIII 8Sinn BM Pocket Cinema Camera 4K / 6K Cage 8Sinn BM Pocket Cinema Camera 4K / 6K Half Cage 8Sinn Cage for Red Komodo Set includes 1 x 8Sinn 15mm Baseplate 1 x 8Sinn Riser Plate I 1 x 8Sinn 5" Arri Dovetail Plate Set's weight:  436g

€249.00*
gross: €296.31
Free shipping
8Sinn Z CAM E2-S6/F6/F8 Cage + Top Handle Pro
8Sinn Z CAM E2-S6/F6/F8 Cage + Top Handle Pro (inlude SNR60MM) 8Sinn Z CAM E2-S6/F6/F8 Cage + Top Handle Pro includes cage and top handle which are essential for filmmakers. Adding peripheral accessories is a lot easier if you have lots of various mounting points at your disposal. Key features Arri locating points Threaded openings - 1/4" 2 poinst of cage-to-camera attachment (2x bottom 1/4") Full access to camera features Clean-cut ergonomic design Aluminum made Lightweight Handle Left/right, front/back adjustment 2 x cold shoe mounts 1/4" and 3/8" mounting points Cage compatibility Z CAM E2-S6 Z CAM E2-F6 Z CAM E2-F8 Z CAM E2-M4 Dimensions: Height: 180mm, Length: 107mm, Width: 101mm; Weight: 476g Set includes: 1pc 8Sinn Z CAM E2-S6/F6/F8 Cage; 1pc 8Sinn Top Handle Pro

€259.00*
gross: €308.21
Tip
DZOFILM Pictor Zoom 20-55mm T2.8 S35 (PL/EF Mount)
DZOFilm Pictor 20-55mm T2.8 DZOFILM is devoted to exploring the aesthetic of film and design of optics. Both mechanics and optics are designed to be compact and versatile, allowing users to enjoy the smooth and precise operation and every shooting moment with Pictor Zoom No matter from close-up to wide shot or rapidly zoom out to long shot, under Parfocal design, focus keeps still all the way along Thanks to the floating structure the breathing of Pictor Zoom lenses are negligible during focusing DZOFilm Pictor Zoom can be easily mounted on crane, jib, tripod, ROV or other moving platforms, and provides safer and more efficient work methods by reducing heavy lifting.

€1,380.00*
gross: €1,642.20

Similar products

Free shipping
Z CAM E2 F8 Full-Frame 8K Cinema Camera (EF Mount)
Z-CAM E2-F8 The Z-CAM E2-F8 Full-Frame 8K Cinema Camera features a full-frame sensor with 10-bit 4:2:2 color support and nominal 14 stops of dynamic range, supports timecode, shoots up to 8K at up to 30 fps, and records data up to 300 Mb/s onto CFast 2.0 media. The Z-CAM E2-F8 lets you shooting professional high-definition cinema footage. Features 12-Bit ProRes RAW recording over HDMI to the Ninja V 5” HDR monitor-recorder8K resolutionFull Frame CMOS sensorDual native ISOZRAW supportedEF mount (with optional M, MFT, and PL mount accessory)Gigabit Ethernet for data, control & live preview

€5,500.00*
gross: €6,545.00
Free shipping
DJI Ronin 4D 4-Axis Cinema Camera
DJI Ronin 4D DJI Ronin 4D integrates cinematic imaging, a 4-axis gimbal, LiDAR focusing, and wireless video transmission and control, making it incredibly convenient for you to start shooting quickly. Its modular design supports expansion accessories, offering more creative possibilities. The full-frame X9 gimbal camera can internally record in ProRes 422 HQ, and supports 14+ stops of dynamic range, dual native ISO, built-in 9-stop ND filters, and interchangeable lens mounts to put cinematic imagery within your reach. Autofocus is fast, accurate, and reliable even in low-lit environments, and is now available on manual lenses. LiDAR Waveform makes manual focusing more intuitive and convenient. Automated Manual Focus delivers an unrivaled focusing experience. The Z-Axis effectively eliminates vertical camera shake and works with visual sensors and ActiveTrack Pro to let you create smooth, stable footage effortlessly. O3 Pro Video Transmission Technology adds DFS frequency bands and enables 1080p/60fps video transmission. It supports one transmitter with multiple receivers and can remotely control gimbal, focusing, and camera settings. Features Highly Integrated Modular DesignFull-Frame Gimbal Camera6K/60fps and 4K/120fps Internal ProRes Recording - 6K Combo8K/75fps Internal ProRes Recording - 8K Combo4-Axis Active StabilizationLiDAR FocusingWireless Transmission and Control System 6K Combo - In the Box DJI Ronin 4D 4-Axis Cinema Camera 6K Combo Kit Zenmuse X9-6K Gimbal Camera DL Mount DL Mount Body Cap DL Mount Lens Cap X9 Gimbal Base Cap Ronin 4D Gimbal Base Cap Main Body 2 x Handgrip Handgrip Extended Control Stick Top Handle TB50 Battery Mount TB50 Intelligent Battery 2 x Handgrip Strap Power Adapter 8 x AC Power Cable TB50 Charging Adapter Baseplate LiDAR Range Finder/Focus Motor Cable USB Type-A to Type-C Cable Ronin 4D Carrying Case Ball-End Allen Key (3mm) 6 x 1/4"-20 Screw (10mm) LiDAR Range Finder LiDAR Range Finder Holder C-Shaped DL Mount Ring 2 x M2-3 Screw (3mm) Ball-End Allen Key (1.5mm) 8K Combo -In the Box DJI Ronin 4D 4-Axis Cinema Camera 8K Combo Kit Zenmuse X9-8K Gimbal Camera DL Mount DL Mount Body Cap DL Mount Lens Cap X9 Gimbal Base Cap Ronin 4D Gimbal Base Cap Main Body 2 x Handgrip Handgrip Extended Control Stick Top Handle High-Bright Main Monitor TB50 Battery Mount TB50 Intelligent Battery 2 x Handgrip Strap Power Adapter 8 x AC Power Cable TB50 Charging Adapter Baseplate LiDAR Range Finder/Focus Motor Cable USB Type-A to Type-C Cable Ronin 4D Carrying Case Ball-End Allen Key (3mm) 6 x 1/4"-20 Screw (10mm) LiDAR Range Finder LiDAR Range Finder Holder C-Shaped DL Mount Ring 2 x M2-3 Screw (3mm) Ball-End Allen Key (1.5mm)

€5,540.00*
gross: €6,592.60
Z-CAM E2-M4
Z-CAM E2-M4 The Z-CAM E2-M4 Professional 4K Cinema Camera features an interchangeable Micro Four Thirds lens mount, a Flagship Series housing, and like all Z-CAM E2s with the latest update, the ability to record ProRes RAW using select Atomos recorder/monitors. This compact camera records DCI and UHD 4K at up to 160 fps, as well as HD up to 240 fps, and records to a Cfast 2.0 card (not included). A future update will enable the E2-M4 to will support RTMP, RTPS, and SRT live streaming directly from the camera without requiring a computer. The camera features a 4/3" sensor with 10/12-bit color support and nominal 13 stops of dynamic range with 16 stops when set to WDR. The camera supports recording in ProRes 422 in 10-bit, as well as H.265 and H.264 codecs for efficient compressing of your image. The E2-M4 can be controlled via serial ports, a 2.5mm LANC connector, a USB Type-C port, an Ethernet port, or by the Z Camera iOS app to control the camera via Wi-Fi and to view a live image preview and to configure settings. The camera can record time-lapse, slow motion, and can even live stream via its Gigabit Ethernet port. Power the E2-M4 camera from a separately available L-series battery or AC adapter.

€1,430.00*
gross: €1,701.70
Pay with:
We ship with: