Skip to main content
Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Showroom in Warsaw +48 22 299 06 61

Allen Avionics HD-VIT-75 Video Isolation Transformer

Allen Avionics HD-VIT-75

The Allen Avionics HD-VIT-75 Video Isolation Transformer eliminates hum in HD-SDI transmission lines. It provides electrical isolation between the input and output and also eliminates induced currents in long cable runs. This device is useful for broadcast systems where hum is present due to ground loops or where there are large differences in ground potential.

Supports all transmission rates of SMPTE259m and SMPTE292m up to 1.5 Gbps HD-SDI video input
Equivalent to less than 20 ft (6 m) of cable
Isolated signal path
Greater than 60 dB of ground loop isolation
Passive device -- no power required
Small cylindrical package with gold-plated BNC connectors for better response
75 Ohms balanced with 3.0 GHz bandwidth
Greater than 15 dB return loss till 1.5 GHz
2 kV flash tested

Related links of the manufacturer

Accessory Items

Next Level NLV-13 3G HD SDI Isolator
Next Level NLV-13 Professional 3G HD SDI Isolator It is a separator of SDI (Serial Digital Interface) signals with a bit rate up to 3Gbit / s. This device, similarly to the separation transformers in the audio paths. It serves for the galvanic separation of the signal path to eliminate interference. NLV-13 It is perfect for SD, HD, HD3G video signals as well as ASI (Transport Stream) signals. It is most often used in extensive or distributed Video installations, in which individual parts of the system are powered from different power sources. The separator passes the video signal, blocking the unwanted voltage resulting from the potential difference between the elements of the installation supplied, for example, from the aggregate and the power grid. An additional benefit resulting from the use of the Next Level NLV-13 separator is the protection of inputs and outputs of video devices against damage due to the appearance of potential differences between the elements of the video track. The device was placed in a small housing and equipped with BNC 75Ohm connectors. The dimensions of the separator and the appropriately designed flange allow for its easy installation in standard 19” panels with holes for XLR type D connectors

PLN 559.50*
net: PLN 454.88
Pay with:
We ship with: