Benro DL-08 Tripod Dolly

Benro BV8 SKU: BV8 The Benro BV8 tripod kit supports up to 17.6 lbs. / 8 kg making it a perfect match for studio applications and larger video cameras. All of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera. The 5 step counterbalance (steps 0-4) allows you to dial in the correct amount of counterbalance for your set-up. The 4 step pan & tilt movements make sure your movements are smooth and steady. One 3/8" accessory mount come in handy when needing to add a simple audio recorder or monitor. For added versatility, the tie down stud is removable to convert the BV8 head to flat base mode for mounting to a slider. Excellent stability is achieved with the integrated 75mm metal ball. The eighth generation two stage aluminum tripod is a double tandem leg design that uses an adjustable, removable spreader, a metal 75mm bowl, oversized quick positive leg locks and dual spike feet with pads, making this kit perfect for heavy loads and rigged cameras. In the box Video TripodVideo HeadQR PlateMid Level SpreaderDeluxe Carry CaseStrapRubber FeetTools Benro BV8 Technical data Maximum Load 8 kgMax Height (24° Leg Angle) w/Column Extended 160 cmMinimum Height 71.5 cmMaximum Height 160 cmFolded Length 86.7 cmNumber of Leg Sections 5Leg Lock TypeTwist Lever LockIndependent Leg Spread ML08 Mid-Level SpreaderTilt Range +90 / -70 (Stepped 0-5 Fluid Cartridge Balance)Quick Release (QR) PlateSlide-in Video (QR10) 1/4-20 & 3/8Head Mount Thread Size 75mm BowlWeight 6.3 kg

Benro KH26P Aluminium Dual-Tube Twist-lock 3-Section TALL tripod with K5 Video Head Kit The Benro KH26NL Video Tripod Kit is an ideal support solution for compact camcorders and DSLR/mirrorless camera rigs. The system features a dual-stage aluminum legs and a 60mm ball video head for quick leveling. The head has fixed pan/tilt drag with independent pan/tilt locks and uses a sliding quick release plate for camera attachment. The tripod incorporates a mid-lever spreader for enhanced rigidity, and offers a working height range of 86.0 cm - 182 cm. The legs are independently adjustable and are secured in place using twist-lock levers. For use on a variety of indoor and outdoor surfaces, the legs feature dual spiked feet that can be covered with removable rubber pads. The entire KH26NL system folds up to a length of 89.4 cm for storage and transport inside an included padded carrying case. KH26NL features Two-stage aluminum tripod with 60mm bowlSupports loads up to 5 kgFixed pan/tilt drag with independent pan/tilt locksSliding quick release platePan handle attaches to either side of headHeight range: 86.0 cm - 182 cmFixed, non-removable mid-level spreaderIndependent leg adjustment using twist-lock leversDual spiked feet with removable rubber padsHead-mounted bubble levelFolded length: 89.4 cm In the box Benro KH26NL Video Tripod KitQR11 Video Quick-Release PlateBS07 Pan Bar HandleCarrying Case

Benro BV10 SKU: BV10 The Benro BV10 tripod kit supports up to 22 lbs. making it a perfect match for studio applications and larger fully rigged video cameras. All of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera. The 5- step counterbalance (steps 0-4) allows you to dial in the correct amount of counterbalance for your set-up. The 4 step pan & tilt movements make sure your movements are smooth and steady. One 3/8" accessory mount come in handy when needing to add a simple audio recorder or monitor. For added versatility, the tie down stud is removable to convert the Benro BV10 head to flat base mode for mounting to a slider. Excellent stability is achieved with the integrated 100mm metal ball. The eighth generation two stage aluminum tripod is a double tandem leg design that uses an adjustable, removable spreader, a metal 100mm bowl, oversized quick positive leg locks and dual spike feet with pads, making this kit perfect for heavy loads, ideal for supporting jibs and fully rigged cameras. In the box Video TripodVideo HeadQR PlateMid Level SpreaderDeluxe Carry CaseStrapRubber FeetTools Benro BV10 Technical data Maximum Load 10 kgMax Height (24° Leg Angle) w/Column Extended 163.5 cmMinimum Height 74 cmMaximum Height 163.5 cmFolded Length 88 cmNumber of Leg Sections 4Leg Lock TypeTwist Lever LockIndependent Leg Spread ML08 Mid-Level SpreaderTilt Range+90 / -65 (Stepped 0-5 Fluid Cartridge Balance)Quick Release (QR) PlateSlide-in Video (QR10) 1/4-20 & 3/8Head Mount Thread Size 100mm BowlWeight 7.28 kg

Benro KH25P Aluminium Dual-Tube Twist-lock 3-Section tripod with K5 Video Head Kit The Benro KH25N Video Tripod Kit is a sturdy, twin-leg video tripod solution designed for compact camcorders and DSLR/mirrorless camera rigs weighing up to 5 kg. The KH25N system features dual-stage aluminum legs and a 60mm ball video head for quick leveling. The head has fixed pan/tilt drag with independent pan/tilt locks and uses a sliding quick release plate for camera attachment. The tripod incorporates a mid-lever spreader for enhanced rigidity, and offers a working height range of 28.9 to 61". The legs are independently adjustable and are secured in place using twist-lock levers. For use on a variety of indoor and outdoor surfaces, the legs feature rubber feet that can be rotated to reveal metal spikes. The entire system folds up to a length of 30.5" for storage and transport inside an included padded carrying case. KH25N features Two-stage aluminum tripod with 60mm bowlSupports loads up to 5 kgFixed pan/tilt drag with independent pan/tilt locksSliding quick release platePan handle attaches to either side of headHeight range: 73,4 cm  - 155 cmFixed, non-removable mid-level spreaderIndependent leg adjustment using twist-lock leversRubber feet with enclosed metal spikes for use on a variety of surfacesHead-mounted bubble levelFolded length: 77.4 cm In the box Benro KH25N Video Tripod KitQR11 Video Quick-Release PlateBS07 Pan Bar HandleCarrying Case