Blackmagic 2110 IP Converter 8x12G SFP
Blackmagic 2110 IP Converter 8x12G SFP
Blackmagic 2110 IP Converter 8x12G SFP lets you add SMPTE-2110 UP video to 12G-SDI broadcast equipment. It features 8 independent bidirectional 12G-SDI to SMPTE-2110 IP video converters using SFP modules for compatibility with optical fiber Ethernet modules for long distances. Its 1RU design includes and control panel with LCD and support HD and Ultra HD standards up to 2160p60.
- Total SDI Inputs: 9
- SDI Video Inputs: 8
- SDI Main Program Inputs: 1
- Total SDI Outputs: 9
- SDI Video Outputs: 8
- SDI Main Program Outputs: 1 Loop Out
- SDI Rates: 270Mb, 1.5G, 3G, 6G, 12G
- SMPTE ST-2110 IP Video Inputs/Outputs: 8 x 10G Ethernet
- Analog Audio Outputs: 1 x 6.35 mm headphone socket
- SDI Audio Inputs: 16 Ch embedded audio on SDI input
- SDI Audio Outputs: 16 Ch embedded audio on SDI loop output
- SMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on ST-2110 IP video via 10G Ethernet
- SMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on ST-2110 IP video via 10G Ethernet
- Analog Audio Outputs: 1 x 6.35 mm headphone socket
- Multi Rate Support: Auto detection of SD, HD, Ultra HD and 4K
- Reclocking: Yes
- Ethernet: 8 x 10Gb/s SFP sockets supporting up to 10G BASE-T for SMPTE 2110 IP video in and out. 1 x 1Gb/s RJ‑45 connector supporting 10/100/1000 BASE-T for configuration and firmware updates
- Computer Interface: 1 x USB-C 3.0 for configuration and firmware updates
- SD Video Standards: 525i59.94 NTSC, 625i50 PAL
- HD Video Standards: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p47.95, 1080p48, 1080p50, 1080p59.94, 1080p60, 1080PsF25, 1080PsF29.97, 1080PsF30
- Ultra HD Video Standards: 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p47.95, 2160p48, 2160p50, 2160p59.94, 2160p60
- 4K Video Standards: 4Kp23.98 DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI, 4Kp48 DCI, 4Kp50 DCI, 4Kp59.94 DCI and 4Kp60 DCI
- SDI Video Rates: SDI video connections are switchable between standard definition, 720p, 1080i, 1080p, 2K DCI, Ultra HD and 4K DCI
- SDI Color Precision: 4:2:2
- SDI Color Space: YUV
- SDI Auto Switching: Automatically detects SD, HD, 2K DCI, Ultra HD and 4K DCI. Level A and B is automatically detected on 3G-SDI input and user selectable on 3G‑SDI output
- SMPTE 2110-20 (Uncompressed Video): IGMP v2
- SMPTE 2110-21 (Traffic Shaping): Sender: Narrow / Receiver: Narrow, Wide Synchronous, Asynchronous
- SMPTE 2110-30 (PCM): Audio Conformance level: Level C
- SMPTE 2110-40 (Ancillary Data): Full access to entire SMPTE ancillary data stream. Includes RP 188/SMPTE 12M-2, closed captioning and HDR static metadata
- Codec: Blackmagic IP10 codec used when converting 12G-SDI rates to 10G 2110 IP video
- Precision Time Protocol: IEEE 1588-2008 (PTP v2) / ST 2059-1 / ST 2059-2
- NMOS IS-04 Discovery and Registration: v1.3.2 / Peer-to-peer via mDNS/DNS‑SD =NMOS IS-05 Connection Management: v1.1.2
- NMOS BCP-002-01: Natural Grouping
- NMOS BCP-004-01: Receiver capabilities
- Audio: Front panel audio monitor speaker with speaker control button, plus 6.35 mm headphone socket
- Built in Control Panel: 12 button control panel, 2.2 inch color display and spin knob for setup and menu settings
- Operating Systems: Mac 13.0 Ventura, Mac 14.0 Sonoma or later, Windows 10 and 11
- Power Supply: 2 x Internal 100 - 240V AC 50/60Hz with IEC C14 mains input
- Power Usage: TBA
- Physical Installation: 1 rack unit
- Temperature: 5° to 40°
- Storage Temperature: -20° to 45° C
- Relative Humidity: 0% to 90% non‑condensing
Similar products
Blackmagic 2110 IP Presentation Converter
PLN 4,033.97*
net: PLN 3,279.65
Blackmagic 2110 IP Presentation Converter
Blackmagic 2110 IP Presentation Converter is designed for speaker podiums with connections for laptops, projectors and microphones all in the one converter. Computers can connect via USB-C for both video and power and there is an HDMI output for projectors that can be switched to the video input or the 2110 IP return feed. For audio, there are XLR microphone inputs and an XLR audio out for PA speakers. The RJ-45 10G Ethernet video connection can power the whole converter, even when charging a USB computer!
2110 IP Converters FeaturesAll converters conform to the SMPTE-2110 IP video standardChoose between Mini Converter or rack mount modelsUses readily available 10G Ethernet for low cost installationRe-syncs SDI inputs to a common PTP clockIncludes NMOS Protocol for building a virtual routerLow latency, open standard Blackmagic IP10 codecSupports all SD, HD and Ultra HD formats up to 2160p60
ConnectionsPC Video Inputs: 1 x front USB‑C plus 1 x rear USB‑C with 45W host charging capabilityHDMI 2.0 Video Inputs: 1HDMI 2.0 Video Outputs: 1SDI Video Outputs: 1, Automatically standards converted to destinationSDI Rates: 270Mb, 1.5G, 3G, 6G, 12GSMPTE ST-2110 IP Video Inputs: 1 x 10G EthernetSMPTE ST-2110 IP Video Outputs: 1 x 10G EthernetAnalog Audio Inputs: 2 x Combination 3-pin XLR / TRS 1/4 inch Jack connectors, switchable between +24dB line and mic level with support for +48V phantom powerAnalog Audio Outputs: 2 channels of professional balanced analog audio with 3-pin XLR connectors, 1 x 6.35 mm headphone jackSDI Audio Outputs: 16 Channels embedded in SD/HD/2K/UHD/4KHDMI Audio Inputs: 8 Channels embedded in SD/HD/UHD/4KHDMI Audio Outputs: 8 Channels embedded in SD/HD/UHD/4KUSB: 2 x USB‑C 3.1 Gen 1 (up to 5 Gb/s)Ethernet: 1 x 10Gb/s RJ‑45 connector supporting 10/100/1000/10G BASE-T for SMPTE-2110 IP video in and out, configuration and firmware updates
Blackmagic 2110 IP Converter 3x3G
PLN 2,851.69*
net: PLN 2,318.45
Blackmagic 2110 IP Converter 3x3G
SKU: CONVNVIPA3/3G
The new Blackmagic 2110 IP Converter 3x3G lets you convert 3 separate 3G-SDI devices to 2110 IP video systems. That’s because its 10G Ethernet connection can handle 3 separate video channels at the same time. Plus each channel has independent SDI inputs and SDI outputs, so you could even connect to 6 completely different SDI devices! All 3G-SDI inputs feature loop outputs so you can install the converter in line within existing SDI systems. There's also a reference output, timed to the 2110 PTP clock! Blackmagic 2110 IP Converter 3x3G includes an elegant front panel with a color LCD for monitoring, menus and diagnostics. You can even route IP inputs from the panel!
Blackmagic 2110 IP Converter 4x12G PWR
PLN 9,288.53*
net: PLN 7,551.65
Blackmagic 2110 IP Converter 4x12G PWRBlackmagic Design has a wide range of SMPTE-2110 IP video products, including converters, video monitors, audio monitors and even cameras! Plus they support Ultra HD using low cost 10G Ethernet! Most converter models are bidirectional, so they're fantastic to use on cameras when you need an extra program return! The rack mount models have an elegant design with a color LCD for monitoring, menus and diagnostics. All models conform to the SMPTE ST-2110 standard for IP video, including PTP clocks and even NMOS support so you can make connections using a video router panel. The Blackmagic 2110 IP Converter 3x3G model even includes a reference video output, timed to the 2110 PTP clock!
Blackmagic 2110 IP Converter 4x12G PWR lets you add SMPTE-2110 IP video to 12G-SDI broadcast equipment. It features 4 independent bidirectional 12G-SDI to SMPTE-2110 IP video converters using RJ-45 10G Ethernet connections which can also provide power. Its 1RU design includes a control panel with LCD and supports HD and Ultra HD standards up to 2160p60.
ConnectionsTotal SDI Inputs: 5SDI Video Inputs: 4SDI Main Program Inputs: 1Total SDI Outputs: 5SDI Video Outputs: 4SDI Main Program Outputs: 1 Loop OutSDI Rates: 270Mb, 1.5G, 3G, 6G, 12GSMPTE ST-2110 IP Video Inputs: 4 x 10G EthernetSMPTE ST-2110 IP Video Outputs: 4 x 10G EthernetAnalog Audio Outputs: 1 x 6.35 mm headphone socketSDI Audio Inputs: 16 Ch embedded audio on SDI inputSDI Audio Outputs: 16 Ch embedded audio on SDI loop outputSMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on ST-2110 IP video via 10G EthernetSMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on ST-2110 IP video via 10G EthernetMulti Rate Support: Auto detection of SD, HD, Ultra HD and 4KReclocking: YesEthernet: 4 x 10Gb/s RJ‑45 PoE++ connectors supporting 10/100/1000/10G BASE-T for SMPTE 2110 IP video in and out. PoE++ is power output only for powering connected PoE devices such as Blackmagic Cameras and Converters, 1 x 1Gb/s RJ‑45 connector supporting 10/100/1000 BASE-T for configuration and firmware updatesComputer Interface: 1 x USB-C 3.0 for configuration and firmware updates