Blackmagic 2110 IP Mini IP to HDMI

Blackmagic 2110 IP Presentation Converter Blackmagic 2110 IP Presentation Converter is designed for speaker podiums with connections for laptops, projectors and microphones all in the one converter. Computers can connect via USB-C for both video and power and there is an HDMI output for projectors that can be switched to the video input or the 2110 IP return feed. For audio, there are XLR microphone inputs and an XLR audio out for PA speakers. The RJ-45 10G Ethernet video connection can power the whole converter, even when charging a USB computer! 2110 IP Converters FeaturesAll converters conform to the SMPTE-2110 IP video standardChoose between Mini Converter or rack mount modelsUses readily available 10G Ethernet for low cost installationRe-syncs SDI inputs to a common PTP clockIncludes NMOS Protocol for building a virtual routerLow latency, open standard Blackmagic IP10 codecSupports all SD, HD and Ultra HD formats up to 2160p60 ConnectionsPC Video Inputs: 1 x front USB‑C plus 1 x rear USB‑C with 45W host charging capabilityHDMI 2.0 Video Inputs: 1HDMI 2.0 Video Outputs: 1SDI Video Outputs: 1, Automatically standards converted to destinationSDI Rates: 270Mb, 1.5G, 3G, 6G, 12GSMPTE ST-2110 IP Video Inputs: 1 x 10G EthernetSMPTE ST-2110 IP Video Outputs: 1 x 10G EthernetAnalog Audio Inputs: 2 x Combination 3-pin XLR / TRS 1/4 inch Jack connectors, switchable between +24dB line and mic level with support for +48V phantom powerAnalog Audio Outputs: 2 channels of professional balanced analog audio with 3-pin XLR connectors, 1 x 6.35 mm headphone jackSDI Audio Outputs: 16 Channels embedded in SD/HD/2K/UHD/4KHDMI Audio Inputs: 8 Channels embedded in SD/HD/UHD/4KHDMI Audio Outputs: 8 Channels embedded in SD/HD/UHD/4KUSB: 2 x USB‑C 3.1 Gen 1 (up to 5 Gb/s)Ethernet: 1 x 10Gb/s RJ‑45 connector supporting 10/100/1000/10G BASE-T for SMPTE-2110 IP video in and out, configuration and firmware updates

Blackmagic 2110 IP Converter 4x12G PWRBlackmagic Design has a wide range of SMPTE-2110 IP video products, including converters, video monitors, audio monitors and even cameras! Plus they support Ultra HD using low cost 10G Ethernet! Most converter models are bidirectional, so they're fantastic to use on cameras when you need an extra program return! The rack mount models have an elegant design with a color LCD for monitoring, menus and diagnostics. All models conform to the SMPTE ST-2110 standard for IP video, including PTP clocks and even NMOS support so you can make connections using a video router panel. The Blackmagic 2110 IP Converter 3x3G model even includes a reference video output, timed to the 2110 PTP clock! Blackmagic 2110 IP Converter 4x12G PWR lets you add SMPTE-2110 IP video to 12G-SDI broadcast equipment. It features 4 independent bidirectional 12G-SDI to SMPTE-2110 IP video converters using RJ-45 10G Ethernet connections which can also provide power. Its 1RU design includes a control panel with LCD and supports HD and Ultra HD standards up to 2160p60. ConnectionsTotal SDI Inputs: 5SDI Video Inputs: 4SDI Main Program Inputs: 1Total SDI Outputs: 5SDI Video Outputs: 4SDI Main Program Outputs: 1 Loop OutSDI Rates: 270Mb, 1.5G, 3G, 6G, 12GSMPTE ST-2110 IP Video Inputs: 4 x 10G EthernetSMPTE ST-2110 IP Video Outputs: 4 x 10G EthernetAnalog Audio Outputs: 1 x 6.35 mm headphone socketSDI Audio Inputs: 16 Ch embedded audio on SDI inputSDI Audio Outputs: 16 Ch embedded audio on SDI loop outputSMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on ST-2110 IP video via 10G EthernetSMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on ST-2110 IP video via 10G EthernetMulti Rate Support: Auto detection of SD, HD, Ultra HD and 4KReclocking: YesEthernet: 4 x 10Gb/s RJ‑45 PoE++ connectors supporting 10/100/1000/10G BASE-T for SMPTE 2110 IP video in and out. PoE++ is power output only for powering connected PoE devices such as Blackmagic Cameras and Converters, 1 x 1Gb/s RJ‑45 connector supporting 10/100/1000 BASE-T for configuration and firmware updatesComputer Interface: 1 x USB-C 3.0 for configuration and firmware updates

Blackmagic 2110 IP Mini BiDirect 12GSKU: ONVNVIPF/IP/12GBlackmagic 2110 IP Mini BiDirect 12G lets you convert broadcast cameras with SDI connections to SMPTE-2110 IP video systems. Its 12G-SDI connection supports SD, HD and Ultra HD standards up to 2160p60 and even handles the SDI program return. Blackmagic 2110 IP Mini BiDirect 12G also has a 5 pin XLR talkback headset connection with talkback volume control and a press to talk button. It connects and powers from 10G Ethernet or the included DC power supply. SDI Video Inputs: 1SDI Video Outputs: 1SDI Rates: 270Mb, 1.5G, 3G, 6G, 12GSMPTE ST-2110 IP Video Inputs/Outputs: 1 x 10G EthernetAnalog Audio Inputs: 1 x 5 pin XLR TalkbackAnalog Audio Outputs: 1 x 5 pin XLR TalkbackSDI Audio Inputs: 16 Ch embedded audio on SDI inputSDI Audio Outputs: 16 Ch embedded audio on SDI loop outputSMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on ST-2110 IP video via 10G EthernetSMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on ST-2110 IP video via 10G EthernetMulti Rate Support: Auto detection of SD, HD, 2K, Ultra HD and 4KReclocking: YesEthernet: 1 x 10Gb/s RJ‑45 connector supporting 10/100/1000/10G BASE-T for SMPTE-2110 IP video in and out, configuration and firmware updatesComputer Interface: 2 x USB-C 3.1 Gen 1 (up to 5 Gb/s) for configuration and firmware updatesSD Video Standards: 525i59.94 NTSC, 625i50 PALHD Video Standards: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p47.95, 1080p48, 1080p50, 1080p59.94, 1080p60, 1080PsF25, 1080PsF29.97, 1080PsF302K Video Standards: 2Kp23.98 DCI, 2Kp24 DCI, 2Kp25 DCI, 2Kp29.97 DCI, 2Kp30 DCI, 2Kp47.95 DCI, 2Kp48 DCI, 2Kp50 DCI, 2Kp59.94 DCI, 2Kp60 DCI, 2KPsF25 DCI, 2KPsF29.97 DCI, 2KPsF30 DCIUltra HD Video Standards: 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p47.95, 2160p48, 2160p50, 2160p59.94, 2160p604K Video Standards: 4Kp23.98 DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI, 4Kp48 DCI, 4Kp50 DCI, 4Kp59.94 DCI and 4Kp60 DCISDI Video Rates: SDI video connections are switchable between standard definition, 720p, 1080i, 1080p, 2K DCI, Ultra HD and 4K DCISDI Color Precision: 4:2:2SDI Color Space: YUVSDI Auto Switching: Automatically detects SD, HD, 2K DCI, Ultra HD and 4K DCI. Level A and B is automatically detected on 3G‑SDI input and user selectable on 3G‑SDI outputSMPTE 2110-20 (Uncompressed Video): IGMP v2SMPTE 2110-21 (Traffic Shaping): Sender: Narrow / Receiver: Narrow, Wide Synchronous, vocas.nl AsynchronousSMPTE 2110-30 (PCM): Audio Conformance level: Level CSMPTE 2110-40 (Ancillary Data): Full access to entire SMPTE ancillary data stream. Includes RP 188/SMPTE 12M-2, closed captioning and HDR static metadataCodec: Blackmagic IP10 codec used when converting 12G-SDI rates to 10G 2110 IP videoPrecision Time Protocol: IEEE 1588-2008 (PTP v2), ST 2059-1, ST 2059-2NMOS IS-04 Discovery and Registration: v1.3.2, Peer-to-peer via mDNS/DNS‑SDNMOS IS-05 Connection Management: v1.1.2NMOS BCP-002-01: Natural GroupingNMOS BCP-004-01: Receiver capabilitiesLED Indicators: 1 x IP Input Lock LED indicator light, 1 x SDI Input Lock LED indicator light, 1 x Tally LED indicator lightControl: Talkback button controls for Volume Up, Volume Down and Push to TalkTalkback: 5‑pin XLR talkback headset connection for talkback on channels 15/16 in the SDI and 2110 IP videoLive Tally Indicator: Tally LED indicator lightOperating Systems: Mac 13.0 Ventura, Mac 14.0 Sonoma or later, Windows 10 and 11Power Supply: 1 x +12V DC external universal power supply with locking 5.5mm barrel Jack plus international socket adapters for most countries / 1 x RJ45 Ethernet connector for power from PoE++ power suppliesOperational Voltage Range: 12 - 16 VPower Usage: 18WOperating Temperature: 5° to 40° CStorage Temperature: -20° to 45° CRelative Humidity: 0% to 90% non‑condensing

Blackmagic 2110 IP Mini BiDirect 12G SFP SKU: CONVNVIPF/IP/12GSFP Blackmagic Design has a wide range of SMPTE-2110 IP video products, including converters, video monitors, audio monitors and even cameras. Plus they support Ultra HD using low cost 10G Ethernet. Most converter models are bidirectional, so they're fantastic to use on cameras when customers need an extra program return. The rack mount models have an elegant design with a color LCD for monitoring, menus and diagnostics. All models conform to the SMPTE ST-2110 standard for IP video, including PTP clocks and even NMOS support so customers can make connections using a video router panel. Blackmagic 2110 IP Mini BiDirect 12G SFP lets you convert broadcast cameras with SDI connections to SMPTE-2110 IP video systems over long distances using optical fiber. Its 12G-SDI connection supports SD, HD and Ultra HD standards up to 2160p60 and even handles the SDI program return. Blackmagic 2110 IP Mini BiDirect 12G SFP also has a 5 pin XLR talkback headset connection with talkback volume control and a press to talk button. The SFP socket will accept 10G Ethernet, 3G-SDI, 6G-SDI or 12G-SDI optical modules. It also includes a 12 DC power supply. 2110 IP Converters FeaturesAll converters conform to the SMPTE-2110 IP video standardChoose between Mini Converter or rack mount modelsUses readily available 10G Ethernet for low cost installationRe-syncs SDI inputs to a common PTP clockIncludes NMOS Protocol for building a virtual routerLow latency, open standard Blackmagic IP10 codecSupports all SD, HD and Ultra HD formats up to 2160p60

Blackmagic 2110 IP Converter 3x3G SKU: CONVNVIPA3/3G The new Blackmagic 2110 IP Converter 3x3G lets you convert 3 separate 3G-SDI devices to 2110 IP video systems. That’s because its 10G Ethernet connection can handle 3 separate video channels at the same time. Plus each channel has independent SDI inputs and SDI outputs, so you could even connect to 6 completely different SDI devices! All 3G-SDI inputs feature loop outputs so you can install the converter in line within existing SDI systems. There's also a reference output, timed to the 2110 PTP clock! Blackmagic 2110 IP Converter 3x3G includes an elegant front panel with a color LCD for monitoring, menus and diagnostics. You can even route IP inputs from the panel!