CamDo SolarUp 180312k

CamDo DryX The CamDo DryX enclosure is the same enclosure that ships with our SolarX Enclosure Power System includes a battery pack (44 Wh Battery) but does not iclude solar panel. Our outdoor enclosures are fitted with a sturdy aluminum mounting bracket that contains multiple 1/4"-20 threaded holes on the top, back, and bottom for use with standard tripod screws. It also has 2 slots at the back for using straps to attach the enclosure to a pole. CamDo offers a sturdy swivel mount for easy mounting to a pole or flat surface Inside the enclosure contains an aluminum bracket designed to tightly fit the GoPro HERO3, HERO4, HERO5 Black, and HERO5 Session cameras with a CamDo time lapse camera controller such as BlinkX. The interior has space for extra batteries or other accessories. One accessory that can be used with BlinkX or Blink is our X-Band Motion Sensor that can detect motion through the walls of the enclosure without requiring extra opening for the signal to pass through. The enclosure is fitted with a standard 67mm filter adapter and a neutral density UV optical glass “digital filter” is included. You can replace the filter with your filter of choice. These enclosures are not submersible. The degree of water resistance depends on the mounting method and options selected. They are suitable for general outdoor use. Enclosure Specifications Material: NK-7 Polypropylene ResinExterior Dimensions: 231 mm x 173 mm x 97 mmInterior Dimensions: 188 mm x 124 mm x 79 mmPadlock holes: 2 at top to secure the contents.Mounts: Aluminum bracket with tripod holes (¼"-20) on the top (2x 1.75"spacing), back (3x 2.75"spacing), and bottom (1x centered), as well as two 1.1" slots (2.5"spacing) at back for strapping to a post.

CamDo Swivel Mount Kit for Outdoor and Solar Enclosures The marine grade aluminum CamDo Swivel Mount Kit consists of a 6" long straight swing arm on a vertical mounting base for attachment to a flat or rounded surface such as a wall or post. The opposing end is a ball socket used with the 1.5" ball mount plate that can be attached to our Solar or DRY outdoor enclosure for ultimate aiming flexibility. The swing arm pivot allows for full 360-degree rotation and the ball and socket system allows a 360-degree rotation with a 180-degree pivot. There is an insert on the vertical mounting plate to allow solid mounting to a flat surface like a building or a rounded surface such as a pole or rail. In the box Swivel Arm bracketBall mount plate with 2.75" hole spacing for attachment to our Solar/Dry enclosure with associated 1/4"-20 screwsSet of hex nuts that are used as optional replacement for the hand cranked knobs. Once aiming is complete, when using the hex nuts, the use of a tool to loosen is required; this improves security and reduces the chances of tampering

CamDo SolarX Solar Upgrade Kit The CamDo Solar Kit adds an extra 9W solar panel to give you a total of 18W of power (2 x 9W panels) when using SolarX. It comes with all necessary attachments (ball arm, socket) and wiring to get up and running in no time with your existing CamDo SolarX. The SolarX outdoor enclosure is fitted with a sturdy aluminum mounting bracket that contains multiple 1/4"-20 threaded holes on the top, back, and bottom for use with standard tripod screws. Each solar panel is simply attached to this bracket using the included 1/4"-20 ball mount and associated socket arm so the panel can be positioned for optimum sun exposure. The 9W Solar Panel Kit includes a "(2Fx1M) Y-cable" that can be used to connect two solar panels to simultaneously charge a single V44 battery (included with SolarX). Alternatively, our outdoor housings can fit two V44 battery packs that can each be charged from a separate solar panel. So if one panel gets dirty or covered by shadow, the second panel will continue to work hard for your project. 9 Watt Solar Panel Dimensions: 220 mm x 255 mm x 5mm Weight: 360g (12.75oz)Peak Current: 1500mAPeak Power: 9.0WCell Type: MonocrystallineOpen Circuit Voltage: 7.0VPeak Voltage: 6.0VCell Efficiency: 19% What's in the box 1 x 9W solar panelCabling to connect two solar panels simultaneously (2Fx1M Y-cable)Ball mountBall arm

CamDo UpBlink SKU: 180278 CamDo UpBlink is a time Lapse controller for GoPro HERO5 -HERO8 / Sony DSC-RX0 with image Upload to CloudX Pro. Web-app, low power & WiFi brings: Easy to use, 4K time lapse for less! Use UpBlink to achieve long term time lapse and/or motion detection for your next project. Just plug it into your GoPro and use the UpBlink app to connect and configure separate schedules (including email scheduling) using a smartphone, tablet, computer, or any WiFi enabled device which has a web browser (app connection is directly with UpBlink so no cell service or internet connection required). Features Compatible with GoPro HERO5 BlackCamera WiFi Control Time and Date Scheduling (Allows camera to be set up before a project starts without consuming power to capture unneeded footage or adjusting interval times between set dates)On board Real Time Clock (Holds date/time if left unpowered for up to 2 years)Improved user interface (web based setup on your device)Universal strap mount allows for mounting in multiple ways Simple Configuration for Complete Control Intuitive web interface makes scheduling UpBlink a breeze.Customize a daily or weekly schedule to program up to 4 separate schedules for time lapse using photo, day, night, burst or video modes.Set flexible cloud upload schedules powerLow Power Consumption UpBlink powers your GoPro camera down between intervals, increasing the battery life significantly and giving you the ability to undertake long term time lapse sequences. emailCloudX Image Upload and Email Notifications Using CloudX, receive an e-mail every day to confirm your system is still operating - how many shots were taken since the last e-mail, what is the battery status, what is the SD card status - everything to give you peace of mind your system is working. Set a cloud upload scheduleUpload all images or flexible upload options to conserve bandwidth including: Lower resolution uploads / Latest image only photo_cameraNo Camera Firmware Update Required UpBlink doesn’t require any special camera firmware update. Just ensure your HERO5 Black camera is up to date with the latest firmware from the GoPro website or through the GoPro App for iOS and Android. settings_remoteMotion Detection (coming soon) Motion detection schedules can be programmed to only be active only during certain times of day to avoid capturing unneeded footage and conserve power.Motion detection can be used independently and simultaneously with time lapse schedules.Motion detectors compatible with UpBlink. Please contact CamDo to confirm when this feature will be available. date_rangeLong Term Time Lapse Couple UpBlink with CAMDO SolarX or CAMDO DryX for long term time lapse solutions.