CamDo SolarX solar power enclosure for GoPro / Sony

CamDo Blink CamDo Blink Time Lapse Controller is CamDo’s latest GoPro time lapse and motion detection controller for HERO4 cameras. It is a low power, WiFi enabled GoPro accessory that unlocks the full potential of the GoPro camera. Use CamDo Blink to achieve long term time lapse or motion detection for your next project. Just plug it into your GoPro and use the Blink app to connect and configure up to 10 separate time lapse schedules using a smartphone, tablet, computer, or any WiFi enabled device which has a web browser (no cell service or internet connection required). Quick & Easy Set-Up Get Blink up and running in less than 2 minutes. While typically used with our Outdoor Enclosures to also house extra battery packs, Blink will also fit inside the extended backdoors included in the GoPro Back Door Kit that are designed to fit GoPro BacPac accessories. Simple Configuration for Complete Control Intuitive web interface makes scheduling Blink a breeze. Customize a daily or weekly schedule to program up to 10 separate schedules for either time lapse or motion detection in photo, day, night, burst or video modes. Low Power Consumption Blink powers your GoPro camera down between intervals, increasing the battery life significantly and giving you the ability to undertake long term time lapse sequences. Blink is powered from the GoPro battery and does not require a separate power source. Email Home with Blink Email Blink can e-mail you every day to confirm it is still operating - how many shots were taken since the last e-mail, what is the battery status, what is the SD card status - everything to give you peace of mind your system is working. No Camera Firmware Update Required Blink doesn’t require a complicated camera firmware update process. Just ensure your HERO3+ or HERO4 camera is up to date with the latest firmware from the GoPro website or through the GoPro App for iOS and Android. Motion Detection Motion detection schedules can be programmed to only be active only during certain times of day to avoid capturing unneeded footage and conserve power Blink Overview 1. USB: Blink can be powered from the GoPro camera's battery through the HERO Port and does not need to be powered separately. Blink's USB interface is used for firmware updates2. LED: This provides feedback to the user during operation, as well as for firmware updates3. Port 1: This input accepts the Wired Remote or other custom trigger. The Wired Remote is used to turn WiFi On/Off, as well as provide LED feedback during operation.4. Port 2: The X-Band Motion Detector accessory plugs directly into this input. Support for other accessories such as a PIR sensor will be added in the future. Do not connect anything other than the motion detector cable into this input!In the box A. CamDo Blink B. Wired Remote C. USB OTG Cable (for future updates) D. X-Band Motion Detector (optional purchase) 

CamDo Bullet Wired Remote for GoPro Hero4 / Hero3+ Using CamDo Bullet is very simple. Just plug it into the camera and press the button on the Wired Remote. If the camera is off, it will turn on. If the camera is on and in photo mode, it will act as if you have hit the camera shutter button and take a photo. If in video mode it will start or stop video. Holding the button for more than 3 seconds will turn the camera off. The CamDo Bullet is a low power GoPro accessory for the HERO3+ and HERO4 cameras that allows you to control the GoPro camera's power and shutter functions through the use of a wired push button remote. Bullet can be used to control a single camera or multiple cameras using a single remote. Each Bullet is purchased separately and has an input and output port, allowing the boards to be daisy-chained so that any number of cameras can be triggered simultaneously. Each Bullet comes with a 1 foot patch cable for daisy-chaining between Bullet boards. If the cameras need to be placed further apart or you need a longer cable between the first bullet and the push button remote, we are offering extension cables at 3ft, 10ft, and 25ft lengths. BULLET DOES NOT INCLUDE A PUSH BUTTON REMOTE. Be sure to also purchase a LED Wired Remote as a trigger for each set of Bullets.

CamDo BlinkX Use CamDo BlinkX to achieve long term time lapse and/or motion detection for your next project. Just plug it into your GoPro HERO5, HERO5 Session, HERO6, HERO7, HERO8 and use the BlinkX app to connect and configure up to 9 separate time lapse schedules using a smartphone, tablet, computer, or any WiFi enabled device which has a web browser (no cell service or internet connection required).  A WiFi network with internet access is only required if you would like to use our optional Blink Email feature to provide daily status updates straight to your inbox. If you are looking at a long term time lapse you may be interested in the general time lapse and construction time lapse packs which incorporate an external solar system for long term deployment or where finding a power supply is difficult or expensive. Here are all the new advantages of BlinkX over Blink Compatible with GoPro HERO5, HERO5 Session, HERO6, HERO7, HERO8Camera WiFi Control (for manual download of data or aligning setup through GoPro app)Time and Date Scheduling (Allows camera to be set up before a project starts without wasting images/power)In-built WiFi enable button (no longer need a wired remote trigger)On board Real Time Clock (Holds date/time if left unpowered for up to 2 years)Lower Power Consumption (~10x power savings in between schedules)Improved user interface (web based setup on your device)Simplified poweringUniversal strap mount (allows for mounting in multiple ways)

CamDo Swivel Mount Kit for Outdoor and Solar Enclosures The marine grade aluminum CamDo Swivel Mount Kit consists of a 6" long straight swing arm on a vertical mounting base for attachment to a flat or rounded surface such as a wall or post. The opposing end is a ball socket used with the 1.5" ball mount plate that can be attached to our Solar or DRY outdoor enclosure for ultimate aiming flexibility. The swing arm pivot allows for full 360-degree rotation and the ball and socket system allows a 360-degree rotation with a 180-degree pivot. There is an insert on the vertical mounting plate to allow solid mounting to a flat surface like a building or a rounded surface such as a pole or rail. In the box Swivel Arm bracketBall mount plate with 2.75" hole spacing for attachment to our Solar/Dry enclosure with associated 1/4"-20 screwsSet of hex nuts that are used as optional replacement for the hand cranked knobs. Once aiming is complete, when using the hex nuts, the use of a tool to loosen is required; this improves security and reduces the chances of tampering

CamDo UpBlink SKU: 180278 CamDo UpBlink is a time Lapse controller for GoPro HERO5 -HERO8 / Sony DSC-RX0 with image Upload to CloudX Pro. Web-app, low power & WiFi brings: Easy to use, 4K time lapse for less! Use UpBlink to achieve long term time lapse and/or motion detection for your next project. Just plug it into your GoPro and use the UpBlink app to connect and configure separate schedules (including email scheduling) using a smartphone, tablet, computer, or any WiFi enabled device which has a web browser (app connection is directly with UpBlink so no cell service or internet connection required). Features Compatible with GoPro HERO5 BlackCamera WiFi Control Time and Date Scheduling (Allows camera to be set up before a project starts without consuming power to capture unneeded footage or adjusting interval times between set dates)On board Real Time Clock (Holds date/time if left unpowered for up to 2 years)Improved user interface (web based setup on your device)Universal strap mount allows for mounting in multiple ways Simple Configuration for Complete Control Intuitive web interface makes scheduling UpBlink a breeze.Customize a daily or weekly schedule to program up to 4 separate schedules for time lapse using photo, day, night, burst or video modes.Set flexible cloud upload schedules powerLow Power Consumption UpBlink powers your GoPro camera down between intervals, increasing the battery life significantly and giving you the ability to undertake long term time lapse sequences. emailCloudX Image Upload and Email Notifications Using CloudX, receive an e-mail every day to confirm your system is still operating - how many shots were taken since the last e-mail, what is the battery status, what is the SD card status - everything to give you peace of mind your system is working. Set a cloud upload scheduleUpload all images or flexible upload options to conserve bandwidth including: Lower resolution uploads / Latest image only photo_cameraNo Camera Firmware Update Required UpBlink doesn’t require any special camera firmware update. Just ensure your HERO5 Black camera is up to date with the latest firmware from the GoPro website or through the GoPro App for iOS and Android. settings_remoteMotion Detection (coming soon) Motion detection schedules can be programmed to only be active only during certain times of day to avoid capturing unneeded footage and conserve power.Motion detection can be used independently and simultaneously with time lapse schedules.Motion detectors compatible with UpBlink. Please contact CamDo to confirm when this feature will be available. date_rangeLong Term Time Lapse Couple UpBlink with CAMDO SolarX or CAMDO DryX for long term time lapse solutions.