Hawk-Woods VLM-FS5 Sony FS5 4K Mini V-Lok Camera mount
Hawk-Woods VLM-FS5
Hawk-Woods VLM-FS5 plate will fit directly into the original battery port of the Sony FS5 via a mechanical BPU battery fitting. The camera needs to be powered through the provided fixed Sony EX flying lead, which is regulated to 12 volts due to the camera's DC input range.
- 2x Power-con outputs are also provided, which are regulated to 12 volts.
- The total power available for the FS5 and further accessories is 6A overall.
- Please note when using this adapter, the Ethernet port is blocked.
Accessory Items
Free shipping
Hawk-Woods VL-SV1 Sony Venice V-Lok Camera Adaptor
PLN 2,408.34*
net: PLN 1,958.00
Hawk-Woods VL-SV1
SKU: VL-SV1
The Hawk-Woods VL-SV1 has been designed to meet all the demands of powering your Sony Venice camera and Sony R7 recorder. The VL-SV1 comes with many features that the end user will find very comforting, firstly a new 100% lock-in system has been added to the SV1 which you will find in the product carton, this eliminates the issue of the adaptor or battery lifting of the Sonys Venice/R7 V-Mount fitting under minimal pressure, providing peace of mind that continuous power is provided to the camera. Secondly the SV1 offers a dual input system to cope with the demanding power requirements of the Venice, this allows the user to be able to automatically hot swap between a large capacity floor battery or the V-Lok battery fitted to the SV1. The primary power is taken firstly from the floor battery (Input 1) and will switch once discharged to the mounted V-Lok battery (Input 2) without loss of power, this is monitored by a dual LED system.
2 x D-Tap outputs (11-17v)1 x Lemo 2-Pin (11-17v) 2 x RS Fischer 3-Pin (24v) (Start/Start enabled) 1 x Lemo 5-Pin (for use with wooden cameras D-box Start/Stop enabled)Weight: 426gSize: 11 x 11.8 x 4.7 cm
Free shipping
Hawk-Woods VL-FS7 Sony FS7 V-Lok Camera Adaptor
PLN 1,204.17*
net: PLN 979.00
Hawk-Woods Sony FS7 V-Lok Camera Adaptor
SKU: VL-FS7
The Hawk-Woods VL-FS7 is a direct V-Lok fitting for Sony PXW-FS7 camera allowing the user to use high powered V-Lok batteries rather than BPU batteries which are the standard battery for the FS7 camera. The VL-FS7 adaptor attaches via the lock in mechanism in the FS7s battery compartment and then finally screwed to the top of the camera body to secure in place. Users have the benefit of 5x Power-con (D-Tap) outputs 11 - 17 volts allowing further equipment/accessories to be powered from the VL-FS7. Power is provided via a short DC Sony EX Jack cable through the FS7s DC Input.
Weight: 240gSize: 9 x 14 x 8 cmInput: Sony EX DC JackOutput: 5x Power-Con (11-17v)Number of D-Taps: 5