Skip to main content
Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Showroom in Warsaw +48 299 06 61

Hollyland Wireless Tally System 4 Lights Set

Hollyland Wireless Tally System

Wireless Tally System is a highly compatible Tally device with multiple ports and a powerful sequence learning function. With its long battery life and over 800m transmission range, it provides a stable and prolonged shooting experience. The system utilizes adaptive frequency hopping technology and supports up to 16 Tally channels, significantly enhancing work efficiency. Hollyland Wireless Tally System offers multiple port options, including DB25, RJ45, and USB-C, to support the connection to various switchers incl. solutions from Blackmagic Design, Panasonic, Datavideo, Sony, Roland, vMix, and DeviceWell. A single battery provides a life of over 8 hours, surpassing the working duration requirements for most usage scenarios. Even if the Tally device runs low on battery during operation, you can immediately replace it to ensure uninterrupted usage. Extremely lightweight, the Tally lights only weigh 98.5g (with battery)!

Set of 4 lights

  • 4x Tally Light
  • 1x Tally Station
  • 1x Tally Hard-Shell Case
  • 2x DC Power Adapter
  • 2x Wireless Tally System Antenna
  • 1x 8-slot Charging Base
  • 4x Li-ion Battery Pack 700
  • 1x USB-A to USB-C Cable
  • 1x Number Stickers

Set of 8 lights

  • 8x Tally Light
  • 1x Tally Station
  • 1x Tally Hard-Shell Case
  • 2x DC Power Adapter
  • 2x Wireless Tally System Antenna
  • 1x 8-slot Charging Base
  • 8x Li-ion Battery Pack 700
  • 1x USB-A to USB-C Cable
  • 1x Number Stickers
Related links of the manufacturer

Similar products

Free shipping
Cuebi Wireless Tally Light
Cuebi Tally Light: CB-LIGHT1-6P (Set of 6)
Cuebi Wireless Tally Light Cuebi Light is 100% IP-based and connects over a standard WiFi network to a switcher. Available options: CB-LIGHT1-2P  - Cuebi Tally Light Set of 2CB-LIGHT1-4P - Cuebi Tally Light Set of 4CB-LIGHT1-6P - Cuebi Tally Light Set of 6 COMPATIBILITY Blackmagic ATEM, NewTek TriCaster, Roland Smart Tally, vMix, Ross Video, Panasonic, Streamstar and any broadcast system supporting the TSL UMD v3.1 or v5.0 protocol. AFFORDABLE Cuebi is the most compact and affordable wireless tally system on the market today. FUTURE PROOF Firmware-updateable, so more and more switchers and systems will be supported, and remain supported. EXTERNAL TRIGGERING Connect a small LED to fit inside the camera's eye piece or trigger a viewfinder's built-in tally light. AUTONOMOUS The Cuebi Lights work together and talk directly to the switcher, there is no separate base station. Highlights SMALL - No bigger than a pack of matches and it looks awesome on any cameraLIGHT - Weighing only 10gr, Cuebi Light will not limit your movementEASY -  Slides right into a camera's accessory-shoe, and connects with the switcher via WiFi

Variants from PLN 1,910.25*
PLN 4,920.68*
net: PLN 4,000.55
Free shipping
Cuebi Wireless Tally Light
Cuebi Tally Light: CB-LIGHT1-4P (Set of 4)
Cuebi Wireless Tally Light Cuebi Light is 100% IP-based and connects over a standard WiFi network to a switcher. Available options: CB-LIGHT1-2P  - Cuebi Tally Light Set of 2CB-LIGHT1-4P - Cuebi Tally Light Set of 4CB-LIGHT1-6P - Cuebi Tally Light Set of 6 COMPATIBILITY Blackmagic ATEM, NewTek TriCaster, Roland Smart Tally, vMix, Ross Video, Panasonic, Streamstar and any broadcast system supporting the TSL UMD v3.1 or v5.0 protocol. AFFORDABLE Cuebi is the most compact and affordable wireless tally system on the market today. FUTURE PROOF Firmware-updateable, so more and more switchers and systems will be supported, and remain supported. EXTERNAL TRIGGERING Connect a small LED to fit inside the camera's eye piece or trigger a viewfinder's built-in tally light. AUTONOMOUS The Cuebi Lights work together and talk directly to the switcher, there is no separate base station. Highlights SMALL - No bigger than a pack of matches and it looks awesome on any cameraLIGHT - Weighing only 10gr, Cuebi Light will not limit your movementEASY -  Slides right into a camera's accessory-shoe, and connects with the switcher via WiFi

Variants from PLN 1,910.25*
PLN 3,278.63*
net: PLN 2,665.55
Free shipping
Cuebi Wireless Tally Light
Cuebi Tally Light: CB-LIGHT1-2P (Set of 2)
Cuebi Wireless Tally Light Cuebi Light is 100% IP-based and connects over a standard WiFi network to a switcher. Available options: CB-LIGHT1-2P  - Cuebi Tally Light Set of 2CB-LIGHT1-4P - Cuebi Tally Light Set of 4CB-LIGHT1-6P - Cuebi Tally Light Set of 6 COMPATIBILITY Blackmagic ATEM, NewTek TriCaster, Roland Smart Tally, vMix, Ross Video, Panasonic, Streamstar and any broadcast system supporting the TSL UMD v3.1 or v5.0 protocol. AFFORDABLE Cuebi is the most compact and affordable wireless tally system on the market today. FUTURE PROOF Firmware-updateable, so more and more switchers and systems will be supported, and remain supported. EXTERNAL TRIGGERING Connect a small LED to fit inside the camera's eye piece or trigger a viewfinder's built-in tally light. AUTONOMOUS The Cuebi Lights work together and talk directly to the switcher, there is no separate base station. Highlights SMALL - No bigger than a pack of matches and it looks awesome on any cameraLIGHT - Weighing only 10gr, Cuebi Light will not limit your movementEASY -  Slides right into a camera's accessory-shoe, and connects with the switcher via WiFi

PLN 1,910.25*
net: PLN 1,553.05
Free shipping
AVMATRIX TS3019 Wireless Multi-Camera Tally Light System (4 x Tally Lamps)
AVMATRIX TS3019: TS3019-4
AVMATRIX Wireless Multi-Camera Tally Light System Display the on-air status of each camera in your set configuration with the AVMATRIX Wireless Multi-Camera Tally Light System with 4/6/8 tally lamps. The system can wirelessly communicate from up to 200m away. Multiple interface connections on the tally box—from GPIO and USB Type-C to RS-232 and RS-485—create wide compatibility with various switchers and vMix software for integration with your preexisting gear setup. An included antenna can attach to the box to improve its signal. Each tally light has a front and rear indicator light for its on-air status, as well as indicators to display the wireless signal strength and battery level. They can be powered via USB Type-C input or with a separately available 18650 lithium-ion battery. The bottom of each lamp has a 1/4"-20 thread for installation with a hot shoe to the top of a camera. Five USB Type-C cords, a GPIO connector, a power adapter, and a carrying case complete the system's accessories. Features Support 433Mhz wireless or wired tally connectionUp to 200m wireless connection distance (line-of-sight)The tally box with multiple interfaces including GPIO/USB/RS-485/RS-232GPIO compatible with AVMATRIX and other video switchersCompatible with VMix via USB type-cWireless PTZ camera control via RS-232/RS-485 pass-through Up to 16 tally lamps can be supportedBoth front and rear indicators on the lamps with 4-level adjustable brightnessVisible signal strength and battery status on the tally lampThe Tally lamp can be powered by USB type-c or 18650 Li-ion battery1/4 inch hot shoe for tally lamp installation Tally Box GPIO, USB Type-C, RS-485, and RS-232 interface1-pin antenna inputGPIO compatible with AVMATRIX, Roland, Sony, NewTek, Panasonic, Datavideo, or other tally converter boxesPTZ remote control via RS-232/RS-485 pass-through USB Type-C input compatible with vMix softwareCan support up to 16 tally lamps Tally Lamp PTZ camera connection via RS-485 inputFront and rear indicators with four-level brightness adjustmentSignal strength and battery status indicatorsPowered via USB Type-C input or with separately available 18650 lithium-ion battery1/4"-20 thread for installation of hot shoe

PLN 2,183.93*
net: PLN 1,775.55
Free shipping
AVMATRIX TS3019 Wireless Multi-Camera Tally Light System (6 x Tally Lamps)
AVMATRIX TS3019: TS3019-6
AVMATRIX Wireless Multi-Camera Tally Light System Display the on-air status of each camera in your set configuration with the AVMATRIX Wireless Multi-Camera Tally Light System with 4/6/8 tally lamps. The system can wirelessly communicate from up to 200m away. Multiple interface connections on the tally box—from GPIO and USB Type-C to RS-232 and RS-485—create wide compatibility with various switchers and vMix software for integration with your preexisting gear setup. An included antenna can attach to the box to improve its signal. Each tally light has a front and rear indicator light for its on-air status, as well as indicators to display the wireless signal strength and battery level. They can be powered via USB Type-C input or with a separately available 18650 lithium-ion battery. The bottom of each lamp has a 1/4"-20 thread for installation with a hot shoe to the top of a camera. Five USB Type-C cords, a GPIO connector, a power adapter, and a carrying case complete the system's accessories. Features Support 433Mhz wireless or wired tally connectionUp to 200m wireless connection distance (line-of-sight)The tally box with multiple interfaces including GPIO/USB/RS-485/RS-232GPIO compatible with AVMATRIX and other video switchersCompatible with VMix via USB type-cWireless PTZ camera control via RS-232/RS-485 pass-through Up to 16 tally lamps can be supportedBoth front and rear indicators on the lamps with 4-level adjustable brightnessVisible signal strength and battery status on the tally lampThe Tally lamp can be powered by USB type-c or 18650 Li-ion battery1/4 inch hot shoe for tally lamp installation Tally Box GPIO, USB Type-C, RS-485, and RS-232 interface1-pin antenna inputGPIO compatible with AVMATRIX, Roland, Sony, NewTek, Panasonic, Datavideo, or other tally converter boxesPTZ remote control via RS-232/RS-485 pass-through USB Type-C input compatible with vMix softwareCan support up to 16 tally lamps Tally Lamp PTZ camera connection via RS-485 inputFront and rear indicators with four-level brightness adjustmentSignal strength and battery status indicatorsPowered via USB Type-C input or with separately available 18650 lithium-ion battery1/4"-20 thread for installation of hot shoe

Variants from PLN 2,183.93*
PLN 3,004.95*
net: PLN 2,443.05
Free shipping
AVMATRIX TS3019 Wireless Multi-Camera Tally Light System (8 x Tally Lamps)
AVMATRIX TS3019: TS3019-8
AVMATRIX Wireless Multi-Camera Tally Light System Display the on-air status of each camera in your set configuration with the AVMATRIX Wireless Multi-Camera Tally Light System with 4/6/8 tally lamps. The system can wirelessly communicate from up to 200m away. Multiple interface connections on the tally box—from GPIO and USB Type-C to RS-232 and RS-485—create wide compatibility with various switchers and vMix software for integration with your preexisting gear setup. An included antenna can attach to the box to improve its signal. Each tally light has a front and rear indicator light for its on-air status, as well as indicators to display the wireless signal strength and battery level. They can be powered via USB Type-C input or with a separately available 18650 lithium-ion battery. The bottom of each lamp has a 1/4"-20 thread for installation with a hot shoe to the top of a camera. Five USB Type-C cords, a GPIO connector, a power adapter, and a carrying case complete the system's accessories. Features Support 433Mhz wireless or wired tally connectionUp to 200m wireless connection distance (line-of-sight)The tally box with multiple interfaces including GPIO/USB/RS-485/RS-232GPIO compatible with AVMATRIX and other video switchersCompatible with VMix via USB type-cWireless PTZ camera control via RS-232/RS-485 pass-through Up to 16 tally lamps can be supportedBoth front and rear indicators on the lamps with 4-level adjustable brightnessVisible signal strength and battery status on the tally lampThe Tally lamp can be powered by USB type-c or 18650 Li-ion battery1/4 inch hot shoe for tally lamp installation Tally Box GPIO, USB Type-C, RS-485, and RS-232 interface1-pin antenna inputGPIO compatible with AVMATRIX, Roland, Sony, NewTek, Panasonic, Datavideo, or other tally converter boxesPTZ remote control via RS-232/RS-485 pass-through USB Type-C input compatible with vMix softwareCan support up to 16 tally lamps Tally Lamp PTZ camera connection via RS-485 inputFront and rear indicators with four-level brightness adjustmentSignal strength and battery status indicatorsPowered via USB Type-C input or with separately available 18650 lithium-ion battery1/4"-20 thread for installation of hot shoe

Variants from PLN 2,183.93*
PLN 3,825.98*
net: PLN 3,110.55
Pay with:
We ship with: