MID49 Mid Kit for Sony Burano

MID49 Top Plate (Sony Burano) SKU: M49-CAG-SON-TOP Top Plate (Sony Burano) attaches to the top of the camera and provides 1/4-20 and 3/8-16 threaded holes with ARRI accessory pins, M4x20mm ARRI standard threaded holes, 1/4-20 holes for the Burano's included handle and the optional FX9 control handle. When using the FX9 handle, an upcoming connector bridge will be available from MID49 and attach to the rear opening on the top plate. Center ARCA dovetail clamp allows for attachment of the ARCA Top Handle, ARCA Top Plate, and Gimbal Adapter Plates for quick change between handheld and studio modes. Side 3/8-16 ARRI accessory mounts can accept Cage NATO Side Arm (ARRI 3/8-16) for cage building. Burano tape hook and cable guide can be removed and installed on the top plate.

MID49 ARCA Top Handle SKU: M49-HAN-ATH ARCA Top Handle is a lightweight sliding camera handle that attaches to ARCA Top Mount (RED Komodo, Komodo-X, V-Raptor) and has 1/4-20 and 3/8-16 mounting holes with ARRI locating pins in standard spacing. M4x20mm threaded holes available on multiple sides for attaching Rod Bracket (15mm LW) or other ARRI M4 accessories. Hot shoe mount on the front and rear for on-camera lights, microphones, and other shoe accessories. Product Weight: 120gProduct Dimensions (WxLxH): 37 x 110 x 67mm

MID49 Sony Burano EVF Pivot Adaptor SKU: M49-MON-SON-EPA Sony Burano EVF Pivot Adapter allows the Burano LCD panel to switch from monitor configuration to viewfinder configuration without tools. Just grab and twist. Weight: 40gDimensions (WxLxH): 29 x 46 x 21 mm

MID49 Baseline 15mm LW (Sony Burano, FX6, Venice, Venice 2, Rialto, F55, F5 / Blackmagic URSA Mini, Mini Pro, Mini Pro 12K Baseplate)SKU: M49-BSL-LW0-AC12 Baseline 15mm LW (Sony FX6, Venice, Venice 2, Rialto, F55, F5 / Blackmagic URSA Mini, Mini Pro, Mini Pro 12K Baseplate) is a baseplate that holds 15mm lightweight rods at the correct distance from the center of the lens on the listed cameras. ARRI dovetail slot on the bottom attaches to the included Baseline ARRI Dovetail or other ARRI standard dovetails using a top-load locking mechanism. Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew. Baseline ARRI Dovetail is the included lower ARRI mounting plate which can attach to tripod plates using 1/4-20 or 3/8-16 screws or ARRI standard bridgeplates with centered or offset screw spacing. ARCA dovetail slot on top holds the included ARCA Dovetail and can be top-loaded, or installed from the back by sliding in. When sliding in from the back, a safety pin will engage with a pop when properly installed. Adjust the position, then lock the ratcheting thumbscrew. Top-loading can be achieved by loosening the thumbscrew, pulling out on the ratcheting knob, and turning the thumbscrew until ARCA clamp has opened fully. Reverse the process to tighten. Center screw slot on ARCA Dovetail accepts 1/4-20 and 3/8-16 mounting screws, and a vertical rod hole clamps included 1/4-20 lens support posts for adaptors like Metabones, etc. Individual components of this kit are also available: Baseline Core 15mm LW (0mm Platform Height)Baseline ARCA Dovetail (12mm Height)Baseline ARRI DovetailTechnical dataProduct Weight: 334gProduct Dimensions (WxLxH): 123 x 140 x 33mm

MID49 Cage NATO Side Arm (ARRI 3/8-16) SKU: M49-CAG-ARR-3TN Cage NATO Side Arm (ARRI 3/8-16) attaches to an ARRI 3/8-16 accessory mount and provides an ARRI Rosette adjustable NATO accessory rail with safety pins on each end. 1/4-20 and 3/8-16 with accessory pins also available. Great for attaching to Top Plate (Sony Burano), Upper Cages, and many third party accessories.

MID49 Single 15mm Rod Clamp (M4 x 20mm) SKU: M49-SRC-15 Single 15mm Rod Clamp (M4 x 20mm) attaches by two M4 screws spaced 20mm apart, center to center, and is great for attaching lens motors in a compact configuration. M4x20mm holes are found on MID49 cheeseplates, handles, audio breakouts, EXT breakouts, and rod clamps, as well as ARRI and many third-party accessories. Weight: 34gDimensions: 28 x 42 x 31mm