Zacuto 2 Pin Lemo Power & Video Cable with Power Switch
PLN 875.76*
net: PLN 712.00
Zacuto 2 Pin Lemo Power & Video Cable
SKU: Z-EPVC-PS
Zacuto has created a custom power and video cable with a power switch. It combines a BNC with a 2 pin Lemo to Power Tap (P-tap). The cable allows you to power the Gratical Eye and send the SDI signal from your camera with the BNC connector using one single cable. There is a power switch located on the p-tap to easily power on or off your Gratical Eye. The power is sent from a P-Tap via a 2 pin Lemo connection to the Gratical Eye. At 30“ long, it’s just the right length to accommodate most cameras and rigs on the market. A molded sheathing keeps cables neat, while the ends are free to be configured for your setup.
Zacuto 4 Pin Lemo Power & Video Cable with Power Switch
PLN 821.03*
net: PLN 667.50
Zacuto 4 Pin Lemo Power & Video Cable
SKU: Z-4PVC
Zacuto Z-4PVC is a custom power video cable with power switch combining a BNC with a 4 pin Lemo Compatible to powertap. This handy cable allows you to power the Kameleon and send the SDI signal from your camera with the BNC connector. A molded sheathing keeps cables neat, while the ends are free to be configured for your setup. This cable is covered under our one-year electronics warranty. The cable is 30" long.
Zacuto LP-E6 to D-Tap Cable
PLN 547.35*
net: PLN 445.00
Zacuto LP-E6 to D-Tap Cable
PT-ZAC-E6
The LP-E6 to D-Tap Power Cable allows you to power anything using a Canon LP-E6 battery with an external power source. Now you can power the line of Zacuto EVFs or your Canon 5D/7D with pro V-Mount or Anton Bauer batteries.
Input Voltage; 10-24vOutput Voltage; 8VOutput current; 2ACoiled length 18", extension 48"Emulator chip to convey battery status based on input voltage