RigWheels 75mm Ball Head Adapter Pro

RigWheels Passport 2 SKU: PCD2 The Passport 2 Slider/Dolly System is tailor made for traveling professionals and remote on-location production. The all-in-one design and rock solid build quality make the Passport 2 Slider/Dolly system ideal for international documentary and network news style production where larger/heavier camera systems (up to 100 pounds) are being used and a stable, reliable platform is needed. The Passport 2 has dedicated (screw in) tripod-head adapters which allow for more range-of-moting for leveling your head as well as quicker setup. The entire RigWheels Passport 2 kit is flight ready at 50lbs (23kg) an won’t incur expensive excess charges. 6.3′ (1.95m) of track collapse into 19″ sections that pack along with the slider carriage, end-brackets and ball-head adapters into the included custom Pelican 1610 protector case (with wheels & handle). The track/tubes are the strongest and most accurate collapsable rail that we have seen on the market. Constructed from high-grade 6061 aluminum for rigidity and machined to a tolerance of .001″, sections of track connect seamlessly via threaded connectors (you will not notice a “bump” when rolling over them). The 19″ sections are interchangeable with our larger 40″ PortaRail systems so if longer range is needed, you can always add more length. At the included 6.3′ length, the rails have less than 1/8″ of flex with a 40lb load placed at the center. Transporting long pipe or tube for a suspended rail system like this has been prohibitive in the past for both cost and convenience reasons. Our goal in designing this system was to provide a professional solution for traveling production that does not require carrying additional bags or a bunch of extra hardware and stands to operate. The all-in-one design of the Passport slider/dolly can save $100 or more per trip in just checked bags. Portable dolly systems where track is placed on the ground have achieved this in the past but the Passport suspended rail dolly offers a lot more flexibility in where and how you can use it such as on uneven terrain or placing the system over objects. One of the practical design elements of the carriage is that it can be used as a high-hat without any reconfiguration. Just jump the entire camera and carriage off the rails and place it wherever you like. Like all of RigWheels products, the Passport is multi-function and the included components can be used to configure the RigSkate tabletop skater. In the box 1 x RigPlate Pro2 x RigAxle 4 x Inline Wheel 4 x Longboard Wheel 8 x 19″ PortaRail 1pc 8 x PortaRail Connector 16 x Rubber End Caps 1 x Passport Camera Dolly Case 2 x Baby Junior Adapter 2 x 18″ Cross Bar 4 x Variable Size Pipe Clamp 1 x 100mm Ball Adapter Pro 1 x 75mm Ball Adapter Pro 1 X Flat Adapter for RigPlate Pro 4 x 3” Stand Off 8 x 3 Prong Knob – 5/16-18″ 4 x 3 Prong Knob – 1/4-20″ 4 x Long 5/16″ Wheel Spacer 4 x 5/16″ Bolt – 3-1/2″ Long 4 x 5/16″ Bolt – 1-1/4″ Long 12 x 5/16″ Washer 3 x 3/8″ Bolt – 3/4″ Long 3 x 3/8″ Washer 2 x 3/8″ Split Washer 4 x Wing Nut – 5/16″

RigWheels Camera Ladder Mount We’ve all seen the typical setup, an old hi-hat with the wooden base attached to a ladder with spring-clamps or C-clamps. Here is a much more solid, clean and professional way to accomplish the task of getting a video camera up onto of a ladder. The 75mm, 100mm and Mitchell options come with two sets of stand-offs to accommodate different types of ladders. As you can see in the photo, both sets of stand-offs are needed to get above the top of the ladder so the camera movement would not be obstructed. 2 sets of connecting bolts are included with all options as the steps on some ladders are larger than others. Flat Mounting Plates Only Two RigPlates with the connecting hardware. This would usually be used for still photography or locked off shots using a head that can attach via a 3/8″ bolt. 75mm Ball Head Adapter Camera Ladder Mount for 75mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.100mm Ball Head Adapter Camera Ladder Mount for 100mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.Mitchell Head Adapter Camera Ladder Mount for Mitchell Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.