RigWheels PTZ-OI-PC PTZ Camera Overhead Vibration Isolator with Pipe Clamps

RigWheels PT-Zero Vibration Isolator Upright

RigWheels PT-Zero Upright The PT-Zero looks similar to the previous PTZ isolators however, there is a lot more isolation happening. We’ve added more than 30 new isolation components which dramatically increases the degree of isolation possible. We’ve also added more mounting and positioning options. We’ve made it much more easy to install the PT-Zero than the previous isolators. The PT-Zero uses a target weight range of 3,62-5,44 kg. Certainly, there are lots of quality PTZ cameras that are lighter than this so we have created weights that can be added to get to the target weight. The RigWheels PT-Zero isolator sections ship fully or partially assembled (depending on the option selected) and the other wall brackets and mounting accessories can be added on easily. In some scenarios, it’s necessary or convenient to place the PTZ camera on top of a surface or stand. With the newly added isolation components, we now also get exceptional results with the “camera-on-top” position and can offer this configuration for more installation options.

PLN 3,278.63*

net: PLN 2,665.55

Free shipping

RigWheels Cloud Mount Slingshot 20 Vibration Isolator

RigWheels Slingshot 20 SKU: SS-20 The RigWheels Slingshot produces great results but the speed and ease of use of the standard Cloud Mount is essential to have in your arsenal. In many locations you are not able to mount a system which hangs to the outside footprint of your vehicle. The hood/roof/trunk placements of the Cloud Mount are ideal for these scenarios. Like all RigWheels systems the components of the Cloud Mount and Slingshot can be used in many other ways further increasing their net value. When you’re not using the system as a vibration isolator you can use the components as hard mounts etc… If you really want to be efficient with the gear you travel with RigWheels in an excellent choice. In one small case you can carry components to configure our RailDolly, Cloud Mount, Slingshot, RigMount X, RigMount XL, RigSkate and more. APPROXIMATE PAYLOAD: 0,00 - 9,07 KG

PLN 5,199.83*

net: PLN 4,227.50

Free shipping

RigWheels PTZ-WM Wall Mount Vibration Isolator

RigWheels PTZ Camera Wall Mount Vibration Isolator SKU: PTZ-WM RigWheels PTZ Wall Mount Vibration Isolator is intended to be bolted/screwed directly to wall or vertical surface using standard hardware. The PTZ camera vibration isolator is made in the USA and constructed with high-quality materials, including machined 6061 aluminum mounting plates and high quality elastic dampening elements. It is designed to be easy to install, allowing you to quickly set up and start using your camera without any additional hassle. This design can also be easily adapted to provide vibration isolation for video projectors. With its versatile design, the PTZ camera vibration isolator can accommodate a wide range of cameras, making it a perfect addition to your existing equipment. The elastic isolation components are cut-to-length corresponding to the weight of the camera being attached to the mount to provide the best isolation possible. Whether you’re recording a concert, capturing footage of a religious service, or conducting any other kind of fixed installation video recording with PTZ camera or remote heads, this mount is a must-have for capturing high-quality footage that’s free from distracting vibrations.

PLN 4,920.68*

net: PLN 4,000.55

Details

Free shipping

LIBEC LX-ePed Electric pedestal with Floor Spreader

LIBEC LX-ePed LIBEC LX-ePed is an electric pedestal with Floor Spreader for PTZ cameras As demand for PTZ cameras is dramatically increasing in the field of broadcast and production, the need for support equipment suitable for PTZ cameras continues to soar. This patent pending LX-ePed was specially developed in order to respond to such demands. This world’s first electric pedestal for PTZ cameras can be remotely operated with a wired controller. With the maximum payload of 10kg, the LX-ePed is able to support most PTZ cameras. There are two types to choose from: the simple Floor Spreader type, and the convenient Dolly type. Features Electric Elevation Pedestal with Remote Control Continuous Speed Adjustment Highly Reliable Wire Connection System V-mount Battery Powered (optional) Compatible with Flat-Base Equipment with a 1/4" or a 3/8" Screw Hole Compatible with Video Heads Compact Design High-Angle Shots User Friendly Accessory Port Safety Design Built-in Bubble Level Technical data Payload: 10kgElevation: 400mm Raising/Lowering speed: Approx. 14 to 40 secs. / movement Continuous operating time: 3 minutes LAN cable for controller: 30mPower cable: 3mPower: AC100V～240V Temperature range: -10°C to 40°C below RH90％ Battery-powered: Optional Camera attachment: 1/4" and 3/8" screws Head attachment: 100mm / 75mm bowl Accessory attachment: 1/4" and 3/8" screw holes x 2 Bubble level: Available Weight: 11.2kgHeight: 95.5 to 247cmSection: 2-Stage

PLN 18,147.39*

net: PLN 14,753.98

RigWheels Cloud Mount Slingshot 10 Vibration Isolator

RigWheels Slingshot 10 SKU: SS-10 The Cloud Mount Slingshot builds on the incredible versatility of the Cloud Mount system by adding a configuration tailored for underslinging your camera/gimbal combination. The new elastic suspension components provide excellent vibration isolation performance for more demanding applications while maintaining the simplicity and practicality that RigWheels in known for. Just like the standard Cloud Mount configurations, the Rigwheels Slingshot is fully adjustable and scaleable for use with a small gimbal and camera all the way up to full cinema packages using a monster like the Movi XL. Simply change the length/diameter of the cables and/or elastic tubing to tailor the mount to the size of your camera setup and the terrain you’ll be operating on. Tubing and cables are both available in 3 different diameters. The elastic tubing is fastened to the system using our stainless steel tube connectors. These come with a variety of threading options so they can be placed in many different positions around our mounting plate as well as used with other rigging accessories. The standard positions for the tube mounts are where the Cloud Mount cables clamps are attached to the plate via 1/4-20″ screws. APPROXIMATE PAYLOAD: 0,00 - 4,54 KG

PLN 4,044.92*

net: PLN 3,288.55

RigWheels PTZ-OI PTZ Camera Overhead Vibration Isolator

RigWheels PTZ Camera Overhead Vibration Isolator SKU: PTZ-OI The RigWheels PTZ camera vibration isolator is the perfect solution to improve image quality for fixed installations in theaters, concert venues, houses of worship, classrooms, factories with machine vibration and other similar locations. This innovative mount is designed to reduce unwanted vibrations that can negatively impact your camera’s performance, allowing you to capture clear and stable images. RigWheels PTZ camera vibration isolator is capable of reducing vibrations from various sources, including loudspeakers, machinery, foot traffic and other problematic sources. This results in exceptionally improved image stability, ensuring that your footage remains clear, even in challenging environments. RigWheels PTZ Camera Overhead Vibration Isolator PTZ-OI opinion is intended to be bolted/screwed directly to ceiling or overhead surface using standard hardware.

PLN 3,552.30*

net: PLN 2,888.05

Free shipping

RigWheels PTZ-WM-PC Wall Mount Vibration Isolator with Pipe Clamps

RigWheels PTZ Wall Mount Vibration Isolator with Pipe Clamps SKU: PTZ-WM-PC RigWheels PTZ Wall Mount Vibration Isolator with Pipe Clamps is intended to be attached to vertical or angled pipe/tube between 1-1/8″ and 2″ in diameter. These clamps can also clamp onto rectangular tubing (1.5 x 2″ rectangular tubing for example). Both overhead and wall mounted positions can also be used with our high power RigMount Magnets for applications such as mounting to a overhead I-Beam or warehouse speed-racks. ATTENTION! pictured tube not included

PLN 5,336.66*

net: PLN 4,338.75

Free shipping

RigWheels Cloud Mount Vibration Isolation Unit

RigWheels Vibration Isolation Unit SKU: CM-VI The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available. In the box 2 x RigPlate8 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)

PLN 2,731.28*

net: PLN 2,220.55

RigWheels PT-Zero Vibration Isolator Hanging

RigWheels PT-Zero Vibration Isolator Hanging SKU: PT-Z-H The PT-Zero greatly improves on the performance of our original PTZ isolators by adding new isolation / damping components which provide 3X more isolation. The PT-Zero uses more than 30 new isolation components to deliver amazing resultsMore options tailored for PTZ cameras to get your camera in the ideal spotPre-assembled components make installation and optimization more intuitive for users and systems integratorsThe optimal weight range of 8-12 lb is easy to achieve with additional weights available for smaller camerasPrecision machined parts made in the USA provide unmatched build quality for PTZ camera installation The PT-Zero Hanging configuration is the option that provides the best possible isolation for your PTZ Camera. The isolator is configured for a target weight range of 8-12 pounds. Lighter cameras can be used but for best performance, our weights should be added to fall into the target weight range. The isolator ships assembled and other accessories like the wall mounting bracket can be added based on you’re installation requirements.

PLN 3,776.72*

net: PLN 3,070.50

RigWheels PT-Zero Vibration Isolator Upright

RigWheels PT-Zero Upright The PT-Zero looks similar to the previous PTZ isolators however, there is a lot more isolation happening. We’ve added more than 30 new isolation components which dramatically increases the degree of isolation possible. We’ve also added more mounting and positioning options. We’ve made it much more easy to install the PT-Zero than the previous isolators. The PT-Zero uses a target weight range of 3,62-5,44 kg. Certainly, there are lots of quality PTZ cameras that are lighter than this so we have created weights that can be added to get to the target weight. The RigWheels PT-Zero isolator sections ship fully or partially assembled (depending on the option selected) and the other wall brackets and mounting accessories can be added on easily. In some scenarios, it’s necessary or convenient to place the PTZ camera on top of a surface or stand. With the newly added isolation components, we now also get exceptional results with the “camera-on-top” position and can offer this configuration for more installation options.

PLN 3,278.63*

net: PLN 2,665.55

Free shipping

RigWheels Cloud Mount Slingshot 20 Vibration Isolator

RigWheels Slingshot 20 SKU: SS-20 The RigWheels Slingshot produces great results but the speed and ease of use of the standard Cloud Mount is essential to have in your arsenal. In many locations you are not able to mount a system which hangs to the outside footprint of your vehicle. The hood/roof/trunk placements of the Cloud Mount are ideal for these scenarios. Like all RigWheels systems the components of the Cloud Mount and Slingshot can be used in many other ways further increasing their net value. When you’re not using the system as a vibration isolator you can use the components as hard mounts etc… If you really want to be efficient with the gear you travel with RigWheels in an excellent choice. In one small case you can carry components to configure our RailDolly, Cloud Mount, Slingshot, RigMount X, RigMount XL, RigSkate and more. APPROXIMATE PAYLOAD: 0,00 - 9,07 KG

PLN 5,199.83*

net: PLN 4,227.50

Free shipping

RigWheels PTZ-WM Wall Mount Vibration Isolator

RigWheels PTZ Camera Wall Mount Vibration Isolator SKU: PTZ-WM RigWheels PTZ Wall Mount Vibration Isolator is intended to be bolted/screwed directly to wall or vertical surface using standard hardware. The PTZ camera vibration isolator is made in the USA and constructed with high-quality materials, including machined 6061 aluminum mounting plates and high quality elastic dampening elements. It is designed to be easy to install, allowing you to quickly set up and start using your camera without any additional hassle. This design can also be easily adapted to provide vibration isolation for video projectors. With its versatile design, the PTZ camera vibration isolator can accommodate a wide range of cameras, making it a perfect addition to your existing equipment. The elastic isolation components are cut-to-length corresponding to the weight of the camera being attached to the mount to provide the best isolation possible. Whether you’re recording a concert, capturing footage of a religious service, or conducting any other kind of fixed installation video recording with PTZ camera or remote heads, this mount is a must-have for capturing high-quality footage that’s free from distracting vibrations.

PLN 4,920.68*

net: PLN 4,000.55

Details

Free shipping

LIBEC LX-ePed Electric pedestal with Floor Spreader

LIBEC LX-ePed LIBEC LX-ePed is an electric pedestal with Floor Spreader for PTZ cameras As demand for PTZ cameras is dramatically increasing in the field of broadcast and production, the need for support equipment suitable for PTZ cameras continues to soar. This patent pending LX-ePed was specially developed in order to respond to such demands. This world’s first electric pedestal for PTZ cameras can be remotely operated with a wired controller. With the maximum payload of 10kg, the LX-ePed is able to support most PTZ cameras. There are two types to choose from: the simple Floor Spreader type, and the convenient Dolly type. Features Electric Elevation Pedestal with Remote Control Continuous Speed Adjustment Highly Reliable Wire Connection System V-mount Battery Powered (optional) Compatible with Flat-Base Equipment with a 1/4" or a 3/8" Screw Hole Compatible with Video Heads Compact Design High-Angle Shots User Friendly Accessory Port Safety Design Built-in Bubble Level Technical data Payload: 10kgElevation: 400mm Raising/Lowering speed: Approx. 14 to 40 secs. / movement Continuous operating time: 3 minutes LAN cable for controller: 30mPower cable: 3mPower: AC100V～240V Temperature range: -10°C to 40°C below RH90％ Battery-powered: Optional Camera attachment: 1/4" and 3/8" screws Head attachment: 100mm / 75mm bowl Accessory attachment: 1/4" and 3/8" screw holes x 2 Bubble level: Available Weight: 11.2kgHeight: 95.5 to 247cmSection: 2-Stage

PLN 18,147.39*

net: PLN 14,753.98

RigWheels Cloud Mount Slingshot 10 Vibration Isolator

RigWheels Slingshot 10 SKU: SS-10 The Cloud Mount Slingshot builds on the incredible versatility of the Cloud Mount system by adding a configuration tailored for underslinging your camera/gimbal combination. The new elastic suspension components provide excellent vibration isolation performance for more demanding applications while maintaining the simplicity and practicality that RigWheels in known for. Just like the standard Cloud Mount configurations, the Rigwheels Slingshot is fully adjustable and scaleable for use with a small gimbal and camera all the way up to full cinema packages using a monster like the Movi XL. Simply change the length/diameter of the cables and/or elastic tubing to tailor the mount to the size of your camera setup and the terrain you’ll be operating on. Tubing and cables are both available in 3 different diameters. The elastic tubing is fastened to the system using our stainless steel tube connectors. These come with a variety of threading options so they can be placed in many different positions around our mounting plate as well as used with other rigging accessories. The standard positions for the tube mounts are where the Cloud Mount cables clamps are attached to the plate via 1/4-20″ screws. APPROXIMATE PAYLOAD: 0,00 - 4,54 KG

PLN 4,044.92*

net: PLN 3,288.55

RigWheels PTZ-OI PTZ Camera Overhead Vibration Isolator

RigWheels PTZ Camera Overhead Vibration Isolator SKU: PTZ-OI The RigWheels PTZ camera vibration isolator is the perfect solution to improve image quality for fixed installations in theaters, concert venues, houses of worship, classrooms, factories with machine vibration and other similar locations. This innovative mount is designed to reduce unwanted vibrations that can negatively impact your camera’s performance, allowing you to capture clear and stable images. RigWheels PTZ camera vibration isolator is capable of reducing vibrations from various sources, including loudspeakers, machinery, foot traffic and other problematic sources. This results in exceptionally improved image stability, ensuring that your footage remains clear, even in challenging environments. RigWheels PTZ Camera Overhead Vibration Isolator PTZ-OI opinion is intended to be bolted/screwed directly to ceiling or overhead surface using standard hardware.

PLN 3,552.30*

net: PLN 2,888.05

Free shipping

RigWheels PTZ-WM-PC Wall Mount Vibration Isolator with Pipe Clamps

RigWheels PTZ Wall Mount Vibration Isolator with Pipe Clamps SKU: PTZ-WM-PC RigWheels PTZ Wall Mount Vibration Isolator with Pipe Clamps is intended to be attached to vertical or angled pipe/tube between 1-1/8″ and 2″ in diameter. These clamps can also clamp onto rectangular tubing (1.5 x 2″ rectangular tubing for example). Both overhead and wall mounted positions can also be used with our high power RigMount Magnets for applications such as mounting to a overhead I-Beam or warehouse speed-racks. ATTENTION! pictured tube not included

PLN 5,336.66*

net: PLN 4,338.75

Free shipping

RigWheels Cloud Mount Vibration Isolation Unit

RigWheels Vibration Isolation Unit SKU: CM-VI The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available. In the box 2 x RigPlate8 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)

PLN 2,731.28*

net: PLN 2,220.55

RigWheels PT-Zero Vibration Isolator Hanging

RigWheels PT-Zero Vibration Isolator Hanging SKU: PT-Z-H The PT-Zero greatly improves on the performance of our original PTZ isolators by adding new isolation / damping components which provide 3X more isolation. The PT-Zero uses more than 30 new isolation components to deliver amazing resultsMore options tailored for PTZ cameras to get your camera in the ideal spotPre-assembled components make installation and optimization more intuitive for users and systems integratorsThe optimal weight range of 8-12 lb is easy to achieve with additional weights available for smaller camerasPrecision machined parts made in the USA provide unmatched build quality for PTZ camera installation The PT-Zero Hanging configuration is the option that provides the best possible isolation for your PTZ Camera. The isolator is configured for a target weight range of 8-12 pounds. Lighter cameras can be used but for best performance, our weights should be added to fall into the target weight range. The isolator ships assembled and other accessories like the wall mounting bracket can be added based on you’re installation requirements.

PLN 3,776.72*

net: PLN 3,070.50

RigWheels PT-Zero Vibration Isolator Upright

RigWheels PT-Zero Upright The PT-Zero looks similar to the previous PTZ isolators however, there is a lot more isolation happening. We’ve added more than 30 new isolation components which dramatically increases the degree of isolation possible. We’ve also added more mounting and positioning options. We’ve made it much more easy to install the PT-Zero than the previous isolators. The PT-Zero uses a target weight range of 3,62-5,44 kg. Certainly, there are lots of quality PTZ cameras that are lighter than this so we have created weights that can be added to get to the target weight. The RigWheels PT-Zero isolator sections ship fully or partially assembled (depending on the option selected) and the other wall brackets and mounting accessories can be added on easily. In some scenarios, it’s necessary or convenient to place the PTZ camera on top of a surface or stand. With the newly added isolation components, we now also get exceptional results with the “camera-on-top” position and can offer this configuration for more installation options.

PLN 3,278.63*

net: PLN 2,665.55

Free shipping

RigWheels Cloud Mount Slingshot 20 Vibration Isolator

RigWheels Slingshot 20 SKU: SS-20 The RigWheels Slingshot produces great results but the speed and ease of use of the standard Cloud Mount is essential to have in your arsenal. In many locations you are not able to mount a system which hangs to the outside footprint of your vehicle. The hood/roof/trunk placements of the Cloud Mount are ideal for these scenarios. Like all RigWheels systems the components of the Cloud Mount and Slingshot can be used in many other ways further increasing their net value. When you’re not using the system as a vibration isolator you can use the components as hard mounts etc… If you really want to be efficient with the gear you travel with RigWheels in an excellent choice. In one small case you can carry components to configure our RailDolly, Cloud Mount, Slingshot, RigMount X, RigMount XL, RigSkate and more. APPROXIMATE PAYLOAD: 0,00 - 9,07 KG

PLN 5,199.83*

net: PLN 4,227.50

Free shipping

RigWheels PTZ-WM Wall Mount Vibration Isolator

RigWheels PTZ Camera Wall Mount Vibration Isolator SKU: PTZ-WM RigWheels PTZ Wall Mount Vibration Isolator is intended to be bolted/screwed directly to wall or vertical surface using standard hardware. The PTZ camera vibration isolator is made in the USA and constructed with high-quality materials, including machined 6061 aluminum mounting plates and high quality elastic dampening elements. It is designed to be easy to install, allowing you to quickly set up and start using your camera without any additional hassle. This design can also be easily adapted to provide vibration isolation for video projectors. With its versatile design, the PTZ camera vibration isolator can accommodate a wide range of cameras, making it a perfect addition to your existing equipment. The elastic isolation components are cut-to-length corresponding to the weight of the camera being attached to the mount to provide the best isolation possible. Whether you’re recording a concert, capturing footage of a religious service, or conducting any other kind of fixed installation video recording with PTZ camera or remote heads, this mount is a must-have for capturing high-quality footage that’s free from distracting vibrations.

PLN 4,920.68*

net: PLN 4,000.55

Details

Free shipping

LIBEC LX-ePed Electric pedestal with Floor Spreader

LIBEC LX-ePed LIBEC LX-ePed is an electric pedestal with Floor Spreader for PTZ cameras As demand for PTZ cameras is dramatically increasing in the field of broadcast and production, the need for support equipment suitable for PTZ cameras continues to soar. This patent pending LX-ePed was specially developed in order to respond to such demands. This world’s first electric pedestal for PTZ cameras can be remotely operated with a wired controller. With the maximum payload of 10kg, the LX-ePed is able to support most PTZ cameras. There are two types to choose from: the simple Floor Spreader type, and the convenient Dolly type. Features Electric Elevation Pedestal with Remote Control Continuous Speed Adjustment Highly Reliable Wire Connection System V-mount Battery Powered (optional) Compatible with Flat-Base Equipment with a 1/4" or a 3/8" Screw Hole Compatible with Video Heads Compact Design High-Angle Shots User Friendly Accessory Port Safety Design Built-in Bubble Level Technical data Payload: 10kgElevation: 400mm Raising/Lowering speed: Approx. 14 to 40 secs. / movement Continuous operating time: 3 minutes LAN cable for controller: 30mPower cable: 3mPower: AC100V～240V Temperature range: -10°C to 40°C below RH90％ Battery-powered: Optional Camera attachment: 1/4" and 3/8" screws Head attachment: 100mm / 75mm bowl Accessory attachment: 1/4" and 3/8" screw holes x 2 Bubble level: Available Weight: 11.2kgHeight: 95.5 to 247cmSection: 2-Stage

PLN 18,147.39*

net: PLN 14,753.98

RigWheels Cloud Mount Slingshot 10 Vibration Isolator

RigWheels Slingshot 10 SKU: SS-10 The Cloud Mount Slingshot builds on the incredible versatility of the Cloud Mount system by adding a configuration tailored for underslinging your camera/gimbal combination. The new elastic suspension components provide excellent vibration isolation performance for more demanding applications while maintaining the simplicity and practicality that RigWheels in known for. Just like the standard Cloud Mount configurations, the Rigwheels Slingshot is fully adjustable and scaleable for use with a small gimbal and camera all the way up to full cinema packages using a monster like the Movi XL. Simply change the length/diameter of the cables and/or elastic tubing to tailor the mount to the size of your camera setup and the terrain you’ll be operating on. Tubing and cables are both available in 3 different diameters. The elastic tubing is fastened to the system using our stainless steel tube connectors. These come with a variety of threading options so they can be placed in many different positions around our mounting plate as well as used with other rigging accessories. The standard positions for the tube mounts are where the Cloud Mount cables clamps are attached to the plate via 1/4-20″ screws. APPROXIMATE PAYLOAD: 0,00 - 4,54 KG

PLN 4,044.92*

net: PLN 3,288.55

RigWheels PTZ-OI PTZ Camera Overhead Vibration Isolator

RigWheels PTZ Camera Overhead Vibration Isolator SKU: PTZ-OI The RigWheels PTZ camera vibration isolator is the perfect solution to improve image quality for fixed installations in theaters, concert venues, houses of worship, classrooms, factories with machine vibration and other similar locations. This innovative mount is designed to reduce unwanted vibrations that can negatively impact your camera’s performance, allowing you to capture clear and stable images. RigWheels PTZ camera vibration isolator is capable of reducing vibrations from various sources, including loudspeakers, machinery, foot traffic and other problematic sources. This results in exceptionally improved image stability, ensuring that your footage remains clear, even in challenging environments. RigWheels PTZ Camera Overhead Vibration Isolator PTZ-OI opinion is intended to be bolted/screwed directly to ceiling or overhead surface using standard hardware.

PLN 3,552.30*

net: PLN 2,888.05

Free shipping

RigWheels PTZ-WM-PC Wall Mount Vibration Isolator with Pipe Clamps

RigWheels PTZ Wall Mount Vibration Isolator with Pipe Clamps SKU: PTZ-WM-PC RigWheels PTZ Wall Mount Vibration Isolator with Pipe Clamps is intended to be attached to vertical or angled pipe/tube between 1-1/8″ and 2″ in diameter. These clamps can also clamp onto rectangular tubing (1.5 x 2″ rectangular tubing for example). Both overhead and wall mounted positions can also be used with our high power RigMount Magnets for applications such as mounting to a overhead I-Beam or warehouse speed-racks. ATTENTION! pictured tube not included

PLN 5,336.66*

net: PLN 4,338.75

RigWheels PTZ-OI-PC Overhead Vibration Isolator with Pipe Clamps

RigWheels PTZ Camera Overhead Vibration Isolator with Pipe Clamps

The professional source for Filmmakers in Warsaw

We provide best equipment and advice in the field of professional video- and audio- technology