RigWheels RailDolly Carriage only

RigWheels Longboard Wheel SKU: LW01 These RigWheels Longboard Wheel are the perfect custom formulation for film and video applications. Not too hard, not too soft. They include ABEC 7 bearings and the hard-to-find spacers that go inside the wheel. Can be mounted with 5/16″ or M8 size bolts.

RigWheels RigAxle SKU: RA01 RigAxles are designed to be used in conjunction with RigPlate. They allow for several different additional configurations that provide you with even more options for getting smooth camera movement with the RigWheels system.RigAxles with custom inline wheels attached to the ends turn the RigPlate into a more robust tabletop dolly with a larger footprint. This is an ideal solution for larger camera setups. You can also pivot the RigAxles to get curved dolly moves.A single RigAxle can be used in conjunction with RigPlate and RigWheels to add a bottom bar to make a captive rail pipe slider. RigAxles and RigPlate are used together to in RailDolly configuration.

RigWheels Rail Brackets RigWheels Rail Brackets are universal in BOTH width and pipe size so they can be used with virtually any suspended rail type slider/dolly on the market. You can use pipe with an outside diameter between 1″ (24mm) and 2″ (50mm). You can also use square/rectangular rails up to 1-3/4″ The useable distance between the rails (center to center) is adjustable from 5″ to 21.5″ with the 3 different lengths of cross-bars we stock. You can also use full or half-strut widely available at hardware stores to make custom lengths. Each set includes 2 pieces (both ends of the track)  13″ Cross Bars are the correct size for MicroWheels Carriage 1, MicroWheels Carriage 2 & MicroWheels Carriage 318″ Cross Bars are the correct size for the RailDolly Configurations23.5″ Cross Bars are here for future uses In the box 2 x Cross Bar4 x Variable Size Pipe Clamp2 x Baby Junior Adapter8 x 3 Prong Knob – 5/16-18″2 x 3 Prong Knob – 1/4-20″ 2 x 3/8″ Bolt – 3/4″ Long2 x 3/8″ Split Washer2 x 3/8″ Washer8 x 5/16″ Washer

RigWheels Inline Wheel SKU: IW01 These Rigwheels inline skate wheels are the perfect custom formulation for film and video applications. Not too hard, not too soft. They include ABEC 7 bearings and the hard-to-find spacers that go inside the wheel. Can be mounted with 5/16″ or M8 size bolts.

RigWheels RigPlate SKU:RP01 RigPlate is one of the most versatile pieces of camera mounting hardware you can own. Versatility is king at RigWheels. RigWheels designs everything with versatility in mind and the RigPlate camera cheese plate delivers. The first function is to serve as a camera mounting plate to attach MicroWheels to. One RigPlate and one set of MicroWheels provides you with smooth movement as a table-top / skater dolly that you can use on any smooth hard surface.Using Rigwheels RigPlate as a pipe dolly gives you scalable slider / dolly option that is tailored for the new generation of mid-size and compact cameras. Attaching two RigPlates together creates a captive-rail camera carriage that allows secure camera movement at any angle. Using RigPlate in conjunction with RigAxels adds even more capability to this simple affordable system with a more traditional table-top dolly setup and a robust pipe-dolly option.RigPlate is a great camera support platform and it can be used for much more than camera movement. With the amount and variety of mounting points there are an endless variety of accessories that can be attached. There are (14) 1/4-20 and (4) 3/8-16 threaded holes (industry standard sizes) in addition to four 5/16” and five 3/8” pass through holes. A RigPlate can be turned into a rock-solid suction mount by adding A-Cups, B-Cups or C-Cups. One thing we’re excited about is our new RigMount products. New camera technology allows us to use magnets which would have never been considered a few years ago when using video tape. The hi-power RigMount magnetic mounts provide a new solution for mounting cameras in unique and different ways. A single RigMount is also a great solution for mounting sports/action cameras and smaller still cameras.

RigWheels Passport Camera Dolly SKU: PCD1 The Passport Camera Dolly System is tailor made for traveling professionals and remote on-location production. The all-in-one design and rock solid build quality make the Passport Camera Dolly system ideal for international documentary and network news style production where larger/heavier camera systems (up to 100 pounds) are being used and a stable, reliable platform is needed. The entire kit is flight ready at 50lbs (23kg) an won’t incur expensive excess charges. 6.3′ (1.95m) of track collapse into 19″ sections that pack along with the camera dolly carriage, end-brackets and ball-head adapters into the included custom Pelican 1610 protector case (with wheels & handle). This system includes RailDolly Camera Dolly CarriageUniversal End Brackets75 & 100mm Ball Head Adapters8 x 6.3′ of PortaRail in 19″ sections.Pelican 1610 Protector Case with Custom Foam Individual components 1 x RigPlate22 x RigAxle4 x Inline Wheel4 x Longboard Wheel8 x 19″ PortaRail 1pc8 x PortaRail Connector16 x Rubber End Caps1 x Passport Camera Dolly Case2 x Baby Junior Adapter2 x 18″ Cross Bar4 x Variable Size Pipe Clamp1 x 100mm Ball Adapter1 x 75mm Ball Adapter8 x 3 Prong Knob – 5/16-18″4 x 3 Prong Knob – 1/4-20″4 x Long 5/16″ Wheel Spacer4 x 5/16″ Bolt – 3-1/2″ Long4 x 5/16″ Bolt – 1-1/4″ Long12 x 5/16″ Washer3 x 3/8″ Bolt – 3/4″ Long3 x 3/8″ Washer2 x 3/8″ Split Washer4 x Wing Nut – 5/16″