Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Showroom in Warsaw +48 22 299 06 61
Go to homepage
Wishlist
Shopping cart PLN 0.00*

Wooden Camera Arri Alexa LF 24V Sharkfin Battery Bracket (V-Mount)

Free shipping
ARRI Alexa LF Sharkfin Battery Bracket
Alexa LF Sharkfin Battery Bracket
wooden camera 262900
Arri Alexa LF 24V Sharkfin Battery Bracket
Alexa LF 24V Sharkfin Battery Bracket
ARRI Alexa Sharkfin Battery Bracket
Alexa Sharkfin Battery Bracket
Alexa Sharkfin Battery Bracket v-Mount
ARRI Alexa LF Sharkfin Battery Bracket
Alexa LF Sharkfin Battery Bracket
wooden camera 262900
Arri Alexa LF 24V Sharkfin Battery Bracket
Alexa LF 24V Sharkfin Battery Bracket
ARRI Alexa Sharkfin Battery Bracket
Alexa Sharkfin Battery Bracket
Alexa Sharkfin Battery Bracket v-Mount

PLN 7,657.43*

net: PLN 6,225.55

Prices incl. VAT plus shipping costs

Free shipping

No longer available

Product number: SW22089

Wooden Camera Arri Alexa LF 24V Sharkfin Battery Bracket

SKU: 262900

ARRI Alexa LF 24V Sharkfin Battery Bracket (V-Mount) allows for two standard voltage V-Mount batteries to power the Alexa LF, which requires 24V. Key features include hot swapping capability between batteries and the DC input, 4x D-Tap connectors that remain powered with at least one battery installed, percentage information transmitted to the camera when smart batteries are used, knobs for tool-less installation with a hidden allen wrench for additional tightening, and a protective cover plate for when battery bracket is not in use.

Hot Swapping and Normal Operation

Since the Alexa LF requires high current for normal operation, two batteries capable of 10A sustained draw should be installed at all times. At camera idle, when no lens motors are moving, batteries can be swapped one at a time while the camera and accessories remain powered. It is also possible to hot swap between block battery and onboard batteries.

4x D-Tap Accessory Power

2x D-Taps are available on each power plate in various positions. All D-Taps remain powered even when a single battery is installed. Note that D-Taps will not function when only powering the camera from a block battery while no onboard batteries are installed.

Percentage Display in Camera

The Sharkfin module will read SMBUS and reverse SMBUS batteries, combine the data, and provide a summarized information stream to the camera. This data is displayed in the UI on the side of the camera body, LCD, EVF, etc.

Tool-less Installation and Protective Cover

The system has four M3 thumbscrews and two locating points which attach directly to the back of the camera. The allen wrench can be used to complete the installation and stored neatly on the plate for future use. The included cover plate is great for protecting the pogo pins during transit. Please note that voltage will be present on the pogo pins when a battery is installed so do not attach a battery if the bracket is not installed on the camera.

  • Weight: 907 g
  • Dimensions: 140 mm x 146 mm x 95.3 mm

TOP-Handles - Camera cages - Camera plates - Camera brackets  -  Matte box - Battery plates - Power cables

Products from american producer Wooden Camera that offers useful solution for your video-audio equipment. The range of product concenrs

 

Related links of the manufacturer

Accessory Items

V-Type HotSwap Adapter Plate
Core SWX GP-TS V-Mount HotSwap Adapter Plate
Core SWX GP-TS V-Type HotSwap Adapter Plate The Core SWX GP-TS Hotswap adapter mounts directly to the existing v-type plate on the camera and allows for continuous battery operation. Because the batteries aren't 'stacked' on one another, you can easily remove the depleted battery while the leaving the other battery connected so that their is no down time. It can provide up to 260wh at only 6lbs. Not recommended with XP-L190Si battery model. Compatible with all V-Mount Brick Batteries. V-Type HotSwap Adapter Plate Technical data Input DC 11-17vOutput for Camera DC 11-17v, Unregulated ParalleledOutput for P-Tap DC 11-17v, UnregulatedSize12.07 cm x 13.97 cm x 8.89 cmWeight 0.73 kg

PLN 1,149.44*
net: PLN 934.50
anton bauer qr hotswap-ar
Anton Bauer QR HOTSWAP-AR Snap-On Hot Swap
Anton Bauer QR HOTSWAP-AR Snap-On Hot Swap Gold Mount for ARRI ALEXA Camera allows for use of two, DIONIC HC or DIONIC HCX for seamless hot swapping and longer run-times. Exclusive communication available only with the QR-HOTSWAP-AR shows combined batteries' remaining run-time in the camera viewfinder. Technical data Mounts to ARRI AlexaMount Gold MountType Mounting PlateWarranty MAXX I - One year conditional warranty

PLN 2,298.87*
net: PLN 1,869.00
Free shipping
Core SWX GP-TS-SFF
Core SWX GP-TS-SFF Short Form Factor Hotswap Shark-Fin Battery Mount (V-Mount, 4 x D-Taps)
Core SWX GP-TS-SFF The Core SWX GP-TS-SFF is a short form factor Hotswap Shark-fin adapter that mounts directly to the existing v-type plate on the camera. It allows for continuous battery operation, and for additional accessories, it has 4 powertaps. Since the batteries aren’t ‘stacked’ on one another, you can easily remove the depleted battery while leaving the other battery connected so that there is no down time. Specification: Input: DC 11-17vOutput for Camera: DC 11-17v, Unregulated ParalleledOutput for 4x P-Tap: DC 11-17v, Unregulated, 7.2A maxSize: 11,68 cm x 8,89 cm x 11,94 cmWeight: 0,54 kg

PLN 1,341.01*
net: PLN 1,090.25
Core SWX HLX-TS-SFF
Core SWX HLX-TS-SFF Helix HotSwap/SharkFin V-Mount Battery Plate
Core SWX HLX-TS-SFF SKU: HLX-TS-SFF The Core SWX HLX-TS-SFF is a v-mount to v-mount sharkfin plate that accepts HELIX battery packs and standard 14v packs. When two HELIX battery packs are on-board and connected to a HLX mount plate, the adapter can output both 11-17vdc and 22-34vdc. A separate pin set for high voltage allows for safe power transmission. Features Hotswap/Sharkfin V-Mount PlateAccepts both Helix packs to connect to HLX-BAB-V mount plate to output 33.6vAlso accepts 14v V-mount packs for parallel standard voltage operation Technical data Mount input: DC 11-34v Output for Camera/P-Taps: DC 11-34v, Unregulated

PLN 1,669.42*
net: PLN 1,357.25
Free shipping
wc v-mount alexa mini
Wooden Camera WC V-Mount Plate for ARRI Alexa Mini
Wooden Camera WC V-Mount (Alexa Mini) SKU: 207500 Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and ARRI Alexa Mini LEMO connector. This plate is also compatible with the ARRI Amira. 16" cable exits the right side of the plate allowing easy insertion into the camera2 x D-Tap ports for accessory power To mount the Wooden Camera WC V-Mount onto the Alexa Mini, we recommend the below combination Quick Cage (Alexa Mini + LW) - cage that surrounds the camera and provides standard mounting pointsBattery Slide - an adjustable battery mounting plate that attaches a V-Mount or Gold Mount plate to Quick Cage (Alexa Mini) WC V-Mount (Alexa Mini) Specifications Weight 227 gDimensions 143.2 mm x 92 mm x 21.9 mm

PLN 1,642.05*
net: PLN 1,335.00
Details
Pay with:
We ship with:
Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Showroom in Warsaw +48 22 299 06 61