Wooden Camera Battery Slide Pro V-Mount (Sony FX6)

Tip

PLN 2,408.34*

net: PLN 1,958.00

Prices incl. VAT plus shipping costs

Available in 3 days, delivery time 3-5 Tage

Our availability in the Christmas in-between period: we will be closed from 23.12.2024. All orders placed during this period will be accepted, but shipped after 06.01.2025. We wish you a Merry Christmas and a Happy New Year.

Product number: SW28435

Manufacturer: Wooden Camera

EAN: 606184860036

Manufacturer product number: 283000

Delivery time: 3-5 Tage

Wooden Camera Battery Slide Pro V-Mount (Sony FX6)

SKU: 283000

Battery Slide Pro V-Mount (Sony FX6) utilizes a WC Pro V-Mount plate which converts battery voltage to 19.5V for the camera, FX6 barrel connector, and a custom Battery Slide which attaches directly to the back of the camera without rods. This system retains access to the battery compartment and allows the Sony BPU series battery to be installed, giving the user the ability to hot swap V-Mount batteries. To adjust battery plate position, loosen the thumbscrew and slide. Fits rear profile of the Sony FX6 for compact packing in camera case.

Features 3x D-Tap ports at battery voltage for accessory power and digital fuse which cuts off accessory outputs while leaving the camera powered

Details of the manufacturer

Wooden Camera
8 Mason Irvine
California 92618, United States

+1 855.966.3226

https://woodencamera.com/pages/contact-us

Details of the person responsible for putting the product on the European market

New Media AV Bauer und Trummer GmbH
Johannes Bauer
Pirnaer Straße 20
90411 Nürnberg, Germany

+49 911 5399-60

team@nmav.de

Similar products

Wooden Camera Battery Slide Pro (Canon C300mkIII, C400, C500mkII) 282300

Battary Mount: V-Mount

Battery Slide Pro (Canon C300mkIII, C400, C500mkII) Battery Slide Pro (Canon C300mkIII, C400, C500mkII) utilizes a WC Pro Gold Mount or V-Mount plate and provides battery voltage to the camera through a 4pin XLR connector. Features a custom Battery Slide which attaches directly to the back of the camera without rods. This system retains access to the battery compartment and allows an internal BPU battery to be installed, giving the user the ability to hot swap batteries. To adjust battery plate position, loosen the thumbscrew and slide. DC Input on camera-right side can be used for hot-swapping between block battery and on-board battery.Features 3x D-Tap ports at battery voltage for accessory power and digital fuse which cuts off accessory outputs while leaving the camera powered.SpecificationsWeight: 349.27 gDimensions: 152.4 x 101.6 x 44.4 mm

PLN 2,244.14*

net: PLN 1,824.50

Wooden Camera Battery Slide Pro (Canon EOS C70/C80) 288500

Battary Mount: V-Mount

Wooden Camera Battery Slide Pro (Canon EOS C70/C80)Custom WC Gold Mount or V-Mount Pro battery plate for providing external power to the Canon EOS C70 and Canon EOS C80 cameras. Features 3x D-Tap ports for accessory power, including a digital fuse which cuts off accessory outputs while leaving the camera powered.Battery Slide Pro (Canon EOS C70/ C80) can be attached to any standard Canon Accessory Mount by aligning the interlocking ridges and turning the attachment thumbwheel to tighten a 1/4”-20 screw; rods are not required. This system retains access to the original C70 battery compartment, enabling operators to hot-swap power between both BPU and brick batteries. To adjust the battery plate’s vertical position, loosen the pivoting clamp and slide the plate up or down.Compatible withCanon EOS C70Canon EOS C80Wooden Camera Top Plate (Canon C70)Wooden Camera Mini Top Handle (Canon C70)Top Plate for Canon EOS C80ARCA Riser Plate for Canon EOS C80and more

PLN 2,227.71*

net: PLN 1,811.15

Tip

Wooden Camera Battery Slide Pro V-Mount (RED KOMODO)

Wooden Camera Battery Slide Pro V-Mount (RED KOMODO) SKU: 280300 Battery Slide Pro V-Mount ttaches to the camera-left, BP-9 battery slot and powers the camera using a right angle LEMO compatible connector. Thumbscrew can be loosened to tilt and slide the plate as needed. Three D-Taps on the plate provide battery voltage for accessories and power is monitored for over-current. If more than 5.8A are used by accessories, a digital fuse will trip and the red LED will illuminate but the camera will remain powered. Reset button can be pressed once to restart accessory power. DC Input on camera-right side can be used for hot-swapping between block battery and on-board battery. While the AC adapter that comes with the KOMODO can be used, please note that it may not be powerful enough to sustain the camera and accessory draw. If hot-swapping between Gold Mount battery and BP-955 battery is desired, please consider Battery Slide Extension for Canon BP-955 Hot Swap (RED KOMODO) which moves the battery plate further back from the camera body. Weight: 264 gDimensions: 127 mm x 114.3 mm x 44.45 mm

PLN 1,751.52*

net: PLN 1,424.00

Free shipping

Wooden Camera Battery Slide Pro V-Mount (Sony FX9)

Wooden Camera Battery Slide Pro V-Mount (Sony FX9) SKU: 275900 Battery Slide Pro V-Mount (Sony FX9) utilizes a WC Pro V-Mount plate which converts battery voltage to 19.5V for the camera, FX9 barrel connector, and a custom Battery Slide which attaches directly to the back of the Sony FX9 camera without rods. This system retains access to the battery compartment and allows an internal BPU battery to be installed, giving the user the ability to hot swap V-Mount batteries. To adjust battery plate position, loosen the thumbscrew and slide. Perfectly fits rear profile of the Sony FX9 for compact packing in camera case.Features 3x D-Tap ports at battery voltage for accessory power and digital fuse which cuts off accessory outputs while leaving the camera poweredWeight: 349.27 g Dimensions: 76.2 mm x 44.45 mm x 177.8 mm

PLN 2,298.87*

net: PLN 1,869.00

Wooden Camera Battery Slide Pro V-Mount (Sony FX6)

Wooden Camera Battery Slide Pro V-Mount (Sony FX6)

The professional source for Filmmakers in Warsaw

We provide best equipment and advice in the field of professional video- and audio- technology