Wooden Camera C-Box (Converter, D-Tap)

PLN 3,070.63*

net: PLN 2,496.45

Prices incl. VAT plus shipping costs

No longer available

Product number: SW13821

Wooden Camera C-Box (Converter, D-Tap)

SKU: 176200

C-Box (Converter, D-Tap) accepts HDMI and 3G HD-SDI input, selectable via switch on operator's side, and outputs simultaneously three channels of HD-SDI and two of HDMI. The device draws power from the D-Tap of a battery or battery plate using the included cable. Each video output is independently reclocked and carries the same signal strength as the original. LED indicators are located on the operator's side to show status of power and signal.

This version attaches between any V-Mount or QRC-style Gold Mount and wherever the plate was attached previously. For example, the Wooden Camera C-Box (Converter, D-Tap) can fit between the WC V-Mount (Epic/Scarlet) and the Quick Back v2. Another example would be attaching it between the WC Gold Mount (BMC) and the Battery Slide.

C-Box Overview

Power Input 4 pin mini-XLR, 12-24 VDC .5A
Included 4" D-Tap to 4 pin mini-XLR cable
LED indicator for Signal and Power on operator side
Bolts to standard V-Mount, QRC-style Gold Mount, and RED/Blueshape mounting patterns
Standard V-Mount, QRC-style Gold Mount, and RED/Blueshape plates can be bolted to the box itself
1/4-20 holes on bottom allow for attachment of rod clamps, cheeseplates, and other accessories
Re-clocks standard SD, HD and 3G SDI data rates
Auto bypasses non-standard SDI rates from 20Mbit/s to 3Gbit/s
Passes SDI embedded audio and ancillary data
Operating Temperature 0 to +40 C
Operating Humidity 0 to 90% Non-Condensing

Signal Information

Data Types: SMPTE 259/292/424
Data Rates: 19 Mbit/s through 3.0 Gbit/s
Re-clocking Data Rates: 270 Mbit/s, 1.485 Gbit/s, 2.97 Gbit/s
Input/Output Return Loss: > 15dB @ HD, > 12dB @ 3G
Input Level: 800 mV P-P +/- 20%
Input Impedance: 75 Ohms +/- 1%
Output Level: 800 mV P-P +/- 5%
Output Impedance: 75 Ohms +/- 1%
Output Jitter: < 0.2 UI

Other Notes

A/C Adapter included
2 positions available for mounting QRC-style power plates: high and low
Hole pattern available for mounting common accessory V mount
4 pin mini-XLR power connector same as TV Logic/Alphatron

TOP-Handles - Camera cages - Camera plates - Camera brackets - Matte box - Battery plates - Power cables

Products from american producer Wooden Camera that offers useful solution for your video-audio equipment. The range of product concenrs

Related links of the manufacturer

Further products by Wooden Camera

Accessory Items

Wooden Camera Quick Back v2

Wooden Camera Quick Back v2 SKU: 159400 New design and lower package price of Wooden Camera Quick Back v2 allows mounting of all three styles of battery plates without intermediary adapters. Anton Bauer QRC, Switronix, RED, Blueshape, IDX, and more will mount directly. Attaches to back of any RED Module without tools. Combine with battery plate for compact power solution. Use with Wooden Camera A-Lock to mount the battery plate in alternative configurations. The Quick Back v2 system is the only battery solution that can natively attach to the back of any RED Module, including the +1 Module!* Install M4 screws before attaching heavy batteries Quick Back v2 Includes 4 x m4x12mm socket cap6 x m3x5mm socket screws4 x m3x6mm phillips screws4 x m3x12mm phillips screws4 x m3x14mm phillips screws

PLN 1,286.27*

net: PLN 1,045.75

Details

Wooden Camera C-Box Wireless HDMI Protector

Wooden Camera C-Box Wireless HDMI Protector SKU: 183700 C-Box Wireless HDMI Protector attaches to the C-Box (Converter) line of products and protects your wireless HDMI transmitter connections from being bumped or broken. The Protector attaches via two screws making it very secure and the side cutout allows for the 5v mini USB cable included with the main C-Box unit to be inserted. Works with Paralinx Arrow, IDX Cam-Wave, etc. C-Box Wireless HDMI Protector Overview Attaches via two M3 socket cap screwsCompatible transmitters: Paralinx Arrow, IDX Cam-Wave, Nyrius, CMR Radian, and other similarly sized devicesSide slot for inserting 5v mini USB cableBolts to C-Box (Converter, D-Tap), and C-Box (Converter,Gold Mount) 2 x M3x5mm Socket Cap Screws

PLN 350.30*

net: PLN 284.80

Details

Tip

Wooden Camera Battery Slide

Wooden Camera Battery Slide SKU: 156600 Battery Slide is an adjustable mounting system for WC V-Mount, WC Gold Mount, QRC Gold Mount, and RED/Blueshape style battery plates. Rows of pass through holes allow attachment of Rod Clamps, cheeseplates, and more. Apply firm pressure to tilt the plate in place. Loosen the thumbscrew to slide the plate up and down and also tilt. Wooden Camera Battery Slide great for adjusting counterbalance and for transitioning from studio to handheld mode. Battery Slide Includes 2 x 1/4-20 x 1/4 Socket Cap Screws4 x M3 x 12mm Pan Head Screws4 x M3 x 8mm Flat Head Screws4 x #4x40 x 5/8 Pan Head Screws

PLN 821.03*

net: PLN 667.50

Free shipping

Wooden Camera WC V-Mount (Epic / Scarlet)

Wooden Camera WC V-Mount (Epic/Scarlet) SKU: 167000 Wooden Camera WC V-Mount plate utilizing an IDX V-Mount and RED Epic/Scarlet LEMO connector. This plate is wired correctly to display RED Brick and smart V-mount battery percentage on displays. 8" cable exits the right side of the plate allowing easy insertion into the camera. Design allows minimal cable excess while still being able to reach additional modules when necessary. 2x D-Tap ports for accessory power To mount the WC V-Mount onto the back of the Epic/Scarlet one of these items is required Quick Back v2 - a quick release plate that can attach to the back of the brain or any RED moduleFixed Back - a bolt on battery mount that can only attach to the brain

PLN 1,395.74*

net: PLN 1,134.75

Similar products

Free shipping

Wooden Camera C-Box (Converter, Gold Mount)

Wooden Camera C-Box Converter Gold Mount SKU: 176400 C-Box (Converter, Gold Mount) accepts HDMI and 3G HD-SDI input, selectable via a switch on the operator's side, and simultaneously outputs three channels of HD-SDI and two of HDMI. The device draws power internally from the male Gold Mount plate attached and passes power through to the camera via the female Gold Mount plate on the other side. The male Gold Mount plate has an additional D-Tap output for accessory power. Each HD-SDI output is independently reclocked and carries the same strength as the original signal. LED indicators are located on the operator's side to show status of power and signal. 5V Mini USB port on operator's side for powering wireless transmitters like Paralinx, IDX Cam-Wave, etc. This version of Wooden Camera C-Box attaches between any Anton Bauer QRC size Gold Mount plate and Gold Mount battery. For example, the C-Box (Converter, Gold Mount) can fit between an Anton Bauer Dionic HC battery and the QB Anton Bauer (QRC-EPIC). Overview Power input via Gold Mount battery, 12-24 VDC .5AAttaches between standard Gold Mount battery and camera Gold Mount plateLED indicator for Signal and Power on operator side5V mini USB output for accessory power1/4-20 holes on bottom allow for attachment of rod clamps, cheeseplates, and other accessoriesRe-clocks standard SD, HD and 3G SDI data ratesAuto bypasses non-standard SDI rates from 20Mbit/s to 3Gbit/sPasses SDI embedded audio and ancillary dataOperating Temperature 0 to +40 COperating Humidity 0 to 90% Non-Condensing Signal Information Data Types SMPTE 259/292/424Data Types 19 Mbit/s through 3.0 Gbit/sRe-clocking Data Rates 270 Mbit/s, 1.485 Gbit/s, 2.97 Gbit/sInput/Output Return Loss > 15dB @ HD, > 12dB @ 3GInput Level 800 mV P-P +/- 20%Input Impedance 75 Ohms +/- 1%Output Level 800 mV P-P +/- 5%Output Impedance 75 Ohms +/- 1%Output Jitter< 0.2 UI

PLN 3,557.78*

net: PLN 2,892.50

Details

Wooden Camera C-Box (Converter, V-Mount)

Wooden Camera C-Box Converter V-Mount SKU: 176300 C-Box (Converter, V-Mount) accepts HDMI and 3G HD-SDI input, selectable via a switch on the operator's side, and simultaneously outputs three channels of HD-SDI and two of HDMI. The device draws power internally from the male V-Mount plate attached and passes power through to the camera via the female V-Mount plate on the other side. The male V-Mount plate has an additional D-Tap output for accessory power. Each HD-SDI output is independently reclocked and carries the same strength as the original signal. LED indicators are located on the operator's side to show status of power and signal. 5V Mini USB port on operator's side for powering wireless transmitters like Paralinx, IDX Cam-Wave, etc.Wooden Camera C-Box Converter V-Mount attaches between any V-Mount plate and V-Mount battery. For example, the C-Box (HD-SDI, V-Mount) can fit between the Blueshape BV090 Battery and the WC V-Mount (Epic/Scarlet). Another example would be attaching it between the Blueshape BV090 Battery and the WC V-Mount (BMC). C-Box Converter V-Mount Overview Power input via V-Mount battery, 12-24 VDC .5AAttaches between standard V-Mount battery and camera V-Mount plateLED indicator for Signal and Power on operator side5V mini USB output for accessory power1/4-20 holes on bottom allow for attachment of rod clamps, cheeseplates, and other accessoriesRe-clocks standard SD, HD and 3G SDI data ratesAuto bypasses non-standard SDI rates from 20Mbit/s to 3Gbit/sPasses SDI embedded audio and ancillary dataOperating Temperature 0 to +40 COperating Humidity 0 to 90% Non-Condensing Signal Information Data Types SMPTE 259/292/424Data Types 19 Mbit/s through 3.0 Gbit/sRe-clocking Data Rates 270 Mbit/s, 1.485 Gbit/s, 2.97 Gbit/sInput/Output Return Loss > 15dB @ HD, > 12dB @ 3GInput Level 800 mV P-P +/- 20%Input Impedance 75 Ohms +/- 1%Output Level 800 mV P-P +/- 5%Output Impedance 75 Ohms +/- 1%Output Jitter< 0.2 UI

PLN 3,825.98*

net: PLN 3,110.55

Details

Wooden Camera C-Box (Converter, D-Tap)

Wooden Camera C-Box (Converter, D-Tap)

C-Box Overview

Signal Information

Other Notes

TOP-Handles - Camera cages - Camera plates - Camera brackets - Matte box - Battery plates - Power cables

The professional source for Filmmakers in Warsaw

We provide best equipment and advice in the field of professional video- and audio- technology