Wooden Camera E-Mount to PL Mount Pro Adapter (Sony FS5)

Wooden Camera PL Mount Modification Kit SKU: 274600 The PL Mount Modification Kit (Blackmagic Pocket Cinema Camera 6K / 6K Pro) allows users to convert their BMPCC6K camera to a PL Mount through a short modification process. All necessary tools are included in the kit. The PL Mount is made of stainless steel and aircraft grade aluminum and includes the PL port cap. Shims are provided with the kit for adjusting back focus and the appropriate shims are installed prior to shipping. Further adjustment should not be needed but can be checked using a wide angle lens and a focus chart. The BMPCC6K's own EF Mount screws are used to attach the PL Mount to the camera.The modification process can be reversed. If you choose to go back to EF mount in the future, you can do it by reversing steps in the process, however, switching back and forth will eventually strip the plastic in your camera as the sensor block is made of a composite plastic material (it is strong but still plastic). Includes 1x Shim Set1x Jeweler's ScrewdriverShim set (stackable to achieve necessary thickness)Silver .0127mm (0.0005") Amber .0254mm (0.001")Purple .0381mm (0.0015")Red .0508mm (0.002")Green .0762mm (0.003")Tan .1016mm (0.004")Blue .127mm (0.005") Important Note: While the vast majority of modern, s35mm lenses are compatible, lenses with a rear protrusion longer than 33.5mm, measured from the PL flange, are not compatible and other lenses may not fit due to the shape of the original Blackmagic 6K body design. A list of incompatible lenses will be available but will be a work in process. A diagram will also become available soon which will detail the protrusion requirements for fitting into a modified BMPCC6K.

Chrosziel MA-EPL-HR12 The Chrosziel Meta Mount is a Sony E camera to PL lens “hot mount” adapter with metadata communication. Each mount has the required pin contacts necessary to transmit lens metadata through to the camera and conversely the contacts provide lens control through a 12-pin Hirose out connection to an ENG lens. When the Meta Mount is used with cine lenses with LDS or Cooke/i Data the metadata such as iris setting, focus distance and zoom focal length are transmitted through the adapter and appear in the viewfinder, on the monitor and are recorded in the video file for use in post processing. When the Meta Mount is used with an ENG servo motor-controlled broadcast lens the Focus/Iris/Zoom servo’s can be controlled through the camera and are compatible with the Sony FX9 / FX6 / FX3 hand grips, RCP or camera’s web GUI. This allows for easy and full control of an ENG broadcast lens through a Sony E mount camera. The Meta Mount is shimmable with the included shim set for the E-mount. Key Features Sony E Mount Camera to PL mount LensElectronic contacts for metadata communication and lens controlLens metadata displayed in camera and recorded to fileShimmable E MountFull focus/Iris/Zoom control on servo motor ENG lenses Technical data E Mount camera to PL mount lensContact and electronics for Metadata communication12-pin Hirose out for ENG lens control3/8th lens support socketUSB Type min A-B (for firmware updates only)Power supply 10-16V (Lemo compatible 0B 5-pin)Power consumption max. ca. 350mAh @ 12V In the box 1x Meta Mount E-to-PL adapter (MA-EPL-HR12)1x MN-AB (power supply cable 12 Volt A/B D-Tap – 0B 5-pin Lemo)1x F55-A2-P-CAM1x Shim Set, E-Mount side1x USB Mini Adapter

Wooden Camera E-Mount to PL Mount Pro (FS7) SKU: 194000 E-Mount to PL Adapter Pro (FS7) is a shimmable Sony E-Mount to PL mount adapter that enables mounting of all PL mount lenses onto the Sony PXW-FS7 camera. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Mount includes a support ring that integrates with the Top Plate (FS7), a highly recommended addition to this system. Loosen the support ring thumbscrew to quickly remove the mount and install another adapter. This adapter will also work with any E-Mount camera like the A7, A7r, A7s, A7 II, FS100, FS700, NEX-5, NEX-6, NEX-7, etc, however, the support ring would not be utilized. Support ring capable of integrating with Top Plate (FS7) 2 x 1/4-20x1/2" socket cap screws Shim set (stackable to achieve necessary thickness) Silver.0127mm    (0.0005")Amber.0254mm    (0.001")Purple.0381mm    (0.0015")Red.0508mm     (0.002")Green.0762mm     (0.003")Tan.1016mm     (0.004")Blue.127mm       (0.005") Specifications Weight 408 gDimensions 101.60 mm x 101.60 mm x 76.20 mm

Vocas Sony E-mount to PL adapter including 15mm support SKU: 0900-0023 Sony E-mount adapter including 15mm support. This adapter allows the use of PL type lenses on cameras that use a Sony E-mount lens mount, such as the Sony NEX-FS100. Includes 1 x Vocas Sony E-Mount to PL Lens Mount Adapter 1 x Vocas Separate 15mm support for PL adapter

Wooden Camera ARRI LPL Mount for RED DSMC2 Cameras SKU: 263600 ARRI LPL Mount for RED DSMC2 Cameras allows ARRI LPL Signature Prime Lenses to be used with RED DSMC2 Brains with a full frame, Vista Vision sensor (RED Monstro). ARRI's LPL to PL Adapter is also compatible allowing easy change from standard PL lenses to LPL lenses. An external LDS-2 port is present but not currently utilized. Once external LDS-2 metadata workflows are created, this port can be connected to a metadata recorder.Wooden Camera ARRI LPL Mount for RED DSMC2 Cameras is also compatible with the standard sensor size RED cameras like Helium, Gemini, Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), Raven, and other DSMC2 cameras. Also compatible with original DSMC1 cameras like Dragon, Epic, and Scarlet. Weight: 216g Dimensions: 81.8 mm x 81.8 mm x 46.5 mm

Wooden Camera L-Mount to PL Mount Pro SKU: 271800 L-Mount to PL Mount Pro (Panasonic and Leica) is a shimmable version of our PL lens mount adapter that enables mounting of PL mount lenses onto the Panasonic and Leica L-Mount cameras. Mount includes a foot with 1/4-20 threaded hole for attaching to a tripod eliminating strain on the camera. The foot can also attach directly to the front of the Unified DSLR Cage (Medium) by two included screws. PL Cap included to prevent dust from entering sensor area when lens is not attached. If you are using the L-Mount to PL Mount Pro (Panasonic and Leica) without a camera cage, you can use the included WC Lens Adapter Universal Support Foot to attach directly to the bottom of your camera and lens mount. This allows all the weight to be transferred from the lens mount to the bottom of the camera to avoid any flexing or damage that could occur when using heavier lenses. In our factory, we set the flange focus using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The Wooden Camera L-Mount to PL Mount Pro adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Includes (2) M4x20mm socket cap screw(1) 1/4-20 Support Foot(1) Universal Support Foot Shim Setstackable to achieve necessary thickness Silver .0127mm (0.0005")Amber .0254mm (0.001")Purple .0381mm (0.0015")Red .0508mm (0.002")Green .0762mm (0.003")Tan .1016mm (0.004")Blue .127mm (0.005") Specifications Weight: 251g Dimensions: 85.1 x 81.8 x 48 mm

Vocas Sony E-Mount to PL Lens Mount Adapter SKU: 0900-0024 Sony E-mount to PL adapter (Excl. 15mm support!). This adapter allows the use of PL type lenses on cameras that use a Sony E-mount lens mount, such as the Sony NEX-FS100.