Wooden Camera WC V-Mount Plate for ARRI Alexa Mini

Wooden Camera WC Gold Mount (Alexa Mini) SKU: 207600 Wooden Camera brand Gold Mount utilizing an utilizing authentic Anton Bauer plate and ARRI Alexa Mini LEMO connector. This plate is also compatible with the ARRI AMIRA. WC Gold Mount (Alexa Mini) Features 16" cable exits the right side of the plate allowing easy insertion into the camera2 x D-Tap ports for accessory power To mount the Wooden Camera WC Gold Mount onto the Alexa Mini, we recommend the below combination Quick Cage (Alexa Mini + LW) - cage that surrounds the camera and provides standard mounting pointsBattery Slide - an adjustable battery mounting plate that attaches a V-Mount or Gold Mount plate to Quick Cage (Alexa Mini) WC Gold Mount (Alexa Mini) Specifications Weight 227 gDimensions 143.2 mm x 92 mm x 21.9 mm

Wooden Camera WC V-Mount (A7, A7r, A7s) SKU: 181200 Wooden Camera V-Mount plate utilizing an IDX V-Mount and Sony A7 connector. Works with Sony A7, A7r, A7s, A7rII, A7sII and other Alpha compatible cameras. Regulator integrated in the plate provides correct voltage to camera. 2x D-Taps on plate provide 12-16V depending on battery connectedCable length: 16 inches (40cm) Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. Combine with Battery Slide (sold separately) for adjustable battery system.

Wooden Camera WC V-Mount (Dual D-Tap) SKU: 191300 Wooden Camera brand V-Mount plate utilizing an IDX V-Mount. Plate provides unregulated 12V power (12-16V depending on battery connected) through 2x D-Taps on plate. Great for use with Director's Monitor Cage or combine with Battery Slide (sold separately) for adjustable battery system. Weight 234 gDimensions 142.4 mm x 90.8 mm x 21.3 mm

Wooden Camera WC V-Mount (C300mkII) SKU: 214700 Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and Canon C300mkII LEMO connector. 12" cable exits the right side of the plate allowing easy insertion into the camera. Includes 2x D-Tap ports for accessory power To mount the WC V-Mount onto the C300mkII, the below combination is recommended Fixed Base (C100, C300, C500) - baseplate that holds 15mm lightweight rods at correct lens heightBattery Slide - an adjustable battery mounting plate that attaches a V-Mount or Gold Mount plate to Rod ClampsRod Clamp (15mm LW) - mounts Battery Slide to two 15mm lightweight rods WC V-Mount (C300mkII) Specifications Weight 227gDimensions 143.2 mm x 92 mm x 21.9 mm

Wooden Camera WC V-Mount (XLR 4 Pin) SKU: 179200 Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and standard 4 pin XLR power connector. Plate provides unregulated 12V power (12-16V depending on battery connected). Great for cameras like Blackmagic Studio Camera (BMSC), Panasonic GH4-YAGH, Sony F55/F5, AJA CION, and more. 2x D-Taps on plate provide 12-16V depending on battery connected Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). Weight 234 gDimensions 142.4 mm x 90.8 mm x 21.3 mmCable length 40 cm

Wooden Camera Arri Alexa LF 24V Sharkfin Battery Bracket SKU: 262900 ARRI Alexa LF 24V Sharkfin Battery Bracket (V-Mount) allows for two standard voltage V-Mount batteries to power the Alexa LF, which requires 24V. Key features include hot swapping capability between batteries and the DC input, 4x D-Tap connectors that remain powered with at least one battery installed, percentage information transmitted to the camera when smart batteries are used, knobs for tool-less installation with a hidden allen wrench for additional tightening, and a protective cover plate for when battery bracket is not in use. Hot Swapping and Normal Operation Since the Alexa LF requires high current for normal operation, two batteries capable of 10A sustained draw should be installed at all times. At camera idle, when no lens motors are moving, batteries can be swapped one at a time while the camera and accessories remain powered. It is also possible to hot swap between block battery and onboard batteries. 4x D-Tap Accessory Power 2x D-Taps are available on each power plate in various positions. All D-Taps remain powered even when a single battery is installed. Note that D-Taps will not function when only powering the camera from a block battery while no onboard batteries are installed. Percentage Display in Camera The Sharkfin module will read SMBUS and reverse SMBUS batteries, combine the data, and provide a summarized information stream to the camera. This data is displayed in the UI on the side of the camera body, LCD, EVF, etc. Tool-less Installation and Protective Cover The system has four M3 thumbscrews and two locating points which attach directly to the back of the camera. The allen wrench can be used to complete the installation and stored neatly on the plate for future use. The included cover plate is great for protecting the pogo pins during transit. Please note that voltage will be present on the pogo pins when a battery is installed so do not attach a battery if the bracket is not installed on the camera. Weight: 907 gDimensions: 140 mm x 146 mm x 95.3 mm

Wooden Camera WC V-Mount (Epic/Scarlet) SKU: 167000 Wooden Camera WC V-Mount plate utilizing an IDX V-Mount and RED Epic/Scarlet LEMO connector. This plate is wired correctly to display RED Brick and smart V-mount battery percentage on displays. 8" cable exits the right side of the plate allowing easy insertion into the camera. Design allows minimal cable excess while still being able to reach additional modules when necessary. 2x D-Tap ports for accessory power To mount the WC V-Mount onto the back of the Epic/Scarlet one of these items is required Quick Back v2 - a quick release plate that can attach to the back of the brain or any RED moduleFixed Back - a bolt on battery mount that can only attach to the brain