Zacuto Canon C400 Z-Finder Frame

Zacuto Canon C400 Z-FinderSKU: Z-FIND-C4The Zacuto Canon C400 Z-Finder is an optical viewfinder specifically designed to attach to the Canon C400 LCD Monitor to block glare, magnify and give you the form factor of a viewfinder. This Z-Finder will magnify the LCD screen by 2.5x and has a diopter wheel for specific focus tuning.If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder and extend the Z-Finder glass further away from the LCD screen for people who are farsighted. The diopter range with the included lens and extender frames is -2.5 to 0. If you need more adjustment than the Extender Frames provide, you can purchase drop in diopters for further diopter adjustment. The interchangeable diopters, -1, +1, +2, +3 and +4, correct the focus to your vision for perfect clarity. This package comes with an locking cap to use the Canon C400 articulating monitor mount.If you’d like a more robust mount you can use the C400 Z-Finder Rosette mount and Axis Mini or Axis Micro and still use Canon’s top handle to mount it. If you are a proud owner of the legendary Zacuto Z-Finder Pro 2.5, this is the same Z-Finder. You can just buy the Canon C400 Z-Finder Frame.

Zacuto Z-Finder Pro 2.5x Z-FIND-PRO2 The Z-Finder Pro 2.5x is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 2.5x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against our comfy, large eyecup. The Zacuto Z-Finder Pro 2.5x comes with a 40 mm diameter Zacuto optical designed lens, anti-fog coated protective covers, and a mounting system designed for 3” LCD screens. (A 3.2” version is available.) The diopter allows you to dial in the focus to match your eye. If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder Pro and extend the Z-Finder glass further away from the LCD screen for people who are farsighted. The 2.5x magnification is recommended in particular for users who are near sighted and may have problems seeing long distances. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). Users with 20/20 vision can use either magnification. It is a personal preference. This is the model we use with our electronic viewfinder packages. Your camera model is irrelevant when choosing between the 2.5x and 3x magnifications. If you are particularly far sighted (wear strong reading glasses) or are just looking for the biggest magnification possible we recommend the Z-Finder Pro 3x. The Z-Finder Pro attaches to your camera with the included Gorilla Baseplate and Z-Finder 3" Mounting Frame for Small DSLR Bodies. (The Z-Finder Mounting Frame can also be attached to our DSLR Baseplate). The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20” screw and has ¼ 20” screw holes underneath to attach a tripod plate. The metal Z-Finder Mounting Frame attaches to the Gorilla Baseplate using the provided red thumb screws. The Z-finder itself pops on and off the Z-finder Mounting frame. No magnets or glue are used. The metal Z-Finder Mounting Frame is backed with rubber to prevent scratching or slippage. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release. Z-Finder Pro includes Z-Finder Pro loupe with 2.5x magnification and diopterThree (3) Extender FramesGorilla Baseplate and 3” Mounting Frame for Small DSLR Bodies (Canon 5D M2/7D/60D-Nikon D300/D90/D7000 type cameras)Lanyard and Lanyard Hook Lens Cap, Sun Mask, and protective bootZ-Finder Dust Cover